Experimental investigations of drying droplets containing microparticles and mixtures of Poly(ethylene oxide) microparticles

Msambwa, Y., 2015. Experimental investigations of drying droplets containing microparticles and mixtures of Poly(ethylene oxide) microparticles. PhD, Nottingham Trent University.

Yohana Msambwa PhD thesis final version.pdf - Published version

Download (7MB) | Preview


Ring-stains are seen when droplets of liquid containing particles are left to dry on a surface: a pinned contact line leads to outward radial flow, which is enhanced by the diverging evaporative flux at the contact line. As a result, suspended particles in the drops are transported to the edge of the droplet, and deposited in a circular stain. In the first section of this study, we investigated how the width and height of ring in water droplets containing suspensions of polystyrene microparticles with diameters ≤0.5μm vary with experimentally controlled parameters, including particle size, contact angle, concentration, evaporation rate and orientation of the droplets. Our studies found, for the first time, that the drying rate plays an important role in determining the shape of the final deposit which may contribute to a better understanding of a coffee ring effect. At low drying rates, nearly all the particles are deposited in the ring and the width and height of the ring follow a power law. However there is a significant deposition of particles in the center of the droplets at the fastest drying rates. In the second section, we investigated the drying dynamics of the droplets using optical microscopy and optical coherence tomography both at low and high drying rates. The results indicate that, as expected, the outward capillary flow to the edge dominates for 0.5m and 2m particles at low drying rates. However, at the highest drying rates, particle flow is reversed towards the center for 0.5m and 2m particles and is attributed to Marangoni flow driven by a high temperature gradient between the edge and apex of the drop. For 5m at low drying rates, sedimentation is found to be more significant than outward flow and at higher drying rates the outward flow dominates over sedimentation. The final section involved mixing polystyrene microparticles with Poly(ethylene oxide)(PEO) polymer. Drying droplets of aqueous solutions of PEO is known to form either the familiar "coffee-ring" or a tall "central pillar" depending on the concentration of the polymer, its molecular weight, humidity and drying rate. The objective of this study was to investigate the effect of particle sizes and concentration on drying of water droplets containing a water/PEO solution mixture. Results show that the four stages in the pillar forming of PEO drying process is disrupted, and even completely destroyed, with the additional of polystyrene microparticles. The extent at which the pillars are destroyed depends on both the concentration and sizes of the polystyrene microparticles as well as on PEO concentration in the mixture. A range of deposit was observed, as a result, including the standard particle ring stain, polymer pillars and puddles. We present a novel and versatile technique, using the skewness of the height profile, to distinguish quantitatively between the various deposits. We show that this simple parameter seems to illustrate the observed deposit types, with a positive skewness for pillars, close to zero for flat puddle deposits and negative skewness for ring stains. The skewness values have the potential to be useful for characterizing deposits in a wide variety of system.

Item Type: Thesis
Creators: Msambwa, Y.
Date: May 2015
Rights: This work is the intellectual property of the author, and may also be owned by the research sponsor(s) and/or Nottingham Trent University. You may copy up to 5% of this work for private study, or personal, non-commercial research. Any re- use of the information contained within this document should be fully referenced, quoting the author, title, university, degree level and pagination. Queries or requests for any other use, or if a more substantial copy is required, should be directed in the first instance to the author.
Divisions: Schools > School of Science and Technology
Record created by: Linda Sullivan
Date Added: 13 Jul 2016 11:30
Last Modified: 13 Jul 2016 11:30
URI: https://irep.ntu.ac.uk/id/eprint/28136

Actions (login required)

Edit View Edit View


Views per month over past year


Downloads per month over past year