Items where Author is "Boutaud, G"
Up a level |
Journal article
TSAKONAS, C., WAKEHAM, S., CRANTON, W.M., THWAITES, M., BOUTAUD, G., FARROW, C., KOUTSOGEORGIS, D.C. and RANSON, R., 2016. Transparent and Flexible Thin Film Electroluminescent Devices Using HiTUS Deposition and Laser Processing Fabrication. IEEE Journal of the Electron Devices Society, 4 (1), pp. 22-29. ISSN 2168-6734
WAKEHAM, S.J., TSAKONAS, C., CRANTON, W.M., THWAITES, M.J., BOUTAUD, G. and KOUTSOGEORGIS, D.C., 2011. Laser annealing of thin film electroluminescent devices deposited at a high rate using high target utilization sputtering. Semiconductor Science and Technology, 26 (4), 045016. ISSN 0268-1242
WAKEHAM, S., THWAITES, M., TSAKONAS, C., CRANTON, W., RANSON, R., BOUTAUD, G. and KOUTSOGEORGIS, D.C., 2010. A new reactive sputtering technique for the low temperature deposition of transparent light emitting ZnS:Mn thin films. Physica Status Solidi A, 207 (7), pp. 1614-1618. ISSN 1862-6300
BOUTAUD, G., CRANTON, W.M., KOUTSOGEORGIS, D.C., RANSON, R.M., TSAKONAS, C. and THOMAS, C.B., 2009. Growth optimisation of ZnS:Mn thin film phosphors for high intensity miniature electroluminescent displays. Materials Science and Engineering B, 165 (3), pp. 202-206.
Conference contribution
WAKEHAM, S., THWAITES, M., TSAKONAS, C., CRANTON, W., RANSON, R., BOUTAUD, G. and KOUTSOGEORGIS, D., 2009. A new technique for the high rate deposition of EL devices onto plastic substrates. In: Proceedings of the 29th International Display Research Conference, Rome, Italy, 14-17 September 2009.
BOUTAUD, G., CRANTON, W.M., THOMAS, C.B., RANSON, R.M., WILSON, S. and WAGLAND, S., 2005. Developing a thermal model for the laser processing of inkjet printed transparent conducting thin films for use in display fabrication [poster presentation]. In: SID Euro Display 2005, Edinburgh International Conference Centre, Edinburgh, 19-22 September 2005, Edinburgh.
WILSON, S.L., CRANTON, W.M., RANSON, R.M., KOUTSOGEORGIS, D.C., BOUTAUD, G., WAGLAND, S., STOUT, S., SCOTT, J., MOSELEY, A., SPILLER, A. and LIPIEC, S., 2005. Optimization of the electrical and optical properties of ink-jet-printed SnO2:Sb using thermal annealing and excimer-laser processing. In: Proceedings of the Society for Information Display International Symposium, Boston, USA, May, 2005.
WILSON, S.L., CRANTON, W.M., RANSON, R., KOUTSOGEORGIS, D.C., MOSLEY, A., THOMAS, C.B., BOUTAUD, G., WAGLAND, S., MASTIO, E.A., LIPIEC, S., SPILLER, A., SCOTT, J. and STOUTE, S., 2005. Optimization of the electrical and optical properties of ink-jet-printed SnO2:Sb using thermal annealing and excimer-laser processing [poster presentation]. In: Photonics Conference, London, June 2005.
WAGLAND, S.T., CRANTON, W.M., RANSON, R.M., WILSON, S.L. and BOUTAUD, G., 2005. An investigation into the use of inkjet printed transparent conductors for electroluminescent displays [poster presentation]. In: SID Euro Display 2005, Edinburgh International Conference Centre, Edinburgh, 19-22 September 2005, Edinburgh.
Thesis
BOUTAUD, G., 2010. Growth optimisation and laser processing of thin film phosphors for electroluminescent displays. PhD, Nottingham Trent University.