Items where Author is "Ali, U"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 10.

Journal article

EHSAN, M., ALI, U., SHER, F., ABUBAKAR, H.M. and BASIT, M.F.U., 2023. Dynamic and steady-state simulation study for the stabilization of satural gas condensate and CO2 removal through heating and pressure reduction. ChemEngineering, 7 (5): 78. ISSN 2305-7084

HASSAN, M.H.A., SHER, F., SEHAR, S., RASHEED, T., ZAFAR, A., SULEJMANOVIĆ, J., ALI, U. and RASHID, T., 2021. Hydrothermally engineered enhanced hydrate formation for potential CO2 capture applications. Journal of Environmental Chemical Engineering, 9 (6): 106515. ISSN 2213-3437

SHER, F., HAZAFA, A., MARINTSEVA, K., RASHEED, T., ALI, U., RASHID, T., BABU, A. and KHZOUZ, M., 2021. Fully solar powered Doncaster Sheffield Airport: energy evaluation, glare analysis and CO2 mitigation. Sustainable Energy Technologies and Assessments, 45: 101122. ISSN 2213-1388

QURESHI, Y., ALI, U. and SHER, F., 2021. Part load operation of natural gas fired power plant with CO2 capture system for selective exhaust gas recirculation. Applied Thermal Engineering, 190: 116808. ISSN 1359-4311

ISHAQ, H., ALI, U., SHER, F., ANUS, M. and IMRAN, M., 2021. Process analysis of improved process modifications for ammonia-based post-combustion CO2capture. Journal of Environmental Chemical Engineering, 9 (1): 104928.

ABU HASSAN, M.H., SHER, F., FAREED, B., ALI, U., ZAFAR, A., BILAL, M. and IQBAL, H.M.N., 2021. Sustainable hydrates for enhanced carbon dioxide capture from an integrated gasification combined cycle in a fixed bed reactor. Industrial & Engineering Chemistry Research, 60 (30), pp. 11346-11356. ISSN 0888-5885

SHER, F., IQBAL, S.Z., ALBAZZAZ, S., ALI, U., MORTARI, D.A. and RASHID, T., 2020. Development of biomass derived highly porous fast adsorbents for post-combustion CO2 capture. Fuel, 282: 118506. ISSN 0016-2361

ZAFAR, T., KAMAL, K., SHEIKH, Z., MATHAVAN, S., ALI, U. and HASHMI, H., 2017. A neural network based approach for background noise reduction in airborne acoustic emission of a machining process. Journal of Mechanical Science and Technology, 31 (7), pp. 3171-3182. ISSN 1738-494X

Chapter in book

ZAFAR, T., KAMAL, K., SHEIKH, Z., MATHAVAN, S., JEHANGHIR, A. and ALI, U., 2015. Tool health monitoring for wood milling process using airborne acoustic emission. In: Q.-S. JIA, M.P. FANTI, D. POPA and C. SEATZU, eds., Proceedings of the 2015 IEEE International Conference on Automation Science and Engineering (CASE), Gothenburg, Sweden, 24-28 August 2015. Piscataway, NJ: Institute of Electrical and Electronic Engineers (IEEE), pp. 1521-1526. ISBN 9781467381840

ZAFAR, T., KAMAL, K., KUMAR, R., SHEIKH, Z., MATHAVAN, S. and ALI, U., 2015. Tool health monitoring using airborne acoustic emission and a PSO-optimized neural network. In: P. JĘDRZEJOWICZ, N.T. NGUYEN, T.-P. HONG and I. CZARNOWSKI, eds., Proceedings of the 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF), Gdynia, Poland, 24-26 June. Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE), pp. 271-276. ISBN 9781479983223

This list was generated on Fri Mar 29 00:13:36 2024 UTC.