Items where Author is "Gentle, CR"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 27.

HUANG, Y.H., GENTLE, C.R. and HULL, J.B., 2004. A comprehensive 3-D analysis of polymer melt flow in slit extrusion dies. Advances in Polymer Technology, 23 (2), pp. 111-124. ISSN 0730-6679

ZHAN, D., SU, D. and GENTLE, C.R., 2004. A novel 3D modelling approach utilizing virtual reality machning principles. In: Proceedings of the 11th World Congress in Mechanism and Machine Science (IFToMM2003), Tianjin, China.

LAI, H., YAN, Y.Y. and GENTLE, C.R., 2003. Calculation procedure for conjugate viscous flows about and inside single bubbles. Numerical Heat Transfer Part B - Fundamentals, 43 (3), pp. 241-265. ISSN 1040-7790

GENTLE, C.R., CRISP, A.R. and LORD, J., 2003. Inclusive product design (ethics and sustainability): project teaching using a major study project as the vehicle (School of Engineering, Nottingham Trent University). In: Conference, organised by IED working group for Design Education Teaching, Bournemouth University, September 2003, Bournemouth.

RIDGWAY, J.S., HULL, J.B. and GENTLE, C.R., 2003. A PRIME approach for the moulding of conduit ceramic parts. Journal of Materials Processing Technology, 133, pp. 181-188. ISSN 0924-0136

YAN, Y.Y., LAI, H., GENTLE, C.R. and SMITH, J.R., 2002. Numerical analysis of fluid flows inside and around a liquid drop using an incorporation of multi-block iteration and moving mesh. Chemical Engineering Research & Design, 80 (3), pp. 325-331. ISSN 0263-8762

GOLINSKI, W.Z. and GENTLE, C.R., 2001. Biomechanical simulation of whiplash - some implications for seat design. International Journal of Crashworthiness, 6 (4), pp. 573-583. ISSN 1358-8265

GENTLE, C.R., GOLINSKI, W.Z. and HEITPLATZ, F., 2001. Computational studies of 'whiplash' injuries. Proceedings of the Institution of Mechanical Engineers Part H-Journal of Engineering in Medicine, 215 (2), pp. 181-189. ISSN 0954-4119

RIDGWAY, J.S., HULL, J.B. and GENTLE, C.R., 2001. Development of a novel binder system for manufacture of ceramic heart valve prostheses. Journal of Materials Processing Technology, 109, pp. 161-167. ISSN 0924-0136

SU, D., YANG, F. and GENTLE, C.R., 2001. Finite element modelling and load share analysis for involute worm gears with localised tooth contact. Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, 215, pp. 805-816.

SONG, Y., SU, D., LANAKIEV, A. and GENTLE, C.R., 2001. Loaded multi-tooth contact analysis of spiroid gears by surface-to-surface contact analysis using Finite Element method. In: International Conference on Mechanical Transmission, Chonqing, China, 5-9 April 2001, Chonqing, China.

SU, D., SONG, Y. and GENTLE, C.R., 2001. Optimum design and numerical simulation of helicon gears with localised tooth contact. In: International Conference on Mechanical Transmission, Chonqing, China, 5-9 April 2001, Chonqing, China.

SU, D., SONG, Y. and GENTLE, C.R., 2001. Three-dimensional loaded multi-tooth contact analysis of spiroid gears. International Journal of Gearing and Transmissions (3), pp. 83-90.

ELMER, K.F. and GENTLE, C.R., 2001. A parsimonious model for the proportional control valve. Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, 215 (11), pp. 1357-1363. ISSN 0954-4062

SONG, Y., SU, D. and GENTLE, C.R., 2000. 3D virtual manufacturing of worm gear drives. In: Proceedings of the International Conference on Gearing, Transmission and Mechanical Systems, Nottingham.

SU, D., YANG, F. and GENTLE, C.R., 2000. Analysis of tooth stresses, mesh stiffness and loaded transmission errors of involute worm gears. International Journal of Gearing and Transmissions (3), pp. 36-44.

SU, D., YANG, F. and GENTLE, C.R., 2000. Finite element analysis for ZI worm gears with localised tooth contact. In: Proceedings of the ASME Design Engineering Technical Conferences, Baltimore.

YANG, F., SU, D. and GENTLE, C.R., 2000. Mesh stiffness and tooth stress calculation for worm gears using finite element method. In: Proceedings of the International Conference on Gearing, Transmission and Mechanical Systems, Nottingham.

SU, D., SONG, Y. and GENTLE, C.R., 2000. Numerical analysis of spiroid gears with localised tooth contact manufactured by a new economic method. International Journal of Gearing and Transmissions (3), pp. 38-46.

SU, D., SONG, Y. and GENTLE, C.R., 2000. Numerical modelling of spiroid gears with localized tooth contact. In: Proceedings of the International Conference on Gearing, Transmission and Mechanical Systems, Nottingham.

SONG, Y., SU, D. and GENTLE, C.R., 2000. Optimum design of spiroid gears with the aid of 3D virtual manufacturing. In: Proceedings of the 4th International Conference on Adaptive Computing in Design and Manufacture, Plymouth.

SU, D., SONG, Y. and GENTLE, C.R., 2000. A novel approach of obtaining localised tooth contact for spiroid gear drives. In: Proceedings of the ASME Design Engineering Technical Conferences, Baltimore.

SU, D., YANG, F. and GENTLE, C.R., 1999. Computer aided design and simulation of worm gearing with localised tooth contact. In: British Gear Association Annual Congress, Telford, 18 March 1999, Telford.

SU, D., YANG, F., GENTLE, C.R. and REITH, D., 1998. Computer aided design of worm gearing with less sensitivity to manufacture and assembly errors. In: Proceedings of the 1998 ASME Design Engineering Technical Conferences, Atlanta, USA.

CRISP, A.R. and GENTLE, C.R., 1998. Design of an improved tricycle running frame for athletes with cerebral palsy. In: Proceedings of Mechanics in Design '98, Nottingham.

SU, D., YAN, F. and GENTLE, C.R., 1998. Optimum design of worm gearing with localised tooth contact. International Journal of Gearing and Transmissions (1), pp. 6-19.

YANG, F., WANG, X., SU, D. and GENTLE, C.R., 1998. A numerical method to obtain preferable localised tooth contact for cylindrical worm gearing. In: Proceedings of the International Conference on Mechanics in Design, Nottingham.

This list was generated on Thu Mar 28 11:21:27 2024 UTC.