# Items where Author is "Sackfield, A"

Up a level |

**35**.

## Journal article

HILLS, D.A., SACKFIELD, A. and PAYNTER, R.J.H.,
2009.
Simulation of fretting wear in half-plane geometries: part 1 - the solution for long term wear.
*Journal of Tribology*, 131 (3), p. 31401.
ISSN 0742-4787

BARBER, J.R., CIAVARELLA, M., AFFERRANTE, L. and SACKFIELD, A.,
2008.
Effect of small harmonic oscillations during the steady rolling of a cylinder on a plane.
*International Journal of Mechanical Sciences*, 50 (9), pp. 1344-1353.
ISSN 0020-7403

DINI, D., BARBER, J.R., CHURCHMAN, C.M., SACKFIELD, A. and HILLS, D.A.,
2008.
The application of asymptotic solutions to contact problems characterised by logarithmic singularities.
*European Journal of Mechanics A - Solids*, 27 (5), pp. 847-858.
ISSN 0997-7538

DINI, D., SACKFIELD, A. and HILLS, D.A.,
2008.
An axi-symmetric Hertzian Contact subject to cyclic shear and severe wear.
*Wear*, 265 (1112), pp. 1919-1922.
ISSN 0043-1648

SACKFIELD, A., DINI, D. and HILLS, D.A.,
2007.
Contact of a rotating wheel with a flat.
*International Journal of Solids and Structures*, 44.
ISSN 3304-3316

CHURCHMAN, C.M., SACKFIELD, A. and HILLS, D.A.,
2006.
Asymptotic solutions for contact problems: the effect of an internal discontinuity in surface profile.
*Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science*, 220 (4), pp. 387-391.
ISSN 0022-2542

SACKFIELD, A., HILLS, D.A. and CHURCHMAN, C.M.,
2006.
Discussion of 'A paradox in sliding contact problems with friction.'.
*Journal of Applied Mechanics*, 73 (5), pp. 884-886.
ISSN 0021-8936

SACKFIELD, A., HILLS, D.A. and HUI, Q.,
2006.
Side-contact of sharp indenters, including the effects of friction.
*International Journal of Mechanical Sciences*, 49 (5), pp. 567-576.
ISSN 0022-7403

SACKFIELD, A., DINI, D. and HILLS, D.A.,
2006.
The contact problem for a wheel having a flat.
*Wear*, 261, pp. 1265-1270.

CHURCHMAN, C.M., SACKFIELD, A. and HILLS, D.A.,
2006.
A semi-infinite chamfered contact and its application to almost complete contacts.
*International Journal of Solids and Structures*, pp. 22-23.
ISSN 7048-7060

SACKFIELD, A., DINI, D. and HILLS, D.A.,
2005.
Comprehensive bounded asymptotic solutions for incomplete contacts in partial slip.
*Journal of the Mechanics and Physics of Solids*, 53 (2), pp. 437-454.
ISSN 0022-5096

DINI, D., SACKFIELD, A. and HILLS, D.A.,
2005.
Comprehensive bounded asymptotic solutions for incomplete contacts in partial slip.
*Journal of the Mechanics and Physics of Solids*, 53 (2), pp. 437-454.
ISSN 0022-5096

SACKFIELD, A., DINI, D. and HILLS, D.A.,
2005.
The finite and semi-infinite tilted flat but rounded punch.
*International Journal of Solids and Structures*, 42, pp. 4988-5009.
ISSN 0020-7683

SACKFIELD, A., DINI, D. and HILLS, D.A.,
2005.
The tilted shallow wedge problem.
*European Journal of Mechanics A-Solids*, 24, pp. 919-928.
ISSN 0997-7538

MUGADU, A., SACKFIELD, A. and HILLS, D.A.,
2004.
Analysis of a rocking and walking punch - Part 1. Initial transient and steady state.
*Journal of Applied Mechanics*, 71, pp. 225-233.

SACKFIELD, A., MUGADU, A. and HILLS, D.A.,
2004.
Analysis of a rocking and walking punch.Part 1- Initial transient and steady state.
*Journal of Applied Mechanics*, 71, pp. 225-233.
ISSN 0021-8936

SACKFIELD, A. and TRUMAN, C.E.,
2004.
Some analytical results for plane contact problems.
*Journal of Strain Analysis for Engineering Design*, 39 (4), pp. 329-338.
ISSN 0309-3247

MUGADU, A., HILLS, D.A., BARBER, J.R. and SACKFIELD, A.,
2004.
The application of asymptotic solutions to characterising the process zone in almost complete frictional contacts.
*International Journal of Solids and Structures*, 41 (2), pp. 385-397.
ISSN 0020-7683

SACKFIELD, A., HILLS, D.A. and MCKELLAR, D.K.,
2003.
Modelling plasticity using strain nuclei: discretization of the dislocation field by uniform triangles.
*Journal of Strain Analysis for Engineering Design*, 38 (2), pp. 95-102.
ISSN 0309-3247

MCKELLAR, D.K., HILLS, D.A. and SACKFIELD, A.,
2003.
Modelling plasticity using strain nuclei: discretization of the dislocation field by uniform, triangles.
*Journal of Strain Analysis for Engineering Design*, 38 (2), pp. 95-102.
ISSN 0309-3247

SACKFIELD, A., MUGADU, A., HILLS, D.A. and BARBER, J.R.,
2003.
The application of asymptotic solutions to charactersing the process zone in almost complete frictional contacts.
*Journal of the Mechanics and Physics of Solids*, 51.
ISSN 0022-5096

TRUMAN, C.E., SACKFIELD, A. and HILLS, D.A.,
2002.
Torsional loading of a finite shrink-fit shaft.
*Proceedings - Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science*, 216 (11), pp. 1109-1115.
ISSN 0954-4062

SACKFIELD, A., MUGADU, A. and HILLS, D.A.,
2002.
The influence of an edge radius on the local stress field at the edge of a complete fretting contact.
*International Journal of Solids and Structures*, 39 (17), pp. 4407-4420.
ISSN 0020-7683

SACKFIELD, A., BARBER, J.R., HILLS, D.A. and TRUMAN, C.E.,
2002.
A shrink-fit shaft subject to torsion.
*European Journal of Mechanics A-Solids*, 21 (1), pp. 73-84.
ISSN 0997-7538

SACKFIELD, A., TRUMAN, C.E. and HILLS, D.A.,
2002.
A stepped, shrink-fitted shaft subject to torsion.
*Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science*, 216 (10), pp. 997-1004.
ISSN 0954-4062

TRUMAN, C.E., BLAKE, J.J. and SACKFIELD, A.,
2001.
Analysis of a self-tracking rolling element bearing.
*Journal of Tribology*, 123, pp. 243-250.
ISSN 0742-4787

SACKFIELD, A., BLAKE, J.J. and TRUMAN, C.E.,
2001.
Analysis of a self-tracking rolling element bearing.
*Journal of Tribology - Transactions of the Asme*, 123 (2), pp. 243-247.

TRUMAN, C.E., BLAKE, J.J. and SACKFIELD, A.,
2001.
Analysis of a self-tracking rolling element bearing.
*Journal of Tribology - Transactions of the Asme*, 123 (2), pp. 243-247.
ISSN 0742-4787

TRUMAN, C.E. and SACKFIELD, A.,
2001.
Closed for solutions for the stress fields induced by blunt wedge shaped indentors in elastic half-planes.
*Journal of Applied Mechanics*, 68, pp. 817-819.

TRUMAN, C.E. and SACKFIELD, A.,
2001.
Closed-form solutions for the stress fields induced by blunt wedge-shaped indenters in elastic half-planes.
*Journal of Applied Mechanics-Transactions of the Asme*, 68 (5), pp. 817-819.
ISSN 0021-8936

SACKFIELD, A., TRUMAN, C.E. and HILLS, D.A.,
2001.
The tilted punch under normal and shear load (with application to fretting tests).
*International Journal of Mechanical Sciences*, 43 (8), pp. 1881-1892.
ISSN 0020-7403

SACKFIELD, A., POLIAKOFF, J.F., THOMAS, P.D. and ORTON, P.A.,
2000.
The incremental motion encoder: a new approach to high-speed monitoring of rotating shafts.
*Measurement and Control*, 33, pp. 49-53.
ISSN 0020-2940

TRUMAN, C.E., HILLS, D.A. and SACKFIELD, A.,
2000.
A procedure for the solution of general contact problems for the elastic half-space.
*Journal of Strain Analysis for Engineering Design*, 35 (6), pp. 559-565.
ISSN 0309-3247

SACKFIELD, A., TRUMAN, C.E. and HILLS, D.A.,
2000.
A procedure for the solution of general contact problems for the elastic half-space.
*Journal of Strain Analysis for Engineering Design*, 35 (6), pp. 559-565.
ISSN 0309-3247

## Chapter in book

SACKFIELD, A. and HILLS, D.A.,
2002.
Analysis of a walking punch.
In: J.A.C. MARTINS and M.M. MARQUES, eds.,
*Contact mechanics: Proceedings of the 3rd Contact Mechanics International Symposium, Praia Da Consolacao, Peniche, Portugal, June 17-21, 2001 (Solid Mechanics & Its Applications).*
Kluwer Academic Publishers, pp. 169-179.
ISBN 1402008112