Items where Author is "Ford, P"

FORD, P., FISHER, J., PAXMAN-CLARKE, L. and MINICHIELLO, M., 2020. Effective wayfinding adaptation in an older National Health Service hospital in the United Kingdom: insights from mobile eye-tracking. Design for Health. ISSN 2473-5140

FORD, P. and FISHER, J., 2019. Designing consumer electronic products for the circular economy using recycled Acrylonitrile Butadiene Styrene (ABS): a case study. Journal of Cleaner Production, 236: 117490. ISSN 0959-6526

MEADWELL, J., PAXMAN-CLARKE, L., TERRIS, D. and FORD, P., 2019. In search of a performing seal: rethinking the design of tight-fitting respiratory protective equipment facepieces for users with facial hair. Safety and Health at Work. ISSN 2093-7911

FORD, P., 2019. Using 100% recycled ABS in plastic products (Phase 1, background research and initial concept design).

FORD, P., 2019. Using 100% recycled ABS in plastic products (Phase 2, prototyping development & testing).

THURLOW, L., FORD, P. and HUDSON, G., 2018. Skirting the sketch: an analysis of sketch inhibition within contemporary design higher education. International Journal of Art & Design Education. ISSN 1476-8062

THURLOW, L. and FORD, P., 2018. An analysis of sketch inhibition within contemporary design education. Universal Journal of Educational Research, 6 (9), pp. 2036-2046. ISSN 2332-3205

THURLOW, L. and FORD, P., 2018. Ideal ideation: a framework for the management of sketch inhibition among undergraduate designers. In: D. MARJANOVIĆ, M. ŠTORGA, S. ŠKEC, N. BOJČETIĆ and N. PAVKOVIĆ, eds., Proceedings of the DESIGN 2018, 15th International Design Conference, Dubrovnik, Croatia, 21-24 May 2018. Glasgow: The Design Society, pp. 2517-2528. ISBN 9789537738594

FORD, P. and TERRIS, D., 2018. An intimate approach to the management and integration of design knowledge for small firms. Design Management Journal, 12 (1), pp. 58-70. ISSN 1942-5074

FORD, P. and TERRIS, D., 2017. NPD, design and management for SME's. In: E. BOHEMIA, C. DE BONT and L.S. HOLM, eds., Conference proceedings of the Design Management Academy: Research Perspectives on Creative Intersections, Hong Kong, 7-9 June 2017. Vol. 1. Glasgow: The Design Society, pp. 325-341. ISBN 9781912294114

ARMELLINI, J. and FORD, P., 2017. Uniquely for you: the individualised avenue for longer product lifetimes. In: C.A. BAKKER and R. MUGGE, eds., PLATE: Product Lifetimes And The Environment 2017 Conference proceedings, Delft, The Netherlands, 8-10 November 2017. Research in design (9). Amsterdam: IOS Press, pp. 20-24. ISBN 9781614998198

THURLOW, L. and FORD, P., 2017. Where have all the ideas gone? An anatomy of sketch inhibition in student designers. In: E. BOHEMIA, C. DE BONT and L.S. HOLM, eds., Conference proceedings of the Design Management Academy: Research Perspectives on Creative Intersections, Hong Kong, 7-9 June 2017. Vol. 5. Glasgow: The Design Society, pp. 1703-1717. ISBN 9781912294152

FORD, P., MEADWELL, J. and TERRIS, D., 2016. The need for a holistic approach to sustainability in new product development from the designers perspective. In: International Conference on Engineering and Product Design Education, Aalborg University, Aalborg, Denmark, 8-9 September 2016.

ALMURBATI, N., HEADLEY, D., FORD, P. and TAKI, A., 2016. From manual to hybrid, parametric Mashrabiya: digital workflow for the re-envisioning and conservation of Eastern architectural screens and the engagement of digital tectonics. The International Journal of Architectonic, Spatial, and Environmental Design, 10 (2), pp. 29-39. ISSN 2325-1662

FORD, P. and WOUDHUYSEN, J., 2016. Publicly funded design support for small and medium manufacturers: how it might be best managed. In: G. MURATOVSKI, ed., Design for business. Volume 3. Bristol: Intellect, pp. 62-87. ISBN 9781783205431

FORD, P., 2016. An intimate approach to the management and integration of design knowledge for small firms. In: E. BOVA, ed., The 20th DMI: Academic Design Management Conference proceedings. Boston, MA: Design Management Institute, pp. 59-80. ISBN 9780615991528

MEADWELL, J., TERRIS, D. and FORD, P., 2016. A little knowledge is a dangerous thing? Do BSc product design courses discourage collaboration? In: E. BOHEMIA, A. KOVACEVIC, L. BUCK, C. TOLLESTRUP, K. ERIKSEN and N. OVESEN, eds., Proceedings of the 18th International Conference on Engineering and Product Design Education: Design Education: Collaboration and Cross-Disciplinarity (E&PDE 2016), Aalborg, Denmark, 8-9 September 2016. [Glasgow]: Design Society, pp. 40-45. ISBN 9781904670780

FORD, P., MEADWELL, J. and TERRIS, D., 2016. The need for a holistic approach to sustainability in new product development from the designers perspective. In: E. BOHEMIA, A. KOVACEVIC, L. BUCK, C. TOLLESTRUP, K. ERIKSEN and N. OVESEN, eds., Proceedings of the 18th International Conference on Engineering and Product Design Education: Design Education: Collaboration and Cross-Disciplinarity (E&PDE 2016), Aalborg, Denmark, 8-9 September 2016. [Glasgow]: Design Society, pp. 71-76. ISBN 9781904670780

FORD, P., 2015. Using 100% recycled ABS. Phase 2 prototype development and testing. Apendix II. Material strategy for BT plc. Materials comparison testing. Leicester: De Montfort University.

FORD, P., 2015. Additive manufacturing methods: clearing powder from passageway in additive manufactured article. GB2517490.

HEADLEY, D., ALMERBATI, N., FORD, P. and TAKI, A., 2015. From research to practice: exploring 3D printing in production of architectural Mashrabiya. In: R.H. CRAWFORD and A. STEPHAN, eds., Living and learning: research for a better built environment. 49th International Conference of the Architectural Science Association, Melbourne, Victoria, Australia, 2015: proceedings. Melbourne, Victoria: Faculty of Architecture, Building and Planning, The University of Melbourne, pp. 1009-1017.

MEADWELL, J., TERRIS, D. and FORD, P., 2015. Interest in the commercial? Using commercial design projects in pedagogy. In: J. MCCARDLE, G. BINGHAM, A. KOVACEVIC, E. BOHEMIA, D.J. SOUTHEE and B. PARKINSON, eds., Proceedings of the 17th International Conference on Engineering and Product Design Education: Great Expectations: Design Teaching, Research and Enterprise, E and PDE 2015, University of Loughborough, Loughborough, 3-4 September 2015. Glasgow: The Design Society, pp. 50-55. ISBN 9781904670629

FERNANDEZ NAVARRO, J., FORD, P., SCOTT, M., FRADUA, L., ZUBILLAGA, A. and MCROBERT, A., 2014. Attacking and defensive styles of play in elite soccer. In: 19th Annual Congress of the European College of Sport Science, Amsterdam, The Netherlands, 2-5 July 2014.

FORD, P., 2014. BT material strategy and risk assessment. Appendix I. Abridged version. Leicester: De Montfort University.

CHURY, S., KUHN, V., FORD, P. and COTTRELL, L., 2014. Key closure with venting mechanism. GB2508303.

FORD, P., 2014. A tensioning device. GB2505923.

FORD, P., 2014. De Montfort University: Unit 34 - Art and Design: History, Practice and Theory REF 2014: impact case studies. Leicester: De Montfort University.

FORD, P., 2014. De Montfort University: Unit 34 - Design Supporting Business – Research-through-practice by practice as research (Portfolio) REF 2014. Leicester: De Montfort University.

FORD, P., 2014. De Montfort University: Unit 34 - Design, Sustainability and Business – Research-through-practice informed by practise as research (Portfolio) REF 2014. Leicester: De Montfort University.

ALMERBATI, N., FORD, P. and DEAN, L., 2014. From vernacular to personalised and sustainable. In: F. MADEO and M.A. SCHNABEL, eds., Across: architectural research through to practice: 48th International Conference of the Architectural Science Association (ANZAScA). Sydney: Architectural Science Association, pp. 479-490. ISBN 9780992383510

FORD, P. and DEAN, L., 2013. Additive manufacturing in product design education: out with the old in with the new? In: International Conference on Engineering and Product Design Education, Dublin Institute of Technology, Dublin, Ireland, 5-6 September 2013.

RADLOVIC, P.F.M. and FORD, P., 2013. Collaboration barriers in the implementation of design for environment: case studies from small and medium UK enterprises. The International Journal of Environmental Sustainability, 9 (1), pp. 1-6. ISSN 2325-1077

RADLOVIC, P.F.M., LEMON, M. and FORD, P., 2013. Design for the environment in UK product design consultancies and in-house design teams: an explorative case study on current practices and opinions. The International Journal of Design Management and Professional Practice, 6 (2), pp. 73-83. ISSN 2325-162X

FORD, P. and RADLOVIC, P.F.M., 2013. Design, sustainability and the supply chain: design underpinning sustainability. International Journal of Sustainability Policy and Practice, 8 (1), pp. 233-246. ISSN 2325-1166

FORD, P., 2013. Semi automatic venting closure for plastic beer barrels (keg closure with venting mechanism). Czech Republic: Petainer Holdings.

FORD, P. and DAVIES, P., 2012. Managing effective industry knowledge transfer within a higher education establishment. In: L. BUCK, G. FRATEUR, W. ION, C. MCMAHON, C. BAELUS, G. DE GRANDE and S. VERVULGEN, eds., Design education for future wellbeing. Proceedings of the 14th International Conference on Engineering & Product Design Education (E&PDE12) Design Education for Future Wellbeing, Artesis University College, Antwerp, Belguim, 6–7 Sptember 2012. Glasgow: The Design Society, pp. 684-689. ISBN 9781904670360

FORD, P. and WOUDHUYSEN, J., 2012. The fuzzy front end of product design projects: how universities can manage knowledge transfer and creation. In: 2012 International Design Management Research Conference, Boston, Massachusetts, USA, 8-9 August 2012.

FORD, P. and DAVIES, P., 2012. Managing effective industry knowledge transfer within a higher education establishment. In: 14th International Conference on Engineering & Product Design Education, Antwerp, Belgium, 6-7 September 2012.

FORD, P. and MARSDEN, M., 2004. CAD and fostering creativity within the studio environment. In: P. LLOYD, N. ROOZENBURG, C. MCMAHON and E. BRODHURST, eds., The changing face of design education. Proceedings of the Engineering and Product Design Education Conference, Delft University of Technology, Delft, The Netherlands, 2-3 September 2004. Glasgow: The Design Society, pp. 617-624.

FORD, P., 1997. Undertaking a major design project for a significant UK company and the benefits to an industrial design course. In: Proceedings of the 4th National Conference on Product Design Education (PDE 97), Brunel University, 7-8 July 1997. London: Brunel University.

FORD, P., 1996. The value of a product design consultancy within a design faculty and how it can be managed. In: M. HODSKINSON, ed., Proceedings of the 3rd National Conference on Product Design Education (PDE 96), University of Central Lancashire, 15-16 July 1996. Preston: University of Central Lancashire. ISBN 0906694949

FORD, P., 1995. Industrial design consultancy and the student experience. In: Proceedings of the 2nd National Conference on Product Design Education (PDE 95), Coventry University, 10-11 July 1995. Coventry: Coventry University.