Items where Author is "Kaner, J"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 23.

Journal article

RAHEMTULLA, Z., TURNER, A., OLIVEIRA, C., KANER, J., DIAS, T. and HUGHES-RILEY, T., 2023. The design and engineering of a fall and near-fall detection electronic textile. Materials, 16 (5): 1920. ISSN 1996-1944

HUANG, T., ZHOU, C., LUO, X. and KANER, J., 2022. Study of ageing in complex interface interaction tasks: based on combined eye-movement and HRV bioinformatic feedback. International Journal of Environmental Research and Public Health, 19 (24): 16937. ISSN 1661-7827

ZHOU, C., HUANG, T., LUO, X., KANER, J. and FU, X., 2022. Recognition and analysis of an age-friendly intelligent sofa design based on skeletal key-points. International Journal of Environmental Research and Public Health, 19 (18): 11522. ISSN 1661-7827

ZHOU, C., HUANG, T., LUO, X., KANER, J. and FU, X., 2022. Cluster analysis of kitchen cabinet operation posture based on OpenPose technology. International Journal of Industrial Ergonomics, 91: 103352. ISSN 0169-8141

ZHOU, C., YUAN, F., HUANG, T., ZHANG, Y. and KANER, J., 2022. The impact of interface design element features on task performance in older adults: evidence from eye-tracking and EEG signals. International Journal of Environmental Research and Public Health, 19 (15): 9251. ISSN 1661-7827

ZHOU, C., DAI, Y., HUANG, T., ZHAO, H. and KANER, J., 2022. An empirical study on the influence of smart home interface design on the interaction performance of the elderly. International Journal of Environmental Research and Public Health, 19 (15), p. 9105. ISSN 1661-7827

KANER, J., 2022. Life cycle analysis for reconstituted decorative lumber from an ecological perspective: a review. BioResources, 17 (3).

ZHOU, C., LI, Z., KANER, J. and LENG, C., 2022. Development of a selection system for the colour of wardrobe furniture. BioResources, 17 (3), pp. 3912-3928. ISSN 1930-2126

JUNAIDY, D.W., GEORGIEV, G.V., KANER, J. and ALFIN, E., 2020. Identifying interior spatial dimensions according to user preference: an associative concept network analysis. Jurnal Sosioteknologi, 19 (3), pp. 309-326. ISSN 1858-3474

KANER, J., 2020. KEF, TEF, REF and all that: the current state of art & design higher education in the UK. Design and Technology Education: An International Journal, 25 (1), pp. 9-12. ISSN 1360-1431

KANER, J., ABOUALI, L. and NI, J., 2019. A study of the interior furniture and decorative motifs of Acheamenid and Sassanid. American Journal of Art and Design, 4 (4), pp. 48-57. ISSN 2578-7799

ABOUALI, L., WU, Z. and KANER, J., 2018. Chinese visual traditions encountered on Safavid furniture. Bulletin of the Transilvania University of Brasov. Series II: Forestry, Wood Industry, Agricultural Food Engineering, 11 (2), pp. 81-94. ISSN 2065-2135

KANER, J., IORAS, F. and RATNASINGAM, J., 2017. Performance and stability of historic casein formaldehyde. e-plastory: Journal of Plastics History. ISSN 2190-9598

ZHOU, C., KANER, J., WU, Z., IORAS, F. and LIANG, S., 2016. A study on three dimensional scanning and mapping and implementation key technology of wenge bench parts. International Journal of Simulation: Systems, Science & Technology, 17 (25), 14.1-14.9. ISSN 1473-804X

JUNAIDY, D.W., KANER, J., IORAS, F. and NAGAI, Y., 2015. Capturing characteristics of the conceptual ideation process of master crafts persons to inform design education: a comparative study of rural craft practitioners in Indonesia and in the UK. Journal of Design Research, 13 (4), pp. 395-423. ISSN 1748-3050

ZHOU, C., KANER, J., IORAS, F. and WU, Z., 2015. Study on group technology efficiency gains for solid wood seating furniture. Bulletin of the Transilvania University of Brașov. Series II: Forestry, Wood Industry, Agricultural Food Engineering, 8 (1), pp. 31-42. ISSN 2065-2143

Chapter in book

HUGHES-RILEY, T., DIAS, T., KANER, J. and RAHEMTULLA, Z., 2021. Using an inertial motion unit to find the optimal location to continuously monitor for near falls. In: Sheldon 3rd Online Conference Meeting: Solutions for ageing well at home, in the community and at work. Proceedings book. Sheld-on Publications, pp. 135-142.

TONKIN, L., TOWNSEND, K., KANER, J. and DOWNES, D., 2021. Pre-empting loss through ‘fashion memory’: a ‘postconservation’ perspective. In: M. ERNST and M. GASPAR, eds., Proceedings of the DHS Annual Conference 2021 "Memory full? Reimagining the relations between design and history". FHNW Academy Of Art And Design.

KANER, J., 2017. Image management systems: a model for archiving Stoke-on-Trent's post-industrial heritage. In: N. BROWNSWORD and A.H. MYDLAND, eds., Topographies of the obsolete: Ashmolean papers. Stoke-on-Trent: Topographies of the Obsolete Publications, pp. 56-69. ISBN 9788269093742

IORAS, F., KANER, J., BANDARA, I. and RATNASINGAM, J., 2015. University–industry cooperation for supporting sector restructure: wood industry case study. In: L. GÓMEZ CHOVA, A. LÓPEZ MARTÍNEZ and I. CANDEL TORRES, eds., EduLearn 15 proceedings: 7th International Conference on Education and New Learning Technologies, Barcelona, Spain, 6th-8th of July, 2015. Valencia: IATED Academy, pp. 1325-1330. ISBN 9788460682431

Conference contribution

IORAS, F., KANER, J., ARRAIZ, M. and ABRUDAN, V., 2014. Comparative study on teaching methods for environmental courses. In: ICERI 2014: 7th International Conference of Education, Research and Innovation, Seville, Spain, 17-19 November 2014.

Edited book

KANER, J., LAMESKI, P., TOMSONE, S., BURNARD, M. and METERO, F., 2018. First sheld-on conference meeting. Proceedings of the first COST Action CA16226 Conference Meeting Riga, Latvia, 10 October 2018. Riga: Rīga Stradiņš University.

KANER, J. and IORAS, F., 2014. Current issues in global furniture: proceedings of the 8th Biennial Furniture Research Group Conference, Missenden Abbey Buckinghamshire New University, 20 November 2013. Great Missenden: Buckinghamshire New University. ISBN 9780948314667

This list was generated on Mon Oct 2 23:36:26 2023 UTC.