Items where Author is "Ianakiev, A"

WIDL, E., CRONBACH, D., SORKNÆS, P., FITÓ, J., MUSCHICK, D., REPETTO, M., RAMOUSSE, J. and IANAKIEV, A., 2022. Expert survey and classification of tools for modeling and simulating hybrid energy networks. Sustainable Energy, Grids and Networks, 32: 100913. ISSN 2352-4677

NAIK, K. and IANAKIEV, A., 2021. Heat demand prediction: a real-life data model vs simulated data model comparison. Energy Reports, 7 (supp 4), pp. 380-388. ISSN 2352-4847

CHARLESWORTH, R., NAIK, K., CHARLESWORTH, T., O'DWYER, E., IANAKIEV, A., JOHNSON, J., BOUKHANOUF, R., GILLOTT, M., SELLWOOD, V. and ALOOR, J., 2021. A multi-energy system optimisation software for advance process control using hypernetworks and a micro-service architecture. Energy Reports, 7 (supp 4), pp. 167-175. ISSN 2352-4847

IANAKIEV, A., 2020. Decarbonising heat in residential homes. Nottingham: Nottingham Trent University.

CUCCA, G. and IANAKIEV, A., 2020. Assessment and optimisation of energy consumption in building communities using an innovative co-simulation tool. Journal of Building Engineering: 101681. ISSN 2352-7102

IANAKIEV, A., 2020. Retrofit social housing report - better homes improve lives. Nottingham: Nottingham Trent University.

IANAKIEV, A., GALADANCI, A.S., KROMANIS, R. and ROBINSON, J., 2020. Energy Investigation Framework: understanding buildings from an energy perspective view. Journal of Building Engineering, 28: 101046. ISSN 2352-7102

NANDASIRI, G.K., IANAKIEV, A. and DIAS, T., 2020. Hyperelastic properties of platinum cured silicones and its applications in active compression. Polymers, 12 (1): 148. ISSN 2073-4360

ASHFAQ, A. and IANAKIEV, A., 2018. Investigation of hydraulic imbalance for converting existing boiler based buildings to low temperature district heating. Energy, 160, pp. 200-212. ISSN 0360-5442

ASHFAQ, A. and IANAKIEV, A., 2018. Features of fully integrated renewable energy atlas for Pakistan; wind, solar and cooling. Renewable and Sustainable Energy Reviews, 97, pp. 14-27. ISSN 1364-0321

ASHFAQ, A. and IANAKIEV, A., 2018. Cost-minimised design of a highly renewable heating network for fossil-free future. Energy, 152, pp. 613-626. ISSN 0360-5442

AL-AMEEN, Y., IANAKIEV, A. and EVANS, R., 2018. Recycling construction and industrial landfill waste material for backfill in horizontal ground heat exchanger systems. Energy, 151, pp. 556-568. ISSN 0360-5442

COULTER, F.B., COULTER, B.S., MARKS, J.R. and IANAKIEV, A., 2018. Production techniques for 3D printed inflatable elastomer structures: Part I — Fabricating air-permeable forms and coating with inflatable silicone membranes via spray deposition. 3D Printing and Additive Manufacturing, 5 (1), pp. 5-16. ISSN 2329-7662

TUNZI, M., BOUKHANOUF, R., LI, H., SVENDSEN, S. and IANAKIEV, A., 2017. Improving thermal performance of an existing UK district heat network: a case for temperature optimization. Energy and Buildings. ISSN 0378-7788

DI MARIA, V., D’ANDRIA, L., MUCIACCIA, G. and IANAKIEV, A., 2017. Influence of elevated temperature on glued-in steel rods for timber elements. Construction and Building Materials, 147, pp. 457-465. ISSN 0950-0618

AL-AMEEN, Y., IANAKIEV, A. and EVANS, R., 2017. Thermal performance of a solar assisted horizontal ground heat exchanger. Energy. ISSN 0360-5442

CUI, J.M., IANAKIEV, A. and GARCÍA-FUENTES, M., 2017. To examine appropriate deep-retrofit practice using simulation results in an EU-funded urban regeneration project. Energy Procedia, 105, pp. 2549-2556. ISSN 1876-6102

GENT, D. and IANAKIEV, A., 2017. Assessing riveted connections to Eurocode 3. Proceedings of the Institution of Civil Engineers - Engineering History and Heritage, 170 (2), pp. 87-92. ISSN 1757-9430

IANAKIEV, A., CUI, J.M., GARBETT, S. and FILER, A., 2017. Innovative system for delivery of low temperature district heating. International Journal of Sustainable Energy Planning and Management, 12, pp. 19-28. ISSN 2246-2929

COULTER, F.B. and IANAKIEV, A., 2015. 4D printing inflatable silicone structures. 3D Printing and Additive Manufacturing, 2 (3), pp. 140-144. ISSN 2329-7662

DI MARIA, V. and IANAKIEV, A., 2015. Adhesive connections in timber: a comparison between rough and smooth wood bonding surfaces. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (3), pp. 395-401.

SARSHAR DRISCOLL, M., IANAKIEV, A. and SERTYESILISIK, B., 2015. Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical University; [and] Low Carbon Buildings and Communities in the Sustainable Built Environment, 23-25 February 2015, Istanbul Technical University. Nottingham: Nottingham Trent University: CADBE. ISBN 9780992887803

SARSHAR DRISCOLL, M., IANAKIEV, A. and SERTYESILISIK, B., 2015. Preface. In: M. SARSHAR DRISCOLL, A. IANAKIEV and B. SERTYESILISIK, eds., Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical Uni. Nottingham: Nottingham Trent University: CADBE, i. ISBN 9780992887803

IANAKIEV, A. and GREENWOOD, J., 2013. Design and analysis of rotomoulded panels for a self-erecting low-cost flood barrier. Architectural Engineering and Design Management, 9 (2), pp. 110-120. ISSN 1745-2007

RADLOV, K., PANOV, V. and IANAKIEV, A., 2012. Accident scenaria and seismic stability of polar crane operating at a nuclear power plant. International Journal of Design Engineering, 5 (1), pp. 41-64. ISSN 1751-5874

IANAKIEV, A. and DARKWA, J., 2012. Fast algorithm for modelling fluid flow and heat transfer in rotomoulding. International Journal of Design Engineering, 5 (2), pp. 142-157. ISSN 1751-5874

IANAKIEV, A., 2008. Design features aimed at reducing stresses and deformations in plastic water tanks [invited paper]. In: International Rotational Moulding Conference ARMO 08, Belfast, 2008, Belfast.

IANAKIEV, A., 2008. Modelling of complex structures using superelements. International Journal of Design Engineering, 1 (4), pp. 396-411. ISSN 1751-5874

IANAKIEV, A., 2007. Analysis of rotational moulding process parameters and warpage on cycle times. In: ANTEC 2007 Annual Technical Conference, Cincinnati, Ohio, USA, 6-10 May, 2007, Cincinnati, Ohio, USA.

IANAKIEV, A. and LIM, K.K., 2007. Analysis of rotational moulding process parameters and warpage on cycle times'. Plastics, Rubber and Composites, 36 (10), pp. 455-462. ISSN 1743-2898

IANAKIEV, A. and LIM, K.K., 2007. Modelling of rotational moulding process: analysis of process parameters and warpage on cycle times. Plastics, Rubber and Composites, 36 (10), pp. 455-462. ISSN 1465-8011

IANAKIEV, A. and LIM, K.K., 2007. Modelling of rotational moulding process: analysis of process parameters and warpage on cycle times. Plastics, Rubber and Composites, 36 (10), pp. 455-462. ISSN 1465-8011

IANAKIEV, A., 2006. Investigation into the effects of using fins and internal cooling in rotomoulding. In: 2006 International ANSYS Conference, Southpointe 275 Technology Drive, Pittsburgh, PA, USA, 2006, Pittsburgh, PA, USA.

DARKWA, K., IANAKIEV, A. and O'CALLAGHAN, P.W., 2006. Modelling and simulation of adsorption process in a fluidised bed thermochemical energy reactor. Journal of Applied Thermal Engineering, 26, pp. 838-845. ISSN 1359-4311

LIM, K.K. and IANAKIEV, A., 2006. Modelling of rotational moulding process: multi-layer slip-flow model, phase-change, and warpage. International Journal of Polymer Engineering Science, 46, pp. 960-963.

IANAKIEV, A., 2006. A fast algorithm for modelling a coupled fluid flow and heat transfer in rotomoulding. In: 5th International Conference on Mechanics and Materials in Design, Porto, Portugal, 24-26 July, 2006, Porto, Portugal.

LIM, K.K. and IANAKIEV, A., 2004. Numerical studies on phase change algorithm and warpage/non-warpage problem under various process conditions of rotational moulding. In: ANTEC 2004, Chicago, Ill., USA, May 2004, Chicago, Il, USA.

LIM, K.K. and IANAKIEV, A., 2004. Two-dimensional slip-flow model of rotational moulding. In: ANTEC 2004, Chicago, Ill., USA, May 2004, Chicago, Ill., USA.

LIM, K.K., IANAKIEV, A. and HULL, J.B., 2003. Numerical modelling for rotational moulding with non-isothermal heating. Plastics, Rubber and Composites, 32 (10), pp. 421-430. ISSN 1465-8011

LIM, K.K., IANAKIEV, A. and HULL, J.B., 2003. Numerical modelling for rotational moulding with non-isothermal heating. Plastics, Rubber and Composites, 32 (10), pp. 421-430. ISSN 1465-8011

LIM, K.K., IANAKIEV, A. and HULL, J.B., 2003. Predictions of heating cycle for rotational moulding with non-isothermal heating. In: LUXFEM Conference (1st International Conference on Finite Element Application), Luxemburg, 2003, Luxemburg.

SPENCER, M., KERNS, M. and IANAKIEV, A., 2002. Intelligent process control. In: ARM Fall Meeting, Toronto, Canada, October, 2002, Toronto, Canada.

SPENCER, M., KERNS, M. and IANAKIEV, A., 2002. Rotational moulding intelligent process control. In: Pan-European Rotational Moulding Conference, Paris, France, May, 2002, Paris, France.