Items where Author is "Ianakiev, A"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 28.

Journal article

DI MARIA, V., D’ANDRIA, L., MUCIACCIA, G. and IANAKIEV, A., 2017. Influence of elevated temperature on glued-in steel rods for timber elements. Construction and Building Materials, 147, pp. 457-465. ISSN 0950-0618

AL-AMEEN, Y., IANAKIEV, A. and EVANS, R., 2017. Thermal performance of a solar assisted horizontal ground heat exchanger. Energy. ISSN 0360-5442

CUI, J.M., IANAKIEV, A. and GARCÍA-FUENTES, M., 2017. To examine appropriate deep-retrofit practice using simulation results in an EU-funded urban regeneration project. Energy Procedia, 105, pp. 2549-2556. ISSN 1876-6102

GENT, D. and IANAKIEV, A., 2017. Assessing riveted connections to Eurocode 3. Proceedings of the Institution of Civil Engineers - Engineering History and Heritage, 170 (2), pp. 87-92. ISSN 1757-9430

IANAKIEV, A., CUI, J.M., GARBETT, S. and FILER, A., 2017. Innovative system for delivery of low temperature district heating. International Journal of Sustainable Energy Planning and Management, 12, pp. 19-28. ISSN 2246-2929

DI MARIA, V. and IANAKIEV, A., 2015. Adhesive connections in timber: a comparison between rough and smooth wood bonding surfaces. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (3), pp. 395-401.

IANAKIEV, A. and GREENWOOD, J., 2013. Design and analysis of rotomoulded panels for a self-erecting low-cost flood barrier. Architectural Engineering and Design Management, 9 (2), pp. 110-120. ISSN 1745-2007

RADLOV, K., PANOV, V. and IANAKIEV, A., 2012. Accident scenaria and seismic stability of polar crane operating at a nuclear power plant. International Journal of Design Engineering, 5 (1), pp. 41-64. ISSN 1751-5874

IANAKIEV, A. and DARKWA, J., 2012. Fast algorithm for modelling fluid flow and heat transfer in rotomoulding. International Journal of Design Engineering, 5 (2), pp. 142-157. ISSN 1751-5874

IANAKIEV, A., 2008. Modelling of complex structures using superelements. International Journal of Design Engineering, 1 (4), pp. 396-411. ISSN 1751-5874

IANAKIEV, A. and LIM, K.K., 2007. Analysis of rotational moulding process parameters and warpage on cycle times'. Plastics, Rubber and Composites, 36 (10), pp. 455-462. ISSN 1743-2898

IANAKIEV, A. and LIM, K.K., 2007. Modelling of rotational moulding process: analysis of process parameters and warpage on cycle times. Plastics, Rubber and Composites, 36 (10), pp. 455-462. ISSN 1465-8011

IANAKIEV, A. and LIM, K.K., 2007. Modelling of rotational moulding process: analysis of process parameters and warpage on cycle times. Plastics, Rubber and Composites, 36 (10), pp. 455-462. ISSN 1465-8011

DARKWA, K., IANAKIEV, A. and O'CALLAGHAN, P.W., 2006. Modelling and simulation of adsorption process in a fluidised bed thermochemical energy reactor. Journal of Applied Thermal Engineering, 26, pp. 838-845. ISSN 1359-4311

LIM, K.K. and IANAKIEV, A., 2006. Modelling of rotational moulding process: multi-layer slip-flow model, phase-change, and warpage. International Journal of Polymer Engineering Science, 46, pp. 960-963.

LIM, K.K., IANAKIEV, A. and HULL, J.B., 2003. Numerical modelling for rotational moulding with non-isothermal heating. Plastics, Rubber and Composites, 32 (10), pp. 421-430. ISSN 1465-8011

LIM, K.K., IANAKIEV, A. and HULL, J.B., 2003. Numerical modelling for rotational moulding with non-isothermal heating. Plastics, Rubber and Composites, 32 (10), pp. 421-430. ISSN 1465-8011

Book contribution

SARSHAR DRISCOLL, M., IANAKIEV, A. and SERTYESILISIK, B., 2015. Preface. In: M. SARSHAR DRISCOLL, A. IANAKIEV and B. SERTYESILISIK, eds., Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical Uni. Nottingham: Nottingham Trent University: CADBE, i. ISBN 9780992887803

Conference contribution

IANAKIEV, A., 2008. Design features aimed at reducing stresses and deformations in plastic water tanks [invited paper]. In: International Rotational Moulding Conference ARMO 08, Belfast, 2008, Belfast.

IANAKIEV, A., 2007. Analysis of rotational moulding process parameters and warpage on cycle times. In: ANTEC 2007 Annual Technical Conference, Cincinnati, Ohio, USA, 6-10 May, 2007, Cincinnati, Ohio, USA.

IANAKIEV, A., 2006. Investigation into the effects of using fins and internal cooling in rotomoulding. In: 2006 International ANSYS Conference, Southpointe 275 Technology Drive, Pittsburgh, PA, USA, 2006, Pittsburgh, PA, USA.

IANAKIEV, A., 2006. A fast algorithm for modelling a coupled fluid flow and heat transfer in rotomoulding. In: 5th International Conference on Mechanics and Materials in Design, Porto, Portugal, 24-26 July, 2006, Porto, Portugal.

LIM, K.K. and IANAKIEV, A., 2004. Numerical studies on phase change algorithm and warpage/non-warpage problem under various process conditions of rotational moulding. In: ANTEC 2004, Chicago, Ill., USA, May 2004, Chicago, Il, USA.

LIM, K.K. and IANAKIEV, A., 2004. Two-dimensional slip-flow model of rotational moulding. In: ANTEC 2004, Chicago, Ill., USA, May 2004, Chicago, Ill., USA.

LIM, K.K., IANAKIEV, A. and HULL, J.B., 2003. Predictions of heating cycle for rotational moulding with non-isothermal heating. In: LUXFEM Conference (1st International Conference on Finite Element Application), Luxemburg, 2003, Luxemburg.

SPENCER, M., KERNS, M. and IANAKIEV, A., 2002. Intelligent process control. In: ARM Fall Meeting, Toronto, Canada, October, 2002, Toronto, Canada.

SPENCER, M., KERNS, M. and IANAKIEV, A., 2002. Rotational moulding intelligent process control. In: Pan-European Rotational Moulding Conference, Paris, France, May, 2002, Paris, France.

Edited book

SARSHAR DRISCOLL, M., IANAKIEV, A. and SERTYESILISIK, B., 2015. Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical University; [and] Low Carbon Buildings and Communities in the Sustainable Built Environment, 23-25 February 2015, Istanbul Technical University. Nottingham: Nottingham Trent University: CADBE. ISBN 9780992887803

This list was generated on Mon Nov 20 06:06:06 2017 UTC.