Items where Author is "Zhang, B"

Journal article

ZHANG, B., BELTON, P.S., TEOH, X.-Y., GLEADALL, A., BIBB, R.J. and QI, S., 2023. An investigation into the effects of ink formulations of semi-solid syringe extrusion 3D printing on the performance of the printed solid dosage forms. Journal of Materials Chemistry B. ISSN 2050-750X

LU, A.T., FEI, Z., HAGHANI, A., ROBECK, T.R., ZOLLER, J.A., LI, C.Z., LOWE, R., YAN, Q., ZHANG, J., VU, H., ABLAEVA, J., ACOSTA-RODRIGUEZ, V.A., ADAMS, D.M., ALMUNIA, J., ALOYSIUS, A., ARDEHALI, R., ARNESON, A., BAKER, C.S., BANKS, G., BELOV, K., BENNETT, N.C., BLACK, P., BLUMSTEIN, D.T., BORS, E.K., BREEZE, C.E., BROOKE, R.T., BROWN, J.L., CARTER, G.G., CAULTON, A., CAVIN, J.M., CHAKRABARTI, L., CHATZISTAMOU, I., CHEN, H., CHENG, K., CHIAVELLINI, P., CHOI, O.W., CLARKE, S.M., COOPER, L.N., COSSETTE, M.L., DAY, J., DEYOUNG, J., DIROCCO, S., DOLD, C., EHMKE, E.E., EMMONS, C.K., EMMRICH, S., ERBAY, E., ERLACHER-REID, C., FAULKES, C.G., FERGUSON, S.H., FINNO, C.J., FLOWER, J.E., GAILLARD, J.M., GARDE, E., GERBER, L., GLADYSHEV, V.N., GORBUNOVA, V., GOYA, R.G., GRANT, M.J., GREEN, C.B., HALES, E.N., HANSON, M.B., HART, D.W., HAULENA, M., HERRICK, K., HOGAN, A.N., HOGG, C.J., HORE, T.A., HUANG, T., IZPISUA BELMONTE, J.C., JASINSKA, A.J., JONES, G., JOURDAIN, E., KASHPUR, O., KATCHER, H., KATSUMATA, E., KAZA, V., KIARIS, H., KOBOR, M.S., KORDOWITZKI, P., KOSKI, W.R., KRÜTZEN, M., KWON, S.B., LARISON, B., LEE, S.G., LEHMANN, M., LEMAITRE, J.F., LEVINE, A.J., LI, C., LI, X., LIM, A.R., LIN, D.T.S., LINDEMANN, D.M., LITTLE, T.J., MACORETTA, N., MADDOX, D., MATKIN, C.O., MATTISON, J.A., MCCLURE, M., MERGL, J., MEUDT, J.J., MONTANO, G.A., MOZHUI, K., MUNSHI-SOUTH, J., NADERI, A., NAGY, M., NARAYAN, P., NATHANIELSZ, P.W., NGUYEN, N.B., NIEHRS, C., O’BRIEN, J.K., O’TIERNEY GINN, P., ODOM, D.T., OPHIR, A.G., OSBORN, S., OSTRANDER, E.A., PARSONS, K.M., PAUL, K.C., PELLEGRINI, M., PETERS, K.J., PEDERSEN, A.B., PETERSEN, J.L., PIETERSEN, D.W., PINHO, G.M., PLASSAIS, J., POGANIK, J.R., PRADO, N.A., REDDY, P., REY, B., RITZ, B.R., ROBBINS, J., RODRIGUEZ, M., RUSSELL, J., RYDKINA, E., SAILER, L.L., SALMON, A.B., SANGHAVI, A., SCHACHTSCHNEIDER, K.M., SCHMITT, D., SCHMITT, T., SCHOMACHER, L., SCHOOK, L.B., SEARS, K.E., SEIFERT, A.W., SELUANOV, A., SHAFER, A.B.A., SHANMUGANAYAGAM, D., SHINDYAPINA, A.V., SIMMONS, M., SINGH, K., SINHA, I., SLONE, J., SNELL, R.G., SOLTANMAOHAMMADI, E., SPANGLER, M.L., SPRIGGS, M.C., STAGGS, L., STEDMAN, N., STEINMAN, K.J., STEWART, D.T., SUGRUE, V.J., SZLADOVITS, B., TAKAHASHI, J.S., TAKASUGI, M., TEELING, E.C., THOMPSON, M.J., VAN BONN, B., VERNES, S.C., VILLAR, D., VINTERS, H.V., WALLINGFORD, M.C., WANG, N., WAYNE, R.K., WILKINSON, G.S., WILLIAMS, C.K., WILLIAMS, R.W., YANG, X.W., YAO, M., YOUNG, B.G., ZHANG, B., ZHANG, Z., ZHAO, P., ZHAO, Y., ZHOU, W., ZIMMERMANN, J., ERNST, J., RAJ, K. and HORVATH, S., 2023. Universal DNA methylation age across mammalian tissues. Nature Aging. ISSN 2662-8465

ZHANG, B., NASEREDDIN, J., MCDONAGH, T., VON ZEPPELIN, D., GLEADALL, A., ALQAHTANI, F., BIBB, R., BELTON, P. and QI, S., 2023. Effects of porosity on drug release kinetics of swellable and erodible porous pharmaceutical solid dosage forms fabricated by hot melt droplet deposition 3D printing. International Journal of Pharmaceutics, 604: 120626. ISSN 0378-5173

ZHANG, B., TEOH, X.Y., YAN, J., GLEADALL, A., BELTON, P., BIBB, R. and QI, S., 2022. Development of combi-pills using the coupling of semi-solid syringe extrusion 3D printing with fused deposition modelling. International Journal of Pharmaceutics, 625: 122140. ISSN 0378-5173

ZHU, Y., SUN, F., CHOW, G.C.C., TAO, S., COOPER, S.B., ZHANG, B. and WONG, T.W.L., 2022. Associations of device-measured physical activity, sedentary behavior, and executive function in preadolescents: a latent profile approach. Pediatric Exercise Science. ISSN 0899-8493

ZHANG, B., GLEADALL, A., BELTON, P., MCDONAGH, T., BIBB, R. and QI, S., 2021. New insights into the effects of porosity, pore length, pore shape and pore alignment on drug release from extrusionbased additive manufactured pharmaceuticals. Additive Manufacturing, 46: 102196. ISSN 2214-7810

ZHANG, B., SERJOUEI, A., ZHANG, Y.-F., WU, J., LI, H., WANG, D., YEE LOW, H. and GE, Q., 2021. Dual-stage thermosetting photopolymers for advanced manufacturing. Chemical Engineering Journal, 411: 128466. ISSN 1385-8947

HINGORANI, H., ZHANG, Y.-F., ZHANG, B., SERJOUEI, A. and GE, Q., 2019. Modified commercial UV curable elastomers for passive 4D printing. International Journal of Smart and Nano Materials. ISSN 1947-5411

ZHANG, B., KOWSARI, K., SERJOUEI, A., DUNN, M.L. and GE, Q., 2018. Reprocessable thermosets for sustainable three-dimensional printing. Nature Communications, 9: 1831. ISSN 2041-1723

ZHANG, B., LI, S., HINGORANI, H., SERJOUEI, A., LARUSH, L., PAWAR, A.A., GOH, W.H., SAKHAEI, A.H., HASHIMOTO, M., KOWSARI, K., MAGDASSI, S. and GE, Q., 2018. Highly stretchable hydrogels for UV curing based high-resolution multimaterial 3D printing. Journal of Materials Chemistry B, 6 (20), pp. 3246-3253. ISSN 2050-750X

MARTIN, L., MORRITT, A.L., LOPEZ, J.R., NAKAZAWA, Y., AKUTSU, H., IMAJO, S., IHARA, Y., ZHANG, B., ZHANG, Y. and GUO, Y., 2017. Molecular conductors from bis(ethylenedithio)tetrathiafulvalene with tris(oxalato)rhodate. Dalton Transactions, 46 (29), pp. 9542-9548. ISSN 1477-9226