Items where Author is "Darkwa, K"

Journal article

DARKWA, K., 2007. Quasi-isotropic laminated phase change material system. Applied Energy Journal, 84, pp. 599-607.

DARKWA, K., IANAKIEV, A. and O'CALLAGHAN, P.W., 2006. Modelling and simulation of adsorption process in a fluidised bed thermochemical energy reactor. Journal of Applied Thermal Engineering, 26, pp. 838-845. ISSN 1359-4311

DARKWA, K. and O'CALLAGHAN, P.W., 2006. Phase change drywalls in a passive solar building. Applied Energy, 83 (5), pp. 413-536.

DARKWA, K. and O'CALLAGHAN, P.W., 2006. Simulation of phase change drywalls in a passive solar building. Applied Thermal Engineering, 26, pp. 853-858. ISSN 1359-4311

DARKWA, K. and KIM, J.S., 2005. Dynamics of energy storage in phase change drywall systems. International Journal of Energy Research, 29 (4), pp. 335-343. ISSN 0363-907X

DARKWA, K. and KIM, J.S., 2005. Thermal analysis of composite phase change drywall systems. Journal of Solar Energy Engineering-Transactions of the Asme, 127 (3), pp. 352-356. ISSN 0199-6231

DARKWA, K. and KIM, J.S., 2004. Heat transfer in neuron composite laminated phase-change drywall. Proceedings of the Institution of Mechanical Engineers Part A-Journal of Power and Energy, 218 (2), pp. 83-88. ISSN 0957-6509

KIM, J.S. and DARKWA, K., 2003. Simulation of an integrated PCM-wallboard system. International Journal of Energy Research, 27 (3), pp. 215-223. ISSN 0363-907X

KIM, J. and DARKWA, K., 2003. Simulation of integrated PCM-wallboard system. International Journal of Energy Research, 27 (3), pp. 215-223.

DARKWA, K., 2000. Evaluation of regenerative phase change drywalls: low energy buildings application. International Journal of Energy Research, 23 (99), pp. 1205-1212.

DARKWA, K., 2000. Mathematical evaluation of phase change wall systems for reducing energy consumption in buildings and CO2 emissions in the UK. Journal of Architectural Science Review, 43 (4), pp. 221-228.

DARKWA, K., 2000. Thermochemical energy storage in inorganic oxides: an experimental evaluation. Journal of Applied Thermal Engineering, 18 (6), pp. 387-400.

DARKWA, K., 1999. Thermal energy storage in the transport sector. Journal of Energy World, 209, pp. 15-17.

DARKWA, K., 1997. Experimental studies of a thermochemical energy store for automobile application. Proceedings of the I MECH E Part D: Journal of Automobile Engineering, 211, pp. 347-360. ISSN 0954-4070

DARKWA, K. and O'CALLAGHAN, P.W., 1997. Green transport technology (GTT): analytical studies of a thermochemical store for minimising energy consumption and air pollution from automobile engines. Journal of Applied Thermal Engineering, 17, pp. 603-614.

DARKWA, K. and O'CALLAGHAN, P.W., 1997. Mathematical modelling of a thermochemical energy store: automobile application. Proceedings of the I MECH E Part D: Journal of Automobile Engineering, 211, pp. 337-346. ISSN 0954-4070

DARKWA, K. and O'CALLAGHAN, P.W., 1996. Energy usage and environmental pollution in the UK: which sector dominates? Journal of Power and Energy, 210, pp. 3-14.

DARKWA, K. and O'CALLAGHAN, P.W., 1995. Energy UK 2011? Give us just a little more time. Journal of Energy World, 227, pp. 11-12.

Authored book

YEBOAH, S.K. and DARKWA, K., 2008. Review of the sustainable energy resource potential of Ghana. UNSPECIFIED.

Chapter in book

DARKWA, K., 2006. Agitated fluidised bed thermochemical energy storage for industrial waste heat recovery system. In: Proceedings of the 1st International Energy 2030 Conference. UNSPECIFIED. ISBN 9948032837

DARKWA, K., 2001. Evaluation of an encapsulated neuron-composite phase change material (PCM) for drywall system. In: Proceedings of the 36th Intersociety energy conversion engineering conference. American Society of Mechanical Engineers, pp. 1177-1180. ISBN 079181937X

Conference contribution

YEBOAH, S.K. and DARKWA, K., 2007. Review of Ghana's strategic energy plan for 2006 - 2020. In: Integrator Doctoral Conference; a Technology and Management Conference, University of Nottingham, 2007.

DARKWA, K., 2006. Investigation into thermal performance of buildings in the UK using infrared thermography. In: Proceedings of the 4th International Energy Conversion Engineering Conference, San Diego, USA.

AL-HABAIBEH, A., REDGATE, J. and DARKWA, K., 2006. Investigation into thermal performance of buildings in the UK using infrared thermography - a case study. In: 4th International Energy Conversion Engineering Conference, California, 26-29 June 2006, California.

DARKWA, K., 2006. Mathematical modelling of a composite quasi-isotropic laminated PCM (phase change material). In: Proceedings of the 4th International Energy Conversion Engineering Conference, San Diego, USA.

REDGATE, J., AL-HABAIBEH, A. and DARKWA, K., 2006. Optimum efficiency induction motor drives for the electric vehicle application. In: 4th International Energy Conversion Engineering Conference, California, 26-29 June 2006, California.

DARKWA, K., 2005. Evaluation of non-grid AC/DC combined heat and power (CHP) system for small and medium enterprises (SMEs) sector. In: 2nd World Conference and Exhibition on Biomass for Energy, Industry and Climate Protection, Rome, Italy, May 2004, Rome, Italy.

DARKWA, K., 2005. Mathematical modelling and simulation of phase change drywalls for heating application in a passive solar building. In: Proceedings of the 3rd International Energy Conversion Engineering Conference, San Francisco, USA.

DARKWA, K., 2005. Modelling of an agitated fluidised bed thermochemical energy storage system. In: Proceedings of the 2nd International Energy Conversion Engineering Conference, Providence, USA.

DARKWA, K., 2004. Evaluation of fluidized bed thermochemical energy reactor. In: International Conference on Heat Powered Cycles, Larnaca, Cyprus, October 2004, Larnaca, Cyprus.

DARKWA, K., 2004. Novel development of a thermochemical energy reactor for the transport sector. In: A collection of technical papers: 2nd International Energy Conversion Engineering Conference, Providence, Rhode Island, 16-19 August 2004 [American Institute of Aeronautics and Astronautics], Providence, Rhode Island.

DARKWA, K., 2004. Novel development of fluidised bed thermochemical energy reactor. In: Workshop of Annex 17, International Energy Agency (IEA)- Advance Thermal Energy Storage through Phase Change Materials and Chemical Reactions, University of Beijing, Tsinghua, China, October 2004, University of Beijing, Tsinghua, China.

DARKWA, K., 2003. Development of phase change drywall systems. In: Conference on Technological Developments in the Built Environment, BRE, Garston, Watford, UK, 23 September 2003, BRE, Garston, Watford.

DARKWA, K., 2003. Thermal assessment of integrated phase change drywall systems. In: Proceedings of the 1st International Energy Conversion Engineering Conference, Portsmouth, USA.

DARKWA, K. and KIM, J.S., 2002. Enhanced performance of laminated PCM wallboard for thermal energy storage in buildings. In: Proceedings of the 37th Intersociety Energy Conversion Engineering Conference, Washington, USA.

DARKWA, K. and O'CALLAGHAN, P.W., 2001. Energy management strategy for a sustainable energy economy. In: International Conference on Sustainable Economic Development and Sound Resource Management in Central Asia, Uzbekistan, 3 October 2001, Uzbekistan.

DARKWA, K., 2001. Experimental evaluation of low energy liquid-based dehumidifier. In: Renewable Energy Symposium, Institute of Sustainable Development in Business, Nottingham Trent University, Nottingham, February 2001, Nottingham, UK.

DARKWA, K., 2001. Multimedia-based energy management tool for manufacturing system. In: Symposium on intelligent systems for advanced manufacturing, Newton, Massachusetts, USA, 28-31 October 2001, Newton, Mass..

IDAN, C.K., YUSUF, Y.Y. and DARKWA, K., 2001. Quality function deployment - past, present and future directions. In: 16th International Conference on Production Research ICPR-16, Prague, Czech Republic, 29 July - 3 August 2001, Prague, Czech Republic.

IDAN, C.K., YUSUF, Y.Y. and DARKWA, K., 2001. A framework for the application of QFD in construction. In: 16th International Conference on Production Research ICPR-16, Prague, Czech Republic, 29 July - 3 August 2001, Prague, Czech Republic.

DARKWA, K., 2000. Development of pressurised hot water powered engine. In: Applied Energy Research Forum, Joint Seminar, Power 2000 and Nottingham Trent University.

DARKWA, K., 2000. Effects of melting temperature and phase change zone of PCM in heating application. In: Workshop of Annexe 10, International Energy Agency (IEA), June 2000, Stockholm, Sweden, Stockholm, Sweden.

DARKWA, K., 2000. Modelling of an internal combustion engine-powered desiccant cooling system. In: 32nd International Symposium on Automotive Technology and Automation (ISATA), June 2000, Vienna, Austria, Vienna, Austria.

DARKWA, K., 1999. Biomass energy application in a developed economy. In: Cranfield University Research Forum, March 1999, Cranfield University, Bedfordshire.

DARKWA, K., 1998. Desiccant cooling and dehumidification for the built environment. In: Renewable Energy Symposium, Institute of Sustainable Development in Business, Nottingham Trent University, July 1998.

DARKWA, K., 1998. Minimisation of pollutants and energy consumption in the road transport sector. In: Preceding, East Midlands Region Environmental Conference, UK, 1998.

DARKWA, K., 1996. Road transport and pollution control. In: 29th International Symposium on Automotive Technology and Automation (ISATA), 1996, Florence, Italy, Florence, Italy.

DARKWA, K., 1995. Integrated environmental-energy technology for the road transport sector. In: Preceding, East Midlands Region Conference, UK, 1995.

DARKWA, K., 1995. Minimisation of pollutants and energy consumption in the road transport sector. In: Preceding, East Midlands Region Environmental Conference, UK, 1995.

DARKWA, K., 1993. Thermal energy storage in the building sector. In: Workshop in Energy Systems for the Built Environment, Cranfield University, 1993.

Working paper

DARKWA, K., 1997. Thermal energy storage in the power generation sector. UNSPECIFIED.