Items where Author is "Hughes-Riley, T"
![]() | Up a level |
Journal article
YU, X., CHEN, L., ZHANG, J., YAN, W., HUGHES-RILEY, T., CHENG, Y. and ZHU, M., 2024. Structural design of light-emitting fibers and fabrics for wearable and smart devices. Science Bulletin. ISSN 2095-9273
SHAHIDI, A.M., MARASINGHE, K., EBRAHIMI, P., WOOD, J., RAHEMTULLA, Z., JOBLING, P., OLIVEIRA, C., DIAS, T. and HUGHES-RILEY, T., 2024. Quantification of fundamental textile properties of electronic textiles fabricated using different techniques. Textiles, 4 (2), pp. 218-236. ISSN 2673-7248
BEEBY, S., YANG, K., TORAH, R., ISAIA, B. and HUGHES-RILEY, T., 2023. Preface of the 4th International Conference on the Challenges, Opportunities, Innovations and Applications in Electronic Textiles (E-Textiles 2022). Engineering Proceedings, 30 (1): 22. ISSN 2673-4591
TORAH, R., YANG, K., HUGHES-RILEY, T. and BEEBY, S., 2023. Statement of peer review. Engineering Proceedings, 30 (1): 21. ISSN 2673-4591
ABEYWICKRAMA, N., KGATUKE, M., MARASINGHE, K., NASHED, M.N., OLIVEIRA, C., SHAHIDI, A.M., DIAS, T. and HUGHES-RILEY, T., 2023. The design and development of woven textile solar panels. Materials, 16 (11): 4129. ISSN 1996-1944
RAHEMTULLA, Z., TURNER, A., OLIVEIRA, C., KANER, J., DIAS, T. and HUGHES-RILEY, T., 2023. The design and engineering of a fall and near-fall detection electronic textile. Materials, 16 (5): 1920. ISSN 1996-1944
LUGODA, P., HAYES, S.C., HUGHES-RILEY, T., TURNER, A., MARTINS, M.V., COOK, A., RAVAL, K., OLIVEIRA, C., BREEDON, P. and DIAS, T., 2022. Classifying gait alterations using an instrumented smart sock and deep learning. IEEE Sensors. ISSN 1530-437X
NASHED, M.N., MOGHADDASSIAN SHAHIDI, A., HUGHES-RILEY, T. and DIAS, T., 2022. Finite-element analysis of the mechanical stresses on the core structure of electronically functional yarns. Engineering Proceedings, 15 (1): 2. ISSN 2673-4591
MOGHADDASSIAN SHAHIDI, A., HUGHES-RILEY, T., OLIVEIRA, C. and DIAS, T., 2021. An investigation of the physical and electrical properties of knitted electrodes when subjected to multi-axial compression and abrasion. Proceedings, 68 (1): 2. ISSN 0035-9211
RAHEMTULLA, Z., HUGHES-RILEY, T. and DIAS, T., 2021. Vibration-sensing electronic yarns for the monitoring of hand transmitted vibrations. Sensors, 21 (8): 2780.
SATHARASINGHE, A., HUGHES-RILEY, T. and DIAS, T., 2020. A review of solar energy harvesting electronic textiles. Sensors, 20 (20): 5938. ISSN 1424-8220
HUGHES-RILEY, T., JOBLING, P., DIAS, T. and FAULKNER, S.H., 2020. An investigation of temperature-sensing textiles for temperature monitoring during sub-maximal cycling trials. Textile Research Journal. ISSN 0040-5175
HUGHES-RILEY, T., HILL-CASEY, F., OLIVEIRA, C., SHAHIDI, A., HURLEY, W. and DIAS, T., 2020. Understanding the design rules for a nonintrusive, textile, heart rate monitoring system. Digital Medicine, 5 (4), p. 162. ISSN 2226-8561
HARDY, D.A., RAHEMTULLA, Z., SATHARASINGHE, A., SHAHIDI, A., OLIVEIRA, C., ANASTASOPOULOS, I., NASHED, M.N., KGATUKE, M., KOMOLAFE, A., TORAH, R., TUDOR, J., HUGHES-RILEY, T., BEEBY, S. and DIAS, T., 2020. Wash testing of electronic yarn. Materials, 13 (5): 1228. ISSN 1996-1944
RAHEMTULLA, Z., HUGHES-RILEY, T. and DIAS, T., 2019. Developing a vibration-sensing yarn for monitoring hand-transmitted vibrations. Proceedings, 32 (1): 6. ISSN 2504-3900
SATHARASINGHE, A., HUGHES-RILEY, T. and DIAS, T., 2019. Solar energy-harvesting e-textiles to power wearable devices. Proceedings, 32 (1): 1. ISSN 2504-3900
HUGHES-RILEY, T., OLIVEIRA, C. and DIAS, T., 2019. A knitted multi-junction pressure sensor that uses electrical resistance to determine the applied pressure: development and characterization. Proceedings, 32 (1): 3. ISSN 2504-3900
HARDY, D.A., ANASTASOPOULOS, I., NASHED, M.-N., HUGHES-RILEY, T., KOMOLAFE, A., TUDOR, J., TORAH, R., BEEBY, S. and DIAS, T., 2019. Automated insertion of package dies onto wire and into a textile yarn sheath. Microsystem Technologies. ISSN 0946-7076
NASHED, M.-N., HARDY, D.A., HUGHES-RILEY, T. and DIAS, T., 2019. A novel method for embedding semiconductor dies within textile yarn to create electronic textiles. Fibers, 7 (2): 12. ISSN 2079-6439
HUGHES-RILEY, T., OLIVEIRA, C., MORRIS, R.H. and DIAS, T., 2019. The characterization of a pressure sensor constructed from a knitted spacer structure. Digital Medicine. ISSN 2226-8561
SATHARASINGHE, A., HUGHES-RILEY, T. and DIAS, T., 2018. Photodiodes embedded within electronic textiles. Scientific Reports, 8 (1): 16205. ISSN 2045-2322
LUGODA, P., HUGHES-RILEY, T., MORRIS, R. and DIAS, T., 2018. A wearable textile thermograph. Sensors, 18 (7): 2369. ISSN 1424-8220
LUGODA, P., HUGHES-RILEY, T., OLIVEIRA, C., MORRIS, R. and DIAS, T., 2018. Developing novel temperature sensing garments for health monitoring applications. Fibers, 6 (3): 46. ISSN 2079-6439
HUGHES-RILEY, T. and DIAS, T., 2018. Developing an acoustic sensing yarn for health surveillance in a military setting. Sensors, 18 (5): 1590. ISSN 1424-8220
HARDY, D.A., MONETA, A., SAKALYTE, V., CONNOLLY, L., SHAHIDI, A. and HUGHES-RILEY, T., 2018. Engineering a costume for performance using illuminated LED-yarns. Fibers, 6 (2): 35. ISSN 2079-6439
LUGODA, P., DIAS, T., HUGHES-RILEY, T. and MORRIS, R., 2018. Refinement of temperature sensing yarns. Proceedings, 2 (3), p. 123. ISSN 2504-3900
HUGHES-RILEY, T., DIAS, T. and CORK, C.R., 2018. A historical review of the development of electronic textiles. Fibers, 6 (2): 34. ISSN 2079-6439
HUGHES-RILEY, T., LUGODA, P., DIAS, T., TRABI, C.L. and MORRIS, R.H., 2017. A study of thermistor performance within a textile structure. Sensors, 17 (8), p. 1804. ISSN 1424-8220
LILBURN, D.M.L., TATLER, A.L., SIX, J.S., LESBATS, C., HABGOOD, A., PORTE, J., HUGHES-RILEY, T., SHAW, D.E., JENKINS, G. and MEERSMANN, T., 2016. Investigating lung responses with functional hyperpolarized xenon-129 MRI in an ex vivo rat model of asthma. Magnetic Resonance in Medicine, 76 (4), pp. 1224-1235. ISSN 0740-3194
UGGETTI, E., HUGHES-RILEY, T., MORRIS, R.H., NEWTON, M.I., TRABI, C.L., HAWES, P., PUIGAGUT, J. and GARCÍA, J., 2016. Intermittent aeration to improve wastewater treatment efficiency in pilot-scale constructed wetland. Science of The Total Environment, 559, pp. 212-217. ISSN 0048-9697
HUGHES-RILEY, T., DYE, E.R., ORTEGA ANDEREZ, D., HILL-CASEY, F., NEWTON, M.I. and MORRIS, R.H., 2016. Temperature dependence of magnetic resonance probes for use as embedded sensors in constructed wetlands. Sensors and Actuators A: Physical, 241, pp. 19-26. ISSN 0924-4247
LABELLA, A., CANIANI, D., HUGHES-RILEY, T., MORRIS, R.H., NEWTON, M.I., HAWES, P., PUIGAGUT, J., GARCÍA, J. and UGGETTI, E., 2015. Assessing the economic suitability of aeration and the influence of bed heating on constructed wetlands treatment efficiency and life-span. Ecological Engineering, 83, pp. 184-190. ISSN 0925-8574
HUGHES-RILEY, T., NEWTON, M.I., WEBBER, J.B.W., PUIGAGUT, J., UGGETTI, E., GARCÍA, J. and MORRIS, R.H., 2014. Advances in clog state monitoring for use in automated reed bed installations. Lakes, Reservoirs and Ponds, 8 (1), pp. 52-65. ISSN 1844-6477
HILL-CASEY, F., HUGHES-RILEY, T., BRADLEY, C.R., NEWTON, M.I. and MORRIS, R.H., 2014. Determining the clog state of constructed wetlands using an embeddable Earth's Field Nuclear Magnetic Resonance probe. Diffusion Fundamentals, 22 (2), pp. 1-7. ISSN 1862-4138
HUGHES-RILEY, T., WEBBER, J.B., NEWTON, M.I. and MORRIS, R.H., 2014. Magnetic resonance relaxation measurements using open-geometry sensors to assess the clog state of constructed wetlands. Diffusion Fundamentals, 22 (3), pp. 1-8. ISSN 1862-4138
Chapter in book
HUGHES-RILEY, T., SHAHIDI, A.M., MARASINGHE, K., RAHEMTULLA, Z., EHELAGASTHENNA, M., EBRAHIMI, P., ARM, R., OLIVEIRA, C., HOLMQUIST, L.E. and DIAS, T., 2024. Wearable electronic textiles for healthcare, wellbeing, and protective applications. In: CHI 24: extended abstracts of the 2024 CHI Conference on Human Factors in Computing Systems. New York: ACM. ISBN 9798400703317
HUGHES-RILEY, T., DIAS, T., KANER, J. and RAHEMTULLA, Z., 2021. Using an inertial motion unit to find the optimal location to continuously monitor for near falls. In: Sheldon 3rd Online Conference Meeting: Solutions for ageing well at home, in the community and at work. Proceedings book. Sheld-on Publications, pp. 135-142.
HUGHES-RILEY, T., SATHARASINGHE, A., OLIVEIRA, C. and DIAS, T., 2020. Engineering a pulse rate monitoring glove. In: A.K. SOOD, P. WIJEWARNASURIYA and A.I. D'SOUZA, eds., Proceedings of SPIE Optical Engineering + Applications 2020, Vol. 11503: Infrared sensors, devices, and applications X. Bellingham, WA: SPIE. ISBN 9781510638129
SATHARASINGHE, A., HUGHES-RILEY, T. and DIAS, T., 2019. Wearable and washable photovoltaic fabrics. In: F. LAMBERT, R. KENNY and P. HELM, eds., Proceedings of the EU PVSEC 2019. München, Germany: EU PVSEC, pp. 42-45. ISBN 3936338604
MCLAREN, A., HARDY, D.A. and HUGHES-RILEY, T., 2017. Electronic textiles and product lifetimes: exploring design strategies for product longevity. In: C. BAKKER and R. MUGGE, eds., PLATE: Product Lifetimes And The Environment: Conference Proceedings of PLATE 2017, Delft, the Netherlands, 8-10 November 2017. Research in design series, 9 . Amsterdam: IOS Press, pp. 473-476. ISBN 9781614998198
HAWES, P., HUGHES-RILEY, T., UGGETTI, E., ORTEGA ANDEREZ, D., NEWTON, M.I., PUIGAGUT, J., GARCÍA, J. and MORRIS, R.H., 2016. Clogging measurement, dissolved oxygen and temperature control in a wetland through the development of an autonomous reed bed installation (ARBI). In: J. VYMAZAL, ed., Natural and constructed wetlands: nutrients, heavy metals and energy cycling, and flow. Cham, Switzerland: Springer, pp. 165-177. ISBN 9783319389264
DYE, E.R., HUGHES-RILEY, T., NEWTON, M.I. and MORRIS, R.H., 2016. Non-invasive measurements of the dry solids content of whole potatoes using unilateral magnetic resonance: towards automation. In: G. GUTHAUSEN and J.V. DUYNHOVEN, eds., Proceedings of the XIII International Conference on the Applications of Magnetic Resonance in Food Science, Karlsruhe, Germany, 7-10 June 2016. Chichester: IM Publications Open, pp. 45-47. ISBN 9781906715243
HUGHES-RILEY, T., NEWTON, M.I., WEBBER, J.B.W., PUIGAGUT, J., UGGETTI, E., GARCIA, J. and MORRIS, R.H., 2014. Advances in automated reed bed installations. In: P. GÂŞTESCU, W. MARSZELEWSKI and P. BRETCAN, eds., Proceedings of the 2nd International Conference ‘Water Resources and Wetlands’, Tulcea, Romania, 11-13 September 2014. Târgoviște, Romania: Romanian Limnogeographical Association, pp. 454-460.
HUGHES-RILEY, T., NEWTON, M.I. and MORRIS, R.H., 2014. Temperature dependence of magnetic resonance sensors for embedding into constructed wetlands. In: 1st International Electronic Conference on Sensors and Applications (ECSA), 1-16 June 2014. Sciforum electronic conference series, 1 . Basel, Switzerland: MDPI, c006.
Conference contribution
SATHARASINGHE, A., HUGHES-RILEY, T. and DIAS, T., 2019. Photodiode and LED embedded textiles for wearable healthcare applications. In: 19th World Textile Conference (AUTEX 2019), Ghent, Belgium, 11-15 June 2019.
HARDY, D.A., ANASTASOPOULOS, I., NASHED, M.-N., OLIVEIRA, C., HUGHES-RILEY, T., KOMOLAFE, A., TUDOR, J., TORAH, R., BEEBY, S. and DIAS, T., 2018. An automated process for inclusion of package dies and circuitry within a textile yarn. In: Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2018), Rome, Italy, 22-25 May 2018.
HUGHES-RILEY, T. and DIAS, T., 2018. The development of acoustic and vibration sensing yarns for health surveillance. In: 25th International Congress on Sound and Vibration (ICSV25), Hiroshima, Japan, 8-12 July 2018.
NEWTON, M.I., HUGHES-RILEY, T. and MORRIS, R.H., 2015. Cost effective power amplifiers for pulsed NMR sensors. In: 2nd International Electronic Conference on Sensors and Applications (ESCA), [online] Basel, Switzerland, 15-30 November 2015.
DYE, E.R., HUGHES-RILEY, T., PARSLOW, S.T., NEWTON, M.I. and MORRIS, R.H., 2015. A Low Cost Magnetic Resonance Relaxometry Sensor. In: 2nd International Electronic Conference on Sensors and Applications (ESCA), [online] Basel, Switzerland, 15-30 November 2015.
HUGHES-RILEY, T., NEWTON, M.I. and MORRIS, R.H., 2015. Low-cost magnetic resonance sensors for process monitoring in the food industry<span></span>. In: 2nd International Electronic Conference on Sensors and Applications (ESCA), [online] Basel, Switzerland, 15-30 November 2015.
Digital or visual media
SHAHIDI, A., HUGHES-RILEY, T., MARASINGHE, K., NASHED, M.-N., OLIVEIRA, C. and DIAS, T., 2021. Process for manufacturing electronic yarns where the embedded components are soldered onto two parallel wires. [Digital or Visual Media]
Professional or trade journal contribution
HUGHES-RILEY, T. and DIAS, T., 2017. No more bad vibes: an innovative solution for hand transmitted vibrations. Health & Safety International (71), pp. 147-157. ISSN 1478-8829
DIAS, T. and HUGHES-RILEY, T., 2017. Electronically functional yarns transform wearable device industry. R&D Magazine, 59 (2), pp. 19-21.
DIAS, T. and HUGHES-RILEY, T., 2017. Sensors and surveillance battle bad vibrations. Tomorrow's Health & Safety, pp. 20-21. ISSN 2055-4737
HUGHES-RILEY, T., 2015. Autonomous reed bed installations. Water & Wastewater International, 30 (4). ISSN 0891-5385