Browse by ORCID

Journal article

FOBIRI, G.K., HOWARD, E.K., CRENTSIL, T., FRIMPONG, C. and HUGHES‐RILEY, T., 2025. Advances in Ti3C2TX MXene‐integrated conductive textiles for wearable biomedical sensors in health monitoring. Advanced Materials Technologies: e00008. ISSN 2365-709X

SHAHIDI, A.M., MARASINGHE, K., EBRAHIMI, P., OLIVEIRA, C., PERERA, N., BRIGGS-GOODE, A., DIAS, T. and HUGHES-RILEY, T., 2025. Design considerations for the creation of electronic yarns for wearable health monitoring devices. The Design Journal. ISSN 1460-6925

RAHEMTULLA, Z., WICKENDEN, R. and HUGHES-RILEY, T., 2025. Using a human centred design approach to develop a fall detection sock for older women. Design for Health. ISSN 2473-5132

LUGODA, P., OLIVEROS-MATA, E.S., MARASINGHE, K., BHAUMIK, R., PRETTO, N., OLIVEIRA, C., DIAS, T., HUGHES-RILEY, T., HALLER, M., MÜNZENRIEDER, N. and MAKAROV, D., 2025. Submersible touchless interactivity in conformable textiles enabled by highly selective overbraided magnetoresistive sensors. Communications Engineering, 4: 33. ISSN 2731-3395

ARM, R., SHAHIDI, A., PÎSLARU, A., MARASINGHE, K., BIBB, R. and HUGHES-RILEY, T., 2024. Mechanical behavior of oil-saturated silicone membranes for adipose tissue synthesis in clinical and theatrical prosthesis. Prosthesis, 6 (6), pp. 1340-1358. ISSN 2673-1592

DANG, C., WANG, Z., HUGHES-RILEY, T., DIAS, T., QIAN, S., WANG, Z., WANG, X., LIU, M., YU, S., LIU, R., XU, D., WEI, L., YAN, W. and ZHU, M., 2024. Fibres—threads of intelligence—enable a new generation of wearable systems. Chemical Society Reviews, 53 (17), pp. 8790-8846. ISSN 0306-0012

PERERA, N., SHAHIDI, A.M., MARASINGHE, K., KANER, J., OLIVEIRA, C., WICKENDEN, R., DIAS, T. and HUGHES-RILEY, T., 2024. Exploring sustainable approaches for electronic textile products and prototypes. Sensors, 24 (17): 5472. ISSN 1424-8220

YU, X., CHEN, L., ZHANG, J., YAN, W., HUGHES-RILEY, T., CHENG, Y. and ZHU, M., 2024. Structural design of light-emitting fibers and fabrics for wearable and smart devices. Science Bulletin. ISSN 2095-9273

SHAHIDI, A.M., MARASINGHE, K., EBRAHIMI, P., WOOD, J., RAHEMTULLA, Z., JOBLING, P., OLIVEIRA, C., DIAS, T. and HUGHES-RILEY, T., 2024. Quantification of fundamental textile properties of electronic textiles fabricated using different techniques. Textiles, 4 (2), pp. 218-236. ISSN 2673-7248

BEEBY, S., YANG, K., TORAH, R., ISAIA, B. and HUGHES-RILEY, T., 2023. Preface of the 4th International Conference on the Challenges, Opportunities, Innovations and Applications in Electronic Textiles (E-Textiles 2022). Engineering Proceedings, 30 (1): 22. ISSN 2673-4591

TORAH, R., YANG, K., HUGHES-RILEY, T. and BEEBY, S., 2023. Statement of peer review. Engineering Proceedings, 30 (1): 21. ISSN 2673-4591

ABEYWICKRAMA, N., KGATUKE, M., MARASINGHE, K., NASHED, M.N., OLIVEIRA, C., SHAHIDI, A.M., DIAS, T. and HUGHES-RILEY, T., 2023. The design and development of woven textile solar panels. Materials, 16 (11): 4129. ISSN 1996-1944

RAHEMTULLA, Z., TURNER, A., OLIVEIRA, C., KANER, J., DIAS, T. and HUGHES-RILEY, T., 2023. The design and engineering of a fall and near-fall detection electronic textile. Materials, 16 (5): 1920. ISSN 1996-1944

LUGODA, P., HAYES, S.C., HUGHES-RILEY, T., TURNER, A., MARTINS, M.V., COOK, A., RAVAL, K., OLIVEIRA, C., BREEDON, P. and DIAS, T., 2022. Classifying gait alterations using an instrumented smart sock and deep learning. IEEE Sensors. ISSN 1530-437X

NASHED, M.N., MOGHADDASSIAN SHAHIDI, A., HUGHES-RILEY, T. and DIAS, T., 2022. Finite-element analysis of the mechanical stresses on the core structure of electronically functional yarns. Engineering Proceedings, 15 (1): 2. ISSN 2673-4591

THEODORE, H.-R., JOBLING, P., DIAS, T. and FAULKNER, S., 2021. An investigation of temperature-sensing textiles for temperature monitoring during sub-maximal cycling trials. Textile Research Journal, 91 (5-6), pp. 624-645. ISSN 0040-5175

MOGHADDASSIAN SHAHIDI, A., HUGHES-RILEY, T., OLIVEIRA, C. and DIAS, T., 2021. An investigation of the physical and electrical properties of knitted electrodes when subjected to multi-axial compression and abrasion. Proceedings, 68 (1): 2. ISSN 0035-9211

RAHEMTULLA, Z., HUGHES-RILEY, T. and DIAS, T., 2021. Vibration-sensing electronic yarns for the monitoring of hand transmitted vibrations. Sensors, 21 (8): 2780.

SATHARASINGHE, A., HUGHES-RILEY, T. and DIAS, T., 2020. A review of solar energy harvesting electronic textiles. Sensors, 20 (20): 5938. ISSN 1424-8220

HUGHES-RILEY, T., HILL-CASEY, F., OLIVEIRA, C., SHAHIDI, A., HURLEY, W. and DIAS, T., 2020. Understanding the design rules for a nonintrusive, textile, heart rate monitoring system. Digital Medicine, 5 (4), p. 162. ISSN 2226-8561

HARDY, D.A., RAHEMTULLA, Z., SATHARASINGHE, A., SHAHIDI, A., OLIVEIRA, C., ANASTASOPOULOS, I., NASHED, M.N., KGATUKE, M., KOMOLAFE, A., TORAH, R., TUDOR, J., HUGHES-RILEY, T., BEEBY, S. and DIAS, T., 2020. Wash testing of electronic yarn. Materials, 13 (5): 1228. ISSN 1996-1944

SATHARASINGHE, A., HUGHES‐RILEY, T. and DIAS, T., 2019. An investigation of a wash‐durable solar energy harvesting textile. Progress in Photovoltaics: Research and Applications. ISSN 1062-7995

RAHEMTULLA, Z., HUGHES-RILEY, T. and DIAS, T., 2019. Developing a vibration-sensing yarn for monitoring hand-transmitted vibrations. Proceedings, 32 (1): 6. ISSN 2504-3900

SATHARASINGHE, A., HUGHES-RILEY, T. and DIAS, T., 2019. Solar energy-harvesting e-textiles to power wearable devices. Proceedings, 32 (1): 1. ISSN 2504-3900

HUGHES-RILEY, T., OLIVEIRA, C. and DIAS, T., 2019. A knitted multi-junction pressure sensor that uses electrical resistance to determine the applied pressure: development and characterization. Proceedings, 32 (1): 3. ISSN 2504-3900

HARDY, D.A., ANASTASOPOULOS, I., NASHED, M.-N., HUGHES-RILEY, T., KOMOLAFE, A., TUDOR, J., TORAH, R., BEEBY, S. and DIAS, T., 2019. Automated insertion of package dies onto wire and into a textile yarn sheath. Microsystem Technologies. ISSN 0946-7076

NASHED, M.-N., HARDY, D.A., HUGHES-RILEY, T. and DIAS, T., 2019. A novel method for embedding semiconductor dies within textile yarn to create electronic textiles. Fibers, 7 (2): 12. ISSN 2079-6439

HUGHES-RILEY, T., OLIVEIRA, C., MORRIS, R.H. and DIAS, T., 2019. The characterization of a pressure sensor constructed from a knitted spacer structure. Digital Medicine. ISSN 2226-8561

SATHARASINGHE, A., HUGHES-RILEY, T. and DIAS, T., 2018. Photodiodes embedded within electronic textiles. Scientific Reports, 8 (1): 16205. ISSN 2045-2322

LUGODA, P., HUGHES-RILEY, T., MORRIS, R. and DIAS, T., 2018. A wearable textile thermograph. Sensors, 18 (7): 2369. ISSN 1424-8220

LUGODA, P., HUGHES-RILEY, T., OLIVEIRA, C., MORRIS, R. and DIAS, T., 2018. Developing novel temperature sensing garments for health monitoring applications. Fibers, 6 (3): 46. ISSN 2079-6439

HUGHES-RILEY, T. and DIAS, T., 2018. Developing an acoustic sensing yarn for health surveillance in a military setting. Sensors, 18 (5): 1590. ISSN 1424-8220

HARDY, D.A., MONETA, A., SAKALYTE, V., CONNOLLY, L., SHAHIDI, A. and HUGHES-RILEY, T., 2018. Engineering a costume for performance using illuminated LED-yarns. Fibers, 6 (2): 35. ISSN 2079-6439

LUGODA, P., DIAS, T., HUGHES-RILEY, T. and MORRIS, R., 2018. Refinement of temperature sensing yarns. Proceedings, 2 (3), p. 123. ISSN 2504-3900

HUGHES-RILEY, T., DIAS, T. and CORK, C.R., 2018. A historical review of the development of electronic textiles. Fibers, 6 (2): 34. ISSN 2079-6439

PARSLOW, S.T., HUGHES-RILEY, T.W.B., NEWTON, M.I. and MORRIS, R.H., 2017. A magnetic resonance disruption (MaRDi) technique for the detection of surface immobilised magnetic nanoparticles. Analytical Methods. ISSN 1759-9660

HUGHES-RILEY, T., LUGODA, P., DIAS, T., TRABI, C.L. and MORRIS, R.H., 2017. A study of thermistor performance within a textile structure. Sensors, 17 (8), p. 1804. ISSN 1424-8220

LILBURN, D.M.L., TATLER, A.L., SIX, J.S., LESBATS, C., HABGOOD, A., PORTE, J., HUGHES-RILEY, T., SHAW, D.E., JENKINS, G. and MEERSMANN, T., 2016. Investigating lung responses with functional hyperpolarized xenon-129 MRI in an ex vivo rat model of asthma. Magnetic Resonance in Medicine, 76 (4), pp. 1224-1235. ISSN 0740-3194

UGGETTI, E., HUGHES-RILEY, T., MORRIS, R.H., NEWTON, M.I., TRABI, C.L., HAWES, P., PUIGAGUT, J. and GARCÍA, J., 2016. Intermittent aeration to improve wastewater treatment efficiency in pilot-scale constructed wetland. Science of The Total Environment, 559, pp. 212-217. ISSN 0048-9697

HUGHES-RILEY, T., DYE, E.R., ORTEGA ANDEREZ, D., HILL-CASEY, F., NEWTON, M.I. and MORRIS, R.H., 2016. Temperature dependence of magnetic resonance probes for use as embedded sensors in constructed wetlands. Sensors and Actuators A: Physical, 241, pp. 19-26. ISSN 0924-4247

LABELLA, A., CANIANI, D., HUGHES-RILEY, T., MORRIS, R.H., NEWTON, M.I., HAWES, P., PUIGAGUT, J., GARCÍA, J. and UGGETTI, E., 2015. Assessing the economic suitability of aeration and the influence of bed heating on constructed wetlands treatment efficiency and life-span. Ecological Engineering, 83, pp. 184-190. ISSN 0925-8574

HUGHES-RILEY, T., NEWTON, M.I., WEBBER, J.B.W., PUIGAGUT, J., UGGETTI, E., GARCÍA, J. and MORRIS, R.H., 2014. Advances in clog state monitoring for use in automated reed bed installations. Lakes, Reservoirs and Ponds, 8 (1), pp. 52-65. ISSN 1844-6477

HILL-CASEY, F., HUGHES-RILEY, T., BRADLEY, C.R., NEWTON, M.I. and MORRIS, R.H., 2014. Determining the clog state of constructed wetlands using an embeddable Earth's Field Nuclear Magnetic Resonance probe. Diffusion Fundamentals, 22 (2), pp. 1-7. ISSN 1862-4138

HUGHES-RILEY, T., WEBBER, J.B., NEWTON, M.I. and MORRIS, R.H., 2014. Magnetic resonance relaxation measurements using open-geometry sensors to assess the clog state of constructed wetlands. Diffusion Fundamentals, 22 (3), pp. 1-8. ISSN 1862-4138

Chapter in book

HUGHES-RILEY, T., SHAHIDI, A.M., MARASINGHE, K., RAHEMTULLA, Z., EHELAGASTHENNA, M., EBRAHIMI, P., ARM, R., OLIVEIRA, C., HOLMQUIST, L.E. and DIAS, T., 2024. Wearable electronic textiles for healthcare, wellbeing, and protective applications. In: CHI 24: extended abstracts of the 2024 CHI Conference on Human Factors in Computing Systems. New York: ACM. ISBN 9798400703317

HUGHES-RILEY, T., DIAS, T., KANER, J. and RAHEMTULLA, Z., 2021. Using an inertial motion unit to find the optimal location to continuously monitor for near falls. In: Sheldon 3rd Online Conference Meeting: Solutions for ageing well at home, in the community and at work. Proceedings book. Sheld-on Publications, pp. 135-142.

HUGHES-RILEY, T., SATHARASINGHE, A., OLIVEIRA, C. and DIAS, T., 2020. Engineering a pulse rate monitoring glove. In: A.K. SOOD, P. WIJEWARNASURIYA and A.I. D'SOUZA, eds., Proceedings of SPIE Optical Engineering + Applications 2020, Vol. 11503: Infrared sensors, devices, and applications X. Bellingham, WA: SPIE. ISBN 9781510638129

SATHARASINGHE, A., HUGHES-RILEY, T. and DIAS, T., 2019. Wearable and washable photovoltaic fabrics. In: F. LAMBERT, R. KENNY and P. HELM, eds., Proceedings of the EU PVSEC 2019. München, Germany: EU PVSEC, pp. 42-45. ISBN 3936338604

MCLAREN, A., HARDY, D.A. and HUGHES-RILEY, T., 2017. Electronic textiles and product lifetimes: exploring design strategies for product longevity. In: C. BAKKER and R. MUGGE, eds., PLATE: Product Lifetimes And The Environment: Conference Proceedings of PLATE 2017, Delft, the Netherlands, 8-10 November 2017. Research in design series, 9 . Amsterdam: IOS Press, pp. 473-476. ISBN 9781614998198

HAWES, P., HUGHES-RILEY, T., UGGETTI, E., ORTEGA ANDEREZ, D., NEWTON, M.I., PUIGAGUT, J., GARCÍA, J. and MORRIS, R.H., 2016. Clogging measurement, dissolved oxygen and temperature control in a wetland through the development of an autonomous reed bed installation (ARBI). In: J. VYMAZAL, ed., Natural and constructed wetlands: nutrients, heavy metals and energy cycling, and flow. Cham, Switzerland: Springer, pp. 165-177. ISBN 9783319389264

DYE, E.R., HUGHES-RILEY, T., NEWTON, M.I. and MORRIS, R.H., 2016. Non-invasive measurements of the dry solids content of whole potatoes using unilateral magnetic resonance: towards automation. In: G. GUTHAUSEN and J.V. DUYNHOVEN, eds., Proceedings of the XIII International Conference on the Applications of Magnetic Resonance in Food Science, Karlsruhe, Germany, 7-10 June 2016. Chichester: IM Publications Open, pp. 45-47. ISBN 9781906715243

HUGHES-RILEY, T., NEWTON, M.I., WEBBER, J.B.W., PUIGAGUT, J., UGGETTI, E., GARCIA, J. and MORRIS, R.H., 2014. Advances in automated reed bed installations. In: P. GÂŞTESCU, W. MARSZELEWSKI and P. BRETCAN, eds., Proceedings of the 2nd International Conference ‘Water Resources and Wetlands’, Tulcea, Romania, 11-13 September 2014. Târgoviște, Romania: Romanian Limnogeographical Association, pp. 454-460.

HUGHES-RILEY, T., NEWTON, M.I. and MORRIS, R.H., 2014. Temperature dependence of magnetic resonance sensors for embedding into constructed wetlands. In: 1st International Electronic Conference on Sensors and Applications (ECSA), 1-16 June 2014. Sciforum electronic conference series, 1 . Basel, Switzerland: MDPI, c006.

Conference contribution

SATHARASINGHE, A., HUGHES-RILEY, T. and DIAS, T., 2019. Photodiode and LED embedded textiles for wearable healthcare applications. In: 19th World Textile Conference (AUTEX 2019), Ghent, Belgium, 11-15 June 2019.

HARDY, D.A., ANASTASOPOULOS, I., NASHED, M.-N., OLIVEIRA, C., HUGHES-RILEY, T., KOMOLAFE, A., TUDOR, J., TORAH, R., BEEBY, S. and DIAS, T., 2018. An automated process for inclusion of package dies and circuitry within a textile yarn. In: Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2018), Rome, Italy, 22-25 May 2018.

HUGHES-RILEY, T. and DIAS, T., 2018. The development of acoustic and vibration sensing yarns for health surveillance. In: 25th International Congress on Sound and Vibration (ICSV25), Hiroshima, Japan, 8-12 July 2018.

NEWTON, M.I., HUGHES-RILEY, T. and MORRIS, R.H., 2015. Cost effective power amplifiers for pulsed NMR sensors. In: 2nd International Electronic Conference on Sensors and Applications (ESCA), [online] Basel, Switzerland, 15-30 November 2015.

DYE, E.R., HUGHES-RILEY, T., PARSLOW, S.T., NEWTON, M.I. and MORRIS, R.H., 2015. A Low Cost Magnetic Resonance Relaxometry Sensor. In: 2nd International Electronic Conference on Sensors and Applications (ESCA), [online] Basel, Switzerland, 15-30 November 2015.

HUGHES-RILEY, T., NEWTON, M.I. and MORRIS, R.H., 2015. Low-cost magnetic resonance sensors for process monitoring in the food industry<span></span>. In: 2nd International Electronic Conference on Sensors and Applications (ESCA), [online] Basel, Switzerland, 15-30 November 2015.

Digital or visual media

SHAHIDI, A., HUGHES-RILEY, T., MARASINGHE, K., NASHED, M.-N., OLIVEIRA, C. and DIAS, T., 2021. Process for manufacturing electronic yarns where the embedded components are soldered onto two parallel wires. [Digital or Visual Media]

Professional or trade journal contribution

HUGHES-RILEY, T. and DIAS, T., 2017. No more bad vibes: an innovative solution for hand transmitted vibrations. Health & Safety International (71), pp. 147-157. ISSN 1478-8829

DIAS, T. and HUGHES-RILEY, T., 2017. Electronically functional yarns transform wearable device industry. R&D Magazine, 59 (2), pp. 19-21.

DIAS, T. and HUGHES-RILEY, T., 2017. Sensors and surveillance battle bad vibrations. Tomorrow's Health & Safety, pp. 20-21. ISSN 2055-4737

HUGHES-RILEY, T., 2015. Autonomous reed bed installations. Water & Wastewater International, 30 (4). ISSN 0891-5385

Thesis

ARM, R.C., 2023. A mechanical study of synthetic soft tissue membranes for prosthesis. PhD, Nottingham Trent University.

RAHEMTULLA, Z., 2023. Electronic textile garments for fall and near-fall detection. PhD, Nottingham Trent University.