Items where Division is "School of Architecture, Design and the Built Environment" and Year is 2003

A

ABDELMONEM, M.G. and SELIM, G., 2003. Contemporary Islamic architecture in the Arab world. In: 18th Middle East History and Theory Conference, University of Chicago, Chicago, Illinois, United States, 9-10 May 2003.

ADAIR, A., BERRY, J., MCGREAL, S., POON, J., HUTCHISON, N., WATKINS, C. and GIBB, K., 2003. Benchmarking urban regeneration property performance in the UK. In: 19th American Real Estate Society Conference, Monterey, California, USA, 2-5 April 2003, Monterey.

ADAIR, A., BERRY, J., MCGREAL, S., POON, J., HUTCHISON, N., WATKINS, C. and GIBB, K., 2003. Benchmarking urban regeneration: RICS Findings in Building and Rural Environment (FiBRE). UNSPECIFIED.

ADAIR, A., BERRY, J., MCGREAL, S., POON, J., HUTCHISON, N., WATKINS, C. and GIBB, K., 2003. Investment performance within urban regeneration locations. In: 10th Conference of the European Real Estate Society, Helsinki, Finland, 10-13 June 2003, Helsinki.

ADAIR, A., BERRY, J., MCGREAL, S., POON, J., HUTCHISON, N., WATKINS, C. and GIBB, K., 2003. Investment performance within urban regeneration locations. In: UK Regional Property Investment Conference, London, July, 2003, London.

ADAIR, A.S., BERRY, J.N., MCGREAL, W.S., POON, J., HUTCHISON, N.E. and GIBB, K., 2003. Benchmarking urban regeneration performance: report to the Economic and Social Research Council (ESRC). UNSPECIFIED.

AIREY, G.D., RAHMAN, M.M. and COLLOP, A.C., 2003. Absorption of bitumen into crumb rubber using the basket drainage method. International Journal of Pavement Engineering, 4 (2), pp. 105-119. ISSN 1029-8436

AIREY, G.D., RAHMAN, M.M. and COLLOP, A.C., 2003. The influence of crude source and penetration grade on the interaction of crumb rubber and bitumen. Asphalt Rubber. In: Asphalt Rubber 2003 Conference, Brasilia, Brazil, Brasilia.

AL-HABAIBEH, A., GINDY, N. and PARKIN, R.M., 2003. Experimental design and investigation of a pin-type reconfigurable clamping system for manufacturing aerospace components. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 217 (12), pp. 1771-1777. ISSN 0954-4054

AL-HABAIBEH, A. and PARKIN, R., 2003. Low-cost mechatronic systems for teaching condition monitoring. International Journal of Engineering Education, 19 (4), pp. 615-622. ISSN 0949-149X

AL-HABAIBEH, A. and PARKIN, R., 2003. An autonomous low-cost infrared system for the on-line monitoring of manufacturing processes using novelty detection. International Journal of Advanced Manufacturing Technology, 22, pp. 249-258. ISSN 0268-3768

AL-HABAIBEH, A. and PARKIN, R.M., 2003. An automated low-cost condition monitoring system for quality control of automotive speedometers. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 217 (12), pp. 1763-1770. ISSN 0954-4054

AL-HABAIBEH, A., PARKIN, R.M. and JACKSON, M.R., 2003. International Conference on Mechatronics ICOM03. Bury St Edmunds: Professional Engineering Publishing. ISBN 1860584209

AL-HABAIBEH, A., PARKIN, R.M., JACKSON, M.R., WHITBY, D.R., MANSI, M. and COY, J., 2003. Condition based maintenance of machinery using autonomous infrared system. In: 16th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2003, Vaxjo, Sweden, 27 August 2003. UNSPECIFIED, pp. 535-544. ISBN 9176363767

AL-HABAIBEH, A., PARKIN, R.M., OTHMAN, F. and ALBAR, O., 2003. Investigation of an automated system for estimating people's density using infra-red thermal imaging. In: R.M. PARKIN, A. AL-HABAIBEH and M.R. JACKSON, eds., Proceedings of ICOM03, international conference on mechatronics. Bury St Edmunds: Professional Engineering Publishing,, pp. 371-376. ISBN 1860584209

AL-HABAIBEH, A., WHITBY, D.R., PARKIN, R.M., JACKSON, M.R., MANSI, M. and COY, J., 2003. Smart restraint systems utlizing low cost infrared sensing. In: R.M. PARKIN, A. AL-HABAIBEH and M.R. JACKSON, eds., Proceedings of ICOM03, international conference on mechatronics. Bury St Edmunds: UNSPECIFIED, pp. 255-260. ISBN 1860584209

AL-HABAIBEH, A., WHITBY, D.R., PARKIN, R.M., JACKSON, M.R., MANSI, M. and COY, J., 2003. The development of an Internet-based mechatronic system for remote diagnostic of machinery using embedded sensors. In: R.M. PARKIN, A. AL-HABAIBEH and M.R. JACKSON, eds., Proceedings of ICOM03, international conference on mechatronics. Bury St Edmunds: Professional Engineering Publishing, pp. 297-302. ISBN 1860584209

ALLMENDINGER, P. and WHITE, M., 2003. The impact of changing planning policies on the housing market. Urban Studies, 40 (56), pp. 953-972.

AMIN, N. and SU, D., 2003. Enhancement of speed and efficiency of an Internet based gear design optimisation. International Journal of Automotive Technology and Management, 3 (34), pp. 279-292. ISSN 1470-9511

ANUMBA, C.J., RUIKAR, D., AZIZ, Z., CARRILLO, P. and BOUCHLAGHEM, D., 2003. Towards a web of construction knowledge and services. In: Proceedings 4th Joint International ASCE Workshop on IT in Civil Engineering, Nashville.

ASHFORTH-FROST, S., 2003. A comparison between experimental and predicted flow profiles beneath a semi-confined axisymmetric impinging jet. In: Proceedings of ASME turbo expo power for land, sea and air. UNSPECIFIED, pp. 311-316. ISBN 0791836886

B

BANDYOPADHYAY, S., 2003. Conservation of an oasis settlement: the case of Manah. In: Regional Conference on the Conservation of Earthen Structures in Arab Countries. UNESCO/ Government of Oman, Muscat, Sultanate of Oman, 15-17 December 2003, Muscat.

BANDYOPADHYAY, S., 2003. Conservation of national heritage site of Harat al Bilad (Manah): approach, strategy and preliminary proposal [vols 1-2]. Muscat: Ministry of Heritage and Culture, Government of Oman.

BANDYOPADHYAY, S., 2003. Delhi: urban space and human destinies. Global Built Environment Review, 3 (1), pp. 66-67. ISSN 1474-6824; 1474-6832

BANDYOPADHYAY, S. and SIBLEY, M., 2003. The distinctive typology of central Omani mosques: its nature and antecedents. In: Proceedings of the seminar for Arabian studies. UNSPECIFIED, pp. 99-116. ISBN 0308-8421; 2503506321

BARDELL, R., BALENDRAN, V. and SIVAYOGANATHAN, K., 2003. Accuracy analysis of 3D data collection and free-form modelling methods. Journal of Materials Processing Technology, 133, pp. 26-33. ISSN 0924-0136

BAUM, A., CROSBY, N., GALLIMORE, P., MCALLISTER, P. and GRAY, A., 2003. Appraiser behaviour and appraisal smoothing: some qualitative and quantitative evidence. Journal of Property Research, 20 (3), pp. 261-280. ISSN 0959-9916

BIBBY, L., BOUCHLAGHEM, D. and AUSTIN, S., 2003. Design management in practice: testing a training initiative to deliver tools and learning. Construction Innovation: Information, Process, Management, 3 (4), pp. 217-229. ISSN 11471-4175

BIBBY, L., BOUCHLAGHEM, N. and SIMON, A., 2003. Improving design management in practice, a case study. IT in Architecture, Engineering and Construction, 1 (1), pp. 57-66. ISSN 1570-7822

BLISMAS, N.G., GIBB, A.G.F., PASQUIRE, C.L. and ALDRIDGE, G.B., 2003. Changing perceptions of value in construction standardisation and pre-assembly. In: 2nd International Conference on Innovation in Architecture, Engineering and Construction, Loughborough University, Loughborough, June 2003, Loughborough.

BLISMAS, N.G., PASQUIRE, C.L. and GIBB, A.G.F., 2003. IMMPREST. Loughborough: Loughborough University. ISBN 094797413X

BLISMAS, N.G., PASQUIRE, C.L., GIBB, A.G.F. and ALDRIDGE, G.B., 2003. IMMPREST - interactive method for measuring pre-assembly and standardisation benefit in construction. [Software]

BOUCHLAGHEM, D. and REZGUI, Y., 2003. Briefing and design management in construction. IT in Architecture, Engineering and Construction, 1 (1), pp. 5-7. ISSN 1570-7822

BOUCHLAGHEM, N.M., ANUMBA, C.J., SHANG, H., CEN, M., MILES, J. and TAYLOR, M., 2003. Concurrent engineering at conceptual design stage in the AEC industry. In: Proceedings of the 10th ISPE International Conference on Concurrent Engineering, Madeira.

BREACH, M., 2003. Is there life after military survey? The Ranger: Journal of the Defence Surveyors' Association, 2 (6), p. 34. ISSN 0032-6348

BREEDON, P.J., 2003. Muscle machine robot. Stelarc public perfomances, 291 Gallery, Lonon, July, 2003. .

BREEDON, P.J., 2003. Muscle machine robot. Stelarc public perfomances, Nottingham Trent University. .

BROCKLEHURST, D., BOUCHLAGHEM, D., PITFIELD, D.E. and PALMER, G., 2003. Overview of design issues relating to racecourse circulation. In: Pedestrian and Evacuation Dynamics Conference, University of Greenwich, 2003.

C

CASAMAYOR, J., 2003. Domus Mediterranea. 'Furnishing the future house'. Valencian International Furniture Fair (FIM), Valencia, Spain, 2003.

CASAMAYOR, J., 2003. NUDE. Valencian International Furniture Fair (FIM), Valencia, Spain, 2003.

CHEONG, S.P.C., ANUMBA, C.J., HILL, R. and BOUCHLAGHEM, D., 2003. Improving client satisfaction through functional briefing, winds of change: integration and innovation in construction. In: Proceedings ASCE Construction Research Congress, Honolulu.

CHEONG, S.P.C., ANUMBA, C.J., HILL, R. and BOUCHLAGHEM, D., 2003. Improving client satisfaction through whole life performance. In: Proceedings of 3rd International Postgraduate Research Conference, Lisbon.

CHILTON, J.C. and DEVULDER, T., 2003. Environmental aspects of the Inland Revenue amenity building, Nottingham, UK. In: TechTextil Symposium, Frankfurt, April, 2003 [conference proceedings], Frankfurt.

CHILTON, J.C. and DEVULDER, T., 2003. Environmental monitoring at the Inland Revenue amenity building, Nottingham. In: M. MOLLAERT, J. HAASE and J.C. CHILTON, eds., Designing Tensile Architecture, VUB, Brussels, 2003 [conference proceedings]. UNSPECIFIED, pp. 44-51. ISBN 7.89E+11

CHILTON, J.C. and DEVULDER, T., 2003. Some environmental aspects of tensile membrane enclosures. In: Textile Roofs 2003, Berlin, June, 2003 [conference proceedings].

COLLINS, P.R., 2003. The role of external examiners. In: European Educational Conference, Bruges, Belgium.

COOPER, T., 2003. Beyond recycling. In: D. BOYLE and A. SIMMS, eds., News from somewhere. London: New Economics Foundation, pp. 71-74.

COOPER, T., 2003. Britain's sustainable consumption strategy: signals at the starting line. In: Empowering the Consumer in the 21st Century: Institute of Consumer Sciences International Research Conference, Cardiff, July 2003, Cardiff.

COOPER, T., 2003. Durability and the inconsistent consumer. In: Time in Design: Eternally Yours Conference, Eindhoven, October 2003, Eindhoven.

COY, J., AL-HABAIBEH, A., PARKIN, R.M., JACKSON, M.R., WHITBY, D.R. and SENIOR, M., 2003. Low cost thermal imaging system for condition-based maintenance of mail sorting machines. In: Proceedings of the 15th international conference on postal automation, Windsor, UK.

CRESSWELL, A.W. and BARTON, M.E., 2003. Direct shear tests on an uncemented, and a very slightly cemented, locked sand. Quarterly Journal of Engineering Geology and Hydrogeology, 36, pp. 119-132. ISSN 1470-9236

CUTTING-DECELLE, A.F., YOUNG, R., ANUMBA, C., BALDWIN, A. and BOUCHLAGHEM, N., 2003. The application of PSL in product design across construction and manufacturing. Concurrent Engineering - Research and Application Journal (CERA), 11 (1), pp. 65-75. ISSN 1063-293X

D

DARKWA, K., 2003. Development of phase change drywall systems. In: Conference on Technological Developments in the Built Environment, BRE, Garston, Watford, UK, 23 September 2003, BRE, Garston, Watford.

DARKWA, K., 2003. Thermal assessment of integrated phase change drywall systems. In: Proceedings of the 1st International Energy Conversion Engineering Conference, Portsmouth, USA.

E

ECCLES, T., 2003. Accounting practice in the post Enron era: the implications for financial statements in the property industry. Briefings in Real Estate Finance, 2 (4), pp. 326-340.

ELNOKALY, A., CHILTON, J.C. and WILSON, R., 2003. Airflow around conic tensile membrane structures [printed refereed extended abstract; conference paper on CD-ROM]. In: Proceedings of IASS Symposium, Taipei, 2003, Taipei.

ELNOKALY, A., CHILTON, J.C. and WILSON, R., 2003. Environmental performance of spaces enclosed or semi-enclosed by fabric membrane structures. In: Textile Composites and Inflatable Structures, CIMNE, Barcelona, 2003 [conference proceedings].

ELNOKALY, A., CHILTON, J.C. and WILSON, R., 2003. Thermal performance of spaces enclosed by fabric membrane structures. In: Structural Membranes 2003, Barcelona, May, 2003 [conference proceeding], Barcelona.

ELNOKALY, A., CHILTON, J.C. and WILSON, R., 2003. Use of fabric membrane topology as an intermediate environment modifier. In: Passive and Low Energy Architecture (PLEA), Santiago, Chile, November, 2003 [conference proceedings], Santiago, Chile.

EVANS, R., 2003. Current themes, issues and challenges concerning the prediction of subsurface conditions. In: M.S. ROSENBAUM and A.K. TURNER, eds., Characterisation of the shallow subsurface: implications for urban infrastructure and environmental assessment. Dusseldorf: Springer-Verlag. ISBN 3540437762

EVANS, S. and COOPER, T., 2003. Consuming to last: the complexities and contradictions of optimising product life in contemporary society. In: British Sociological Association Annual Conference, York, April 2003, York.

EVANS, S. and COOPER, T., 2003. Waste not, want not? An exploration of the effect of consumer behaviour on the service life of three categories of household product. In: Chartered Institution of Wastes Management Annual Conference, Paignton, June 2003, Paignton.

G

GARMA, M. and BOEZIO, M., 2003. Sisyphus 02. .

GARMA MONTIEL, G. and OLMOS, T., 2003. Sisyphus 01. .

GENTLE, C.R., CRISP, A.R. and LORD, J., 2003. Inclusive product design (ethics and sustainability): project teaching using a major study project as the vehicle (School of Engineering, Nottingham Trent University). In: Conference, organised by IED working group for Design Education Teaching, Bournemouth University, September 2003, Bournemouth.

GOODHEW, S., 2003. [Chapters concerning the moisture and thermal properties of light earth materials]. In: C. MORGAN, ed., Milestone 5: DTI report. UNSPECIFIED.

GOODHEW, S., 2003. Sustainability in construction: learning packs. University of Plymouth.

GOODHEW, S.M.R., TURPIN-BROOKS, S. and TAPP, T., 2003. E-learning in design, construction and property: case studies in motivation. In: CIB Working Commission W89, Building Education and Research (BEAR) Conference, Salford, March, 2003, Salford.

GREENWOOD, J.R., 2003. Geosynthetics: protecting the environment. In: Proceedings of the 1st IGS UK Chapter National Geosynthetics Symposium, Nottingham.

GREENWOOD, J.R., NORRIS, J.E., WINT, J. and BARKER, D.H., 2003. Bioengineering and the transportation infrastructure. In: Transportation geotechnics: proceedings of the symposium held at the Nottingham Trent University School of Property and Construction on 11 September 2003. London: Thomas Telford, pp. 205-220. ISBN 0727732498

GRIFFITH, A., KING, A.P. and KNIGHT, A.D., 2003. Best practice tendering for design and build projects. London: Thomas Telford. ISBN 9780727732187

H

HENDERSHOTT, P., PRYCE, G. and WHITE, M., 2003. Household leverage and the deductibility of home mortgage interest: evidence from UK new borrowers. Journal of Housing Research, 14 (1), pp. 49-82.

HOXLEY, M. and ROWSELL, R., 2003. The effective use of video in construction technology education. In: Proceedings of the CIB W89 International Conference on Building Education and Research (BEAR 2003).

HUGHES, T., DEVULDER, T., HUGHES, A. and SNELL, J., 2003. So far.... .

HULL, J.B., SU, D. and JI, S., 2003. Development of a powerful software tool for collaborative design and manufacture over the Internet. In: Proceedings of the International Conference on Industrial Tools, Bled, Slovenia.

HURST, A., 2003. Learning the principles of construction management via an interactive web base. In: Best practice in building education case study 3B. UNSPECIFIED, p. 18.

J

JAYNE, M., 2003. The leasing and management of industrial buildings: potential environmental liabilities. In: European Real Estate Society Conference, Helsinki, Finland, 2003, Helsinki.

JAYNE, M. and SKERRATT, G., 2003. Socially responsible investment in the UK - criteria that are used to evaluate suitability. Corporate Social Responsibility and Environmental Management, 10, pp. 1-11. ISSN 1635-3958

JAYNE, M. and SKERRATT, G., 2003. The requirements of ethical fund managers and property investment. Property Management, 21 (2), pp. 136-152. ISSN 0263-7472

JAYNE, M. and SYMS, P., 2003. Potential environmental liabilities with industrial properties in the United Kingdom. Journal of Real Estate Portfolio Management, 9 (3), pp. 237-250.

JAYNE, M. and SYMS, P., 2003. Potential environmental liabilities with industrial properties in the United Kingdom [prize winning paper]. In: American Real Estate Conference, Monterey, CA, USA, 2003, Monterey.

JAYNE, M. and SYMS, P., 2003. The leasing and management of industrial buildings: potential environmental liabilities for landlords and tenants. In: 10th European Real Estate Conference, Helsinki, Finland, 2003, Helsinki.

JAYNE, M. and WILBOURNE, P., 2003. Contaminated land. In: P. ASKHAM, ed., Valuation: special properties and purposes. London: Estates Gazette, pp. 97-125. ISBN 728204185

JEFFERSON, I.F., EVSTATIEV, D., KARASTANEV, D., MAVLYANOVA, N.G. and SMALLEY, I.J., 2003. Engineering geology of loess and loess-like deposits: a commentary on the Russian literature. Engineering Geology, 68, pp. 333-351. ISSN 0013-7952

JOHNSON, D., MAY, I., BEER, G. and WOOD, R., 2003. The future of structural analysis teaching. Structural Engineer, 81 (7), pp. 33-37. ISSN 1466-5123

K

KAMARA, J.M., ANUMBA, C.J., CARRILLO, P.M. and BOUCHLAGHEM, N., 2003. Conceptual framework for live capture and reuse of project knowledge. In: Proceedings of the CIB W78's 20th International Conference on Information Technology for Construction, Auckland.

KASHYAP, M., KHALFAN, M. and ZAINUL-ABIDIN, N., 2003. A proposal for achieving sustainability in construction projects through concurrent engineering. In: Proceedings of COBRA 2003 Conference, Wolverhampton.

KHALFAN, M., BOUCHLAGHEM, D., ANUMBA, C. and CARRILLO, P., 2003. Knowledge management for sustainable construction: the C-SanD project, winds of change: integration and innovation in construction. In: Proceedings ASCE Construction Research Congress, Honolulu.

KHALFAN, M., BOUCHLAGHEM, D., ANUMBA, C. and CARRILLO, P., 2003. Moving towards more sustainable construction. In: 3rd International Postgraduate Research Conference in the Built and Human Environment, 3-4 April 2003.

KHALFAN, M.M.A., BOUCHLAGHEM, N.M., ANUMBA, C.J. and CARRILLO, P.M., 2003. Achieving sustainability in construction projects through concurrent engineering. In: 2nd International Conference on Innovation in Architecture, Engineering and Construction, Loughborough University, Loughborough, 25-27 June 2003, Loughborough.

KIM, J. and DARKWA, K., 2003. Simulation of integrated PCM-wallboard system. International Journal of Energy Research, 27 (3), pp. 215-223.

KIM, J.S. and DARKWA, K., 2003. Simulation of an integrated PCM-wallboard system. International Journal of Energy Research, 27 (3), pp. 215-223. ISSN 0363-907X

KNIGHT, A.D., 2003. The use of Win Econ and an annotated bibliography as two tools to support the achievement of Masters Level learning outcomes in a post-graduate Construction Economics Unit. In: Best practice in building: section F: teaching and learning assessment. Coventry: Coventry University.

KNIGHT, A.D., GRIFFITH, A.P. and KING, A., 2003. Examining the dynamics of novation from the principal contractor's and architect's perspectives. The Australian Journal of Construction Economics and Building, 3 (1), pp. 13-18.

KNIGHT, M.G., WROBEL, L.C. and HENSHALL, J.L., 2003. Fracture response of fibre-reinforced materials with macro/microcrack damage using the Boundary Element Technique. International Journal of Fracture, 121, pp. 163-182. ISSN 0376-9429

KNIGHT, M.G., WROBEL, L.C. and HENSHALL, J.L., 2003. Micromechanical response of fibre-reinforced materials using the boundary element technique. Composite Structures, 62, pp. 341-352. ISSN 0263-8223

L

LAI, H., YAN, Y.Y. and GENTLE, C.R., 2003. Calculation procedure for conjugate viscous flows about and inside single bubbles. Numerical Heat Transfer Part B - Fundamentals, 43 (3), pp. 241-265. ISSN 1040-7790

LI, W.Z., YAN, Y.Y. and HULL, J.B., 2003. The propagnation of temperature and concentration fields around a deformed gas bubble rising in a quiescent hot or bi-solution liquid. International Journal of Numerical Methods for Heat & Fluid Flow, 13 (8), pp. 940-963. ISSN 0961-5539

LI, W.Z., YAN, Y.Y. and SMITH, J.M., 2003. A numerical study of the interfacial transport characteristics outside spheroidal bubbles and solids. International Journal of Multiphase Flow, 29 (3), pp. 435-460. ISSN 0301-9322

LIM, K.K., IANAKIEV, A. and HULL, J.B., 2003. Numerical modelling for rotational moulding with non-isothermal heating. Plastics, Rubber and Composites, 32 (10), pp. 421-430. ISSN 1465-8011

LIM, K.K., IANAKIEV, A. and HULL, J.B., 2003. Numerical modelling for rotational moulding with non-isothermal heating. Plastics, Rubber and Composites, 32 (10), pp. 421-430. ISSN 1465-8011

LIM, K.K., IANAKIEV, A. and HULL, J.B., 2003. Predictions of heating cycle for rotational moulding with non-isothermal heating. In: LUXFEM Conference (1st International Conference on Finite Element Application), Luxemburg, 2003, Luxemburg.

LU, P., JEFFERSON, I.F., ROSENBAUM, M.S. and SMALLEY, I.J., 2003. Fractal characteristics of loess formation: evidence from laboratory experiments. Engineering Geology, 69, pp. 287-293. ISSN 0013-7952

M

MAGUIRE, K. and HOWARD, M., 2003. Risk and safety of the kitchen brigade - who cares? The Hospitality Review, pp. 33-38.

MANSFIELD, J.R., 2003. Refurbishment: a re-evaluation of its characteristics and definition. Construction Information Quarterly, 5 (1), pp. 8-17. ISSN 1469-4891

MARSH, J.A. and MOOHAN, J.A.J., 2003. Small firms in rural areas: experiences of victimisation. Security Journal, 16 (1), pp. 39-49. ISSN 0955-1662

MEDJDOUB, B., 2003. Augmented reality and architectural communication. In: Design for Competitive Advantage Conference, Broadway cinema, Nottingham, June 2003.

MEDJDOUB, B., 2003. Digital art in architecture. [Digital or Visual Media]

MEDJDOUB, B., 2003. Virtual reality in the design studio. In: Conference in Education, University of Nottingham, Nottingham, September 2003.

MEDJDOUB, B., RICHENS, P. and BARNARD, N., 2003. Generation of variational standard plant room solutions. Automation in Construction, 12 (2), pp. 155-166. ISSN 0926-5805

MILES, J.C., BOUCHLAGHEM, N.M., ANUMBA, C.J., CEN, M., TAYLOR, M. and SHANG, H., 2003. Concurrent conceptual design for the AEC industry. In: Proceedings of ASCE Structures Conference.

MILES, J.C., BOUCHLAGHEM, N.M., ANUMBA, C.J., CEN, M., TAYLOR, M. and SHANG, H., 2003. Web-based concurrent conceptual design. In: Proceedings 7th International Conference on AI in Civil & Structural Engineering.

MOHAMMAD, F.A., 2003. Three dimensional finite element modelling of surface initiated cracks in a flexible pavement system. UNSPECIFIED, pp. 1-52.

MOHAMMAD, F.A., COLLOP, A.C. and BROWN, S.F., 2003. An analytical and experimental assessment of flexible road ironwork support structures. Proceedings of the ICE - Municipal Engineer, 156 (4), pp. 281-287. ISSN 0965-0903; 1751-7699

MOHAMMAD, F.A., COLLOP, A.C. and BROWN, S.F., 2003. An analytical and experimental assessment of flexible road ironwork support structures. Proceedings of the ICE - Municipal Engineer, 156 (4), pp. 281-287. ISSN 0965-0903; 1751-7699

MOLLAERT, M., HAASE, J., CHILTON, J.C., MONCRIEFF, E., DENCHER, M. and BARNES, M., 2003. Designing tensile architecture. Brussels: VUB. ISBN 789000000000

MORLEDGE, R., 2003. Editorial. The Journal of Construction Procurement, 9 (1), p. 2. ISSN 1358-9180

MORLEDGE, R., 2003. Leader commentary. In: S. FOXELL, ed., The professionals' choice : the future of the built environment professions. London: Building Futures(RIBA/CABE). ISBN 1859461409

MORLEDGE, R., 2003. The characteristics of current procurement systems [keynote]. In: Royal Institution of Chartered Surveyors Conference, Stirling, 2003, Stirling.

MORLEDGE, R. and ADNAN, H., 2003. Application of Delphi methods to research on critical success factors in joint venture projects in Malaysia. In: C.O. EGBU and C.O. TONG, eds., Proceedings of the First Scottish Conference for Postgraduate Researchers of the Built and Natural Environment. Glasgow: Glasgow Caledonian University, School of the Built and Natural Environment, Glasgow Caledonian University, Glasgow, Scotland, 18-19 November 2003, pp. 41-50. ISBN 1903661501

MORLEDGE, R. and ADNAN, H., 2003. Application of Delphi methods to research on critical success factors in joint venture projects in Malaysia. In: Proceedings of the second international conference on construction in the 21st century :sustainability and innovation in management and technology, Hong Kong.

MORLEDGE, R. and ADNAN, M., 2003. Critical success factors in Malaysian joint venture projects. In: Proceedings of the Construction and Building Research Conference of the Royal Institution of Chartered Surveyors Research Foundation. UNSPECIFIED, pp. 79-86. ISBN 1842191489

MORLEDGE, R., GRADA, A. and GRADA, M., 2003. The relevance of economic value added in assessing business performance. In: Proceedings of Joint International Symposium of CIB Working Commissions, Singapore.

N

NAVA, C. and QUATTRONE, G., 2003. Recupero e riuso di manufatti, componenti e materiali in edilizia. Reggio Calabria: Falzea Editore.

NORRIS, J.E., 2003. 'Layers of understanding'. Meeting report of the International Geosynthetics Society UK Chapter. First National Geosynthetics Symposium. Ground Engineering, p. 38.

NORRIS, J.E. and GREENWOOD, J.R., 2003. In-situ shear box and root pull-out apparatus for measuring the reinforcing effects of vegetation. In: F. MYRVOLL, ed., Field measurements in geomechanics. Lisse: Swets & Zeitlinger, pp. 593-597. ISBN 9058096025

NORRIS, J.E. and GREENWOOD, J.R., 2003. Root reinforcement on unstable slopes in Northern Greece and Central Italy. In: International Conference on Problematic Soils, Nottingham Trent University, Nottingham, UK, July 2003, Nottingham Trent University, Nottingham, UK.

NOTINI, L., AL-HABAIBEH, A., ZORRIASSATINE, F., PARKIN, R.M., JACKSON, M.R. and COY, J., 2003. Condition monitoring of belt based power transmission systems using low resolution thermal imaging. In: R.M. PARKIN, A. AL-HABAIBEH and M.R. JACKSON, eds., Proceedings of ICOM03, international conference on mechatronics. Bury St Edmunds: UNSPECIFIED. ISBN 1860584209

O

ODEYINKA, H.A., KAKA, A. and MORLEDGE, R., 2003. An evaluation of construction cash flow management approaches in contracting organizations. In: Proceedings of the 19th Annual ACROM Conference, Brighton.

ODEYINKA, H.A. and YUSIF, A., 2003. An assessment of the accuracy of quantity surveyors' preliminary cost estimates in Nigeria. Construction Engineering Journal, 18 (1), pp. 33-38.

P

PAOLELLA, A., NAVA, C. and QUATTRONE, G., 2003. Recupero e riuso di materiali, manufatti e componenti in sistemi tecnologici a basso impatto ambientale. Caso-studio: applicazione ad un insediamento rurale urbano in località S. Sperato a Reggio Calabria. In: La ricerca applicata nel campo del riciclo e gestione dei rifiuti, tecnologie e controllo ambientale. Seminario Ecomondo, Rimini, Italy, 22-25 October 2003, Rimini.

PARKIN, R.M. and AL-HABAIBEH, A., 2003. Control of a heat patch monitoring system. In: Proceedings of the IEEE International Conference on Industrial Technology, Maribor, Slovenia.

PASQUIRE, C.L. and CONNOLLY, G.E., 2003. Design for manufacture and assembly. In: 11th Annual Conference of the International Group for Lean Construction, Blacksburg, USA, July 2003. UNSPECIFIED, pp. 184-194. ISBN 972125744

PILGRIM, M., BOUCHLAGHEM, N.M., LOVEDAY, D.L. and HOLMES, M., 2003. Towards the efficient use of simulation in construction: a user survey. Journal of Building Services Engineering Research and Technology, 24 (3), pp. 149-162.

POON, J., 2003. Professional ethics for surveyors and construction project performance: what we need to know. In: Proceedings of the Construction and Building Research (COBRA) Conference, Wolverhampton.

POON, J., POTTS, K. and MUSGROVE, P., 2003. CONBPS: an expert system to improve the efficiency of the construction process. Royal Institution of Chartered Surveyors (RICS) Research Papers, 4 (21).

POON, J., POTTS, K. and MUSGROVE, P., 2003. CONBPS: an expert system to improve the efficiency of the construction process. Royal Institution of Chartered Surveyors (RICS) Research Papers, 4 (21).

Q

QUATTRONE, G., 2003. Recupero e riuso di manufatti, componenti e materiali per il progetto tecnologico di insediamenti ambientalmente e socialmente efficienti - insediamenti rurali urbani. In: Verso un nuovo urbanesimo - Ecologia degli insediamenti, Verso un nuovo urbanesimo - Ecologia degli insediamenti, XIII Seminario di Architettura e Cultura Urbana, Camerino, Italy, 27-31 July 2003, Camerino.

QUEK, R., 2003. Scepticism and progress in architecture: Adolf Loos' Chicago Tribune Tower. In: Progress: The Proceedings of the Twentieth Annual Conference of the Society of Architectural Historians Australia and New Zealand (SAHANZ), Sydney, October 2003. UNSPECIFIED, pp. 242-251. ISBN 1864875747

R

REAVLEY, G., 2003. The Royal Tenenbaums - film review. Scope: an Online Journal of Film and Television Studies. ISSN 1465-9166

REN, X.J., HOOPER, R.M., GRIFFITHS, C. and HENSHALL, J.L., 2003. Indentation size effect in ceramics: correlation with H/E. Journal of Materials Science Letters, 22 (15), pp. 1105-1106. ISSN 0261-8028

REZGUI, Y., BOUCHLAGHEM, N., AUSTIN, A. and BARRETT, P., 2003. A proposed IT-based approach for managing the construction briefing effectively. IT in Architecture, Engineering and Construction, 1 (1), pp. 25-38. ISSN 1570-7822

RIDGWAY, J.S., HULL, J.B. and GENTLE, C.R., 2003. A PRIME approach for the moulding of conduit ceramic parts. Journal of Materials Processing Technology, 133, pp. 181-188. ISSN 0924-0136

RIZZUTO, J.P. and CHILTON, J.C., 2003. Mutually supported cylindrical elements [printed refereed extended abstract; conference paper on CD-ROM]. In: Proceedings of IASS Symposium, Taipei, 2003, Taipei.

RODRIGUEZ, C. and CHILTON, J.C., 2003. Deployable rings with plates and straight bars. Journal of the International Association for Shell and Spatial Structures: IASS, 44 (3143), pp. 181-188. ISSN 0304-3822

RODRIGUEZ, C. and CHILTON, J.C., 2003. Deployable rings with plates and straight bars. In: Proceedings of IASS Symposium, Taipei, 2003, Taipei.

RONALD, R., 2003. Japan as a homeowner society: the role of housing and homeownership ideology in Anglo-Saxon and Japanese contexts. PhD, Nottingham Trent University.

ROOT, D.S., BLISMAS, N.G. and PASQUIRE, C.L., 2003. Increasing questionnaire responses from industry: practices surrounding the use of postal questionnaires. In: 19th Annual ARCOM Conference, University of Brighton, September 2003, Brighton.

ROSENBAUM, M.S. and CULSHAW, M.G., 2003. Communicating the risks arising from geohazards. Journal of the Royal Statistical Society: Series A (Statistics in Society), 166 (2), pp. 261-270. ISSN 0964-1998

ROSENBAUM, M.S., MCMILLAN, A.A., POWELL, J.H., COOPER, A.H., CULSHAW, M.G. and NORTHMORE, K.J., 2003. Classification of artificial (man-made) ground. Engineering Geology, 69, pp. 399-409. ISSN 0013-7952

ROYSTON, P., 2003. Beyond finance theory: how framing influences the behaviour of real estate investors. In: 10th European Real Estate Society Conference, Helsinki, Finland, June 2003, Helsinki, Finland.

RUMNEY, P., 2003. Teaching and creativity. In: ACE Artsmark Awards, Northampton Theatre Royal, Northampton, 2003, Northampton.

RUMNEY, P., 2003. Theatre for Young People [keynote speaker]. In: Spark Festival, Leicester, 2003, Leicester.

RUMNEY, P., 2003. Young people and reading. In: ACA Conference, Worcester College Oxford, Oxford, 2003, Worcester College Oxford.

RUMNEY, P., 2003. The designer as writer. In: '2D>3D' SBTD Education Conference, Sheffield Crucible, Sheffield, 2003, Sheffield.

RUMNEY, P., 2003. The writer's authentic voice. In: EXPO, Writernet, Soho Theatre, London, 2003, London.

S

SARGENT, P.T.H., 2003. An alternative view of the FD Prospectus model. In: QAA Higher Education Further Conference, Nottingham, UK, 22 November 2003, Nottingham.

SATSANGI, M. and DUNMORE, K., 2003. The planning system and the provision of affordable housing in rural Britain: a comparison of the Scottish and English experience. Housing Studies, 18 (2), pp. 201-217. ISSN 0267-3037

SHANG, H., ANUMBA, C.J., BOUCHLAGHEM, N.M., MILES, J., CEN, M. and TAYLOR, M., 2003. An integrated architecture for concurrent conceptual design. In: 2nd International Conference on Innovation in Architecture, Engineering and Construction (AEC), Loughborough University, Loughborough, 25-27 June 2003, Loughborough.

SHANG, H., ANUMBA, C.J., BOUCHLAGHEM, N.M., MILES, J.C., CEN, M. and TAYLOR, M., 2003. Web-based risk assessment system for construction. In: Proceedings 9th Conference of the Chinese Automation & Computing Society, Luton.

SHELBOURN, M., AOUAD, G. and HOXLEY, M., 2003. CAL for building surveyors - a prototype application. In: Proceedings of the CIB W89 International Conference on Building Education and Research (BEAR 2003).

SHELBOURN, M., AOUAD, G. and HOXLEY, M., 2003. Computer-aided-learning for building surveyors - a prototype application. In: International Conference on Building Education and Research, Salford,UK, 9-11 April 2003.

SOUTO, A., 2003. La búsqueda de una identidad nacional. Arquitectura en Mexico, 1920-1950. In: Congreso de Investigación y Extensión del Sistema Tecnológico de Monterrey, Dirección de Investigación y Extensión, Campus Monterrey, Tecnológico de Monterrey, 2003.

SU, D. and CHEN, X., 2003. Network support for integrated design. Integrated Manufacturing Systems, 14 (6), pp. 537-546. ISSN 0957-6061

SU, D., HULL, J.B. and HOU, J., 2003. Management of networked organizations using a Web-enabled collaborative environment. In: Proceedings of the 10th ISP International Conference on Concurrent Engineering: Research and Applications, Madeira, Portugal.

SU, D., JI, S., AMIN, N. and HULL, B.N., 2003. Multi-user Internet environment for gear design optimization. Integrated Manufacturing Systems, 14 (6), pp. 498-507. ISSN 0957-6061

SU, D.Z. and QIN, D.T., 2003. Integration of numerical analysis, virtual simulation and finite element analysis for the optimum design of worm gearing. Journal of Materials Processing Technology, 138 (13), pp. 429-435. ISSN 0924-0136

SU, D.Z. and QIN, D.T., 2003. Integration of numerical analysis, virtual simulation and finite element analysis for the optimum design of worm gearing. Journal of Materials Processing Technology, 138 (13), pp. 429-435. ISSN 0924-0136

SUN, M., 2003. An integrated management system for reactive building maintenance projects. In: J. CHA, R. JARDIM-GONÇALVES and A. STEIGER-GARÇÃO, eds., Proceedings of the 10th ISPE International Conference on Concurrent Engineering: Research and Applications, Madeira, Portugal, 26-30 July 2003. Lisse, Netherlands: Swets &​ Zeitlinger, pp. 225-232. ISBN 9058096238

SUN, M., BAKIS, N. and AOUAD, G., 2003. A collaborative design appraisal system for water treatment engineering projects. Advances in Engineering Software, 34 (11-12), pp. 737-743. ISSN 0965-9978

T

TAYLOR, M., MILES, J., CEN, M., BOUCHLAGHEM, D., ANUMBA, C.J. and SHANG, H., 2003. A metaphor based 3D interface for a concurrent engineering system. In: Proceedings 4th Joint International ASCE Workshop on IT in Civil Engineering, Nashville.

TESFAGABER, G., BOUCHLAGHEM, N.M., ANUMBA, C.J., BALDWIN, A.N. and CUTTING-DECELLE, A.F., 2003. Ontology modelling of IDEF 3 process description for AEC applications interoperability. In: ASCE Construction Research Conference, Hawaii, 19-21 March 2003, Hawaii.

W

WALTHAM, A.C. and FOOKES, P.G., 2003. Engineering classification of karst ground conditions. Quarterly Journal of Engineering Geology and Hydrogeology, 36, pp. 101-118. ISSN 1470-9236

WATKINS, C. and WHITE, M., 2003. Directions in corporate real estate research. Journal of Property Investment and Finance, 21 (1), pp. 6-11.

WILLIAMS, A.A., MAHER, P. and SMITH, N.P.A., 2003. Assessment of pico hydro as an option for off-grid electrification in Kenya. Renewable Energy, 28 (9), pp. 1357-1369. ISSN 0960-1481

WILLIAMS, A.A., RODRIGUES, A., SINGH, P., NESTMANN, F. and LAI, E., 2003. Hydraulic analysis of a pump as a turbine with CFD and experimental data. In: IMechE seminar, Computational Fluid Dynamics for Fluid Machinery, London, UK, 18 November, 2003, London.

WYNN, P., 2003. The Chelmsford Gasholder Foundation failure. Historic Gas Times, 35, p. 5. ISSN 1475-617X

Y

YANG, W.X. and TSE, P.W., 2003. Development of an advanced noise reduction method for vibration analysis based on singular value decomposition. NDT AND E International, 36 (6), pp. 419-432. ISSN 0963-8695

Z

ZAINUL-ABIDIN, N., KHALFAN, M. and KASHYAP, M., 2003. Moving towards more sustainable construction. In: Proceedings of COBRA 2003 Conference, Wolverhampton.

ZAINUL-ABIDIN, N. and PASQUIRE, C.L., 2003. Moving towards sustainability through value management. In: CIB Joint International Symposium, Singapore, October 2003, Singapore.

ZORRIASSATINE, F., AL-HABAIBEH, A., NOTINI, L., SALVAN, R.M., PARKIN, R.M., JACKSON, M.R. and COY, J., 2003. An integrated sensory system for intelligent condition monitoring of mail processing machines. In: 16th International Congress and Exhibition on Condition Monitoring amd Diagnostic Engineering Management, COMADEM 2003, Vaxjo, Sweden, 27 August 2003. UNSPECIFIED. ISBN 9176363767