Items where Division is "School of Architecture, Design and the Built Environment" and Year is 2008

A

ABDELMONEM, M.G., 2008. The Cairene harah in 1800: reading domestic space as a spectrum of social spheres. In: 5th Annual Architectural Humanities Research Association (AHRA) Research Student Symposium, De Montfort University, Leicester, 3 December 2008.

ABDELMONEM, M.G., 2008. Propagation of ideologies in architectural education. In: Annual PCHE Conference, School of Education, University of Sheffield, Sheffield, 2008.

ABDULLAHI, S., BOUCHLAGHEM, D., EL-HAMALAWI, A. and YEOMANS, S., 2008. An enterprise content management approach to organisational information management for the construction industry. In: CIB Joint International Symposium 2008: Transformation Through Construction, Dubai, 15-17 November 2008, Dubai.

AHSAN, S., EL-HAMALAWI, A., BOUCHLAGHEM, D. and AHMAD, S., 2008. Supporting problem resolution on construction sites with converged multimedia, wireless & mobile technologies. In: CIB Joint International Symposium 2008: Transformation Through Construction, Dubai, 15-17 November 2008, Dubai.

AL-AZMI, A. and AL-HABAIBEH, A., 2008. The application of vibration analysis in the design of condition monitoring systems. In: Proceedings of the Fourth International Conference on Energy Research and Development, Kuwait.

AL-AZMI, A. and AL-HABAIBEH, A., 2008. The design of enhanced on-line condition monitoring systems for turning processes. International Journal of Design Engineering, 2 (1).

AL-AZMI, A.F., 2008. The design of an effective sensor fusion model for condition monitoring systems of turning processes. PhD, Nottingham Trent University.

AL-HABAIBEH, A., RADWAN, N., REDGATE, J. and LAD, M., 2008. Experimental case studies on the effect of insulation on energy conservation in buildings. In: Proceedings of the Fourth International Conference on Energy Research and Development, Kuwait.

AL-HABAIBEH, A., SU, D., MCCAGUE, J. and KNIGHT, A., 2008. An innovative approach for energy generation from waves. In: Proceedings of the Global Conference on Renewables and Energy Efficiency for Desert Regions, Jordan.

ALLIN, S., 2008. Furthering the flexibility of contents of German formal urban development plans. In: Proceedings of the UK-Ireland Planning Research Conference 2008, Belfast.

ALLIN, S., STEINEBACH, G. and GANSER, R., 2008. Employing information and communication systems in planning processes to increase efficiency in sustainable urban development. In: Local sustainable urban development in a globalized world. London: Ashgate Publishing Limited, pp. 19-32.

ARIVAZHAGAN, A., 2008. Computer aided process planning for prismatic parts: a STEP based approach. PhD, Nottingham Trent University.

ARIVAZHAGAN, A., MEHTA, N.K. and JAIN, P.K., 2008. Development of a feature recognition module for tapered and curved base features. International Journal of Advanced Manufacturing Technology, 39 (34), pp. 319-332. ISSN 0268-3768

ARTHUR, L., 2008. Designers with prizes. Grapevine, 24 (3), p. 20.

ARTHUR, L. and MARTIN, P., 2008. Visualising academia: how to make academia attractive. (A teaching case study highlighting the visual essay as a creative means of teaching academic practice). In: International Conference on Engineering and Product Design Education, Universitat Politecnica de Catalunya, Barcelona, Spain, 4-5 September 2008.

ARTHUR, L. and MARTIN, P., 2008. The visual essay [key speaker]. In: ADSHE Annual Networking Day: Reasonable Adjustments, Assessment and Academic Standards, London, 18 June 2008.

ARTHUR, L., MARTIN, P. and FREEMAN, S., 2008. The visual essay [presented as part of the Association of Dyslexia Specialists in HEs (ADSHE)]. In: British Dyslexia Association's International Conference, Harrogate, March 2008.

ARTHUR, L., MARTIN, P. and FREEMAN, S., 2008. The visual essays are a brilliant example of inclusive practice, especially for students with SpLD [key speaker]. In: ADSHE Annual Networking Day: Reasonable Adjustments, Assessment and Academic Standards, London, 18 June 2008.

ASHRAF, S., MUHAMMAD, E. and AL-HABAIBEH, A., 2008. Self-learning control systems using identification based adaptive iterative learning controller. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 222 (7), pp. 1177-1187. ISSN 0954-4062

ASNAASHARI, E., HURST, A.G. and KNIGHT, A., 2008. Logistics management in construction projects in Iran. In: Proceedings of BuHu 8th International Postgraduate Research Conference, Czech Technical University, Prague, Czech Republic, 26-27 June 2008, Prague, Czech Republic.

B

BANDYOPADHYAY, S., 2008. From another world! A possible Buyid origin of the decorated 'Mihrab' of central Oman? In: E. OLIJDAM, ed., Intercultural relations between South and Southeast Asia, studies in commemoration of E.C.L. during Caspers (1934-1966). Oxford: Archaeopress, pp. 372-382. ISBN 9780000000000

BANDYOPADHYAY, S., 2008. [Keynote speaker]. In: City Identity: an Architectural Dialogue(international conference), Muscat: Government of the Sultanate of Oman, 11-13 January 2008, Muscat.

BANDYOPADHYAY, S. and JACKSON, I., 2008. Nek Chand's rock garden and Le Corbusier in Chandigarh: reconsidering the primitive. South African Journal of Art History, 22 (2), pp. 115-126. ISSN 0258-3542

BISHOP, J., BOUCHLAGHEM, D., GLASS, J. and MATSUMOTO, I., 2008. Ensuring the effectiveness of a knowledge management initiative. Journal of Knowledge Management, 12 (4). ISSN 1367-3270

BISHOP, J., BOUCHLAGHEM, D., GLASS, J. and MATSUMOTO, I., 2008. Identifying and implementing management best practice for communities of practice. Journal of Architecture Engineering and Design Management, 4 (34), pp. 160-175.

BREEDON, P., 2008. Robot design & demonstration. In: Interactive Technologies: Education, Disabilities and Rehabilitation, Nottingham Trent University, 12 November 2008, Nottingham.

BREEDON, P.J., BRIGGS-GOODE, A. and KETTLEY, S., 2008. Leading technical textiles research: integration of a stretch sensor into woven and knitted structures, at 'Another side of fashion': the fashion for smart materials, Science Museum, London, 19 September 2008. .

BREEDON, P.J., BRIGGS-GOODE, A., KETTLEY, S. and SPARKES, B., 2008. Design innovation: sensors and fabrication. In: 86th Textile Institute World Conference, Hong Kong, 18-21 November 2008, Hong Kong.

BREEDON, P.J., BRIGGS-GOODE, A., KETTLEY, S. and SPARKES, B., 2008. Textiles, shape and sensor: integration of textile design and technology. In: 2nd International Scientific Conference, 'Textiles of the Future', Kortrijk, Belgium, 13-15 November 2008, Kortrijk, Belgium.

BREEDON, P.J., LYCOURIS, S., BILLING, J. and CORDINGLEY, T., 2008. 4D object exhibit, MORE is MORE 2 - 4D product design for the everyday. DANA CENTRE, Science Museum, London, 6 May 2008. .

BREEDON, P.J., LYCOURIS, S., BILLING, J. and CORDINGLEY, T., 2008. Streetwise robots. In: Science Museum, London, 6 May 2008, London.

BREEDON, P.J., LYCOURIS, S., BILLING, J. and CORDINGLEY, T., 2008. Streetwise robots. Event at the Science Museum, London, 6 May 2008. .

BULL, R., PETTS, J. and EVANS, J., 2008. Social learning from public engagement: dreaming the impossible? Journal of Environmental Planning and Management, 51 (5), pp. 701-716. ISSN 0964-0568

BUSWELL, R.A., THORPE, A., SOAR, R. and GIBB, A.G.F., 2008. Design, data and process issues for mega-scale rapid manufacturing machines used for construction. Automation in Construction, 17 (8), pp. 923-929. ISSN 0926-5805

C

CARFRAE, J., DE, W., GOODHEW, S., WALKER, P. and LITTLEWOOD, J.R., 2008. Totnes Eco House: interaction between design and in-situ monitoring. In: Proceedings of the Passive Low Energy Architecture Conference: Towards Zero Energy Building, Dublin, Ireland, 22-24 October 2008, Dublin, Ireland.

CARRILLO, P.M., ROBINSON, H., FOALE, P., ANUMBA, C. and BOUCHLAGHEM, N.M., 2008. Participation, barriers and opportunities in PFI: the United Kingdom experience. ASCE Journal of Management in Engineering, 24 (3), pp. 138-145. ISSN 0742-597X

CASAMAYOR, J., 2008. Web-based collaboration for furniture design: survey and structure of a collaborative working environment. In: DET 2008 Conference, 2008.

COOPER, T., 2008. Environmental praxis - worthy of praise. In: EcoTHEE-08: Ecological Theology and Environmental Ethics Conference, Orthodox Academy of Crete, Chania, Crete, Greece, June 2-6 2008, Chania.

COOPER, T., 2008. Goods, wellbeing and indicators. In: Involving Citizens/Communities in Measuring and Fostering Well-Being and Progress: Towards New Concepts and Tools, Council of Europe Seminar, Palais de l'Europe, Strasbourg, France, 27-28 November 2008, Strasbourg.

COOPER, T., 2008. No need to edit? Is faith in consumer sovereignty justified? In: O. COUNCIL, ed., Rethinking consumer behaviour for the well-being of all: reflections on individual consumer responsibility. Paris: Council of Europe, pp. 33-39. ISBN 9.79E+12

COOPER, T., 2008. Produire ou ne pas produire? Est-il justifié de croire en la souveraineté du consommateur? L'Economie Politique (39), pp. 32-42. ISSN 1293-6146

COOPER, T., 2008. Transforming consumption by rejecting the unacceptable. In: O. COUNCIL, ed., Rethinking consumer behaviour for the well-being of all: reflections on individual consumer responsibility. Paris: Council of Europe, pp. 79-86. ISBN 9.79E+12

COOPER, T., 2008. Value, depreciation and the maintenance of wealth. In: O. COUNCIL, ed., Rethinking consumer behaviour for the well-being of all: reflections on individual consumer responsibility. Paris: Council of Europe, pp. 63-69. ISBN 9.79E+12

COURT, P., PASQUIRE, C.L. and GIBB, A.G.F., 2008. Modular assembly in healthcare construction. In: P. TZORTZOPOLOUS and M. KAGIOGLOU, eds., IGLC 16 Proceedings. UNSPECIFIED, pp. 521-531. ISBN 9781905732456

CRISP, A.R. and DALE, J., 2008. Post modernity: design education culture. In: A. CLARKE, M. EVATT, P. HOGARTH, J. LLOVERAS and L. PONS, eds., New Perspectives in Design Education. Barcelona: Artyplan Global Printers, pp. 37-42. ISBN 1904670032

CRISP, A.R., DALE, J. and MORLEDGE, R., 2008. Barriers to the adoption of innovative products: a pedagogically driven initial review. In: Innovation in Architecture, Engineering and Construction, Antalya, Turkey.

D

DE, W., GRIFFITHS, R. and GOODHEW, S., 2008. Evolution and validation of a thermal probe model. Journal of Building Performance Simulation. ISSN 1940-1493 (print); 1940-1507 (online)

DE, W., GRIFFITHS, R. and GOODHEW, S., 2008. Validation of data analysis routines for a thermal probe apparatus using numerical data sets. Building Simulation, 1 (1), pp. 36-46.

DE, W., MURRAY, P.E., GOODHEW, S. and TURPIN-BROOKS, S., 2008. Developments in the curriculum of environmental building at the University of Plymouth. In: BEAR 2008: International Conference in Building Education and Research, Kandalama, Sri Lanka, 11-15 February 2008, Kandalama, Sri Lanka.

DOWNES, T., 2008. Developing communities of practice to enhance student learning [short paper]. In: 10th Annual Learning and Teaching Conference, Nottingham Trent University, 3 April 2008, Nottingham.

E

ECCLES, T., 2008. Professional identity in high modernity: the English building industry. In: Refleksyjny Aktor a Zmiany Spoleczne i Kulturowe Conference, Instytut Socjologii, Uniwersytet Kardynała Stefana Wyszyńskiego w Warszawie, Warsaw, Poland, 29 October 2008, Warsaw.

ERDOGAN, B., ANUMBA, C.J., BOUCHLAGHEM, D. and NIELSON, Y., 2008. Collaboration environments for construction: implementation case studies. ASCE Journal of Management in Engineering, 24 (4), pp. 234-244. ISSN 0742-597X

ERDOGAN, B., ANUMBA, C.J., BOUCHLAGHEM, D. and NIELSON, Y., 2008. ICE: a prototype system for implementing collaboration environments in construction. In: 5th International Conference on Innovation in Architecture, Engineering and Construction, Antalya, Turkey, 23-25 June 2008, Antalya, Turkey.

ERDOGAN, B., ANUMBA, C.J., NIELSON, Y. and BOUCHLAGHEM, D., 2008. Change management in the implementation of collaboration environments. In: CIB Joint International Symposium 2008: Transformation Through Construction, Dubai, 15-17 November 2008, Dubai.

EVANS, R., FROST, M., DIXON, N. and STONECLIFFE-JONES, M., 2008. The response of ground penetrating radar (GPR) to changes in the temperature and moisture condition of pavement materials. In: E. ELLIS, H.S. YU, G. MCDOWELL, A. DAWSON and N. THOM, eds., Proceedings of the 1st International Conference on Transportation Geotechnics. London: Taylor & Francis, pp. 713-718. ISBN 9780415475907

EVANS, R., FROST, M., STONECLIFFE-JONES, M. and DIXON, N., 2008. A review of pavement assessment using ground penetrating radar (GPR). In: Proceedings of the 12th International Conference on Ground Penetrating Radar, Birmingham.

F

FISHER, T., COOPER, T., WOODWARD, S., HILLER, A. and GOWOREK, H., 2008. Public understanding of sustainable clothing: a report to the Department for Environment, Food and Rural Affairs. London: Department for Environment, Food and Rural Affairs.

FISHER, T., COOPER, T., WOODWARD, S., HILLER, A. and GOWOREK, H., 2008. The UK public's understanding of sustainable clothing: habits and knowledge. In: International Seminar on Innovations in Textile and IT Industries, Government College of Engineering and Textile Technology, Serampore, West Bengal, India, 2-3 December 2008, Serampore, West Bengal.

FORTUNE, C.C. and MOOHAN, J.A.J., 2008. International variations in new housing supply. International Journal of Housing Markets and Analysis, 1 (4), pp. 379-392. ISSN 1753-8270

G

GARNETT, K., COOPER, T., HEATH, M. and CARTWRIGHT, G., 2008. Modelling the expert-public interface in municipal waste management decision making. In: Creative Management: Gaining the Trust of People, Chartered Institution of Wastes Management 2008 Conference and Symposium on Waste Treatment Technologies, Paignton, June 10-13 2008, Paignton.

GARNETT, K., COOPER, T., HEATH, M. and CARTWRIGHT, G., 2008. Public involvement in local waste management strategy development and facility planning: exploring opinions from stakeholder groups. In: 23rd International Conference on Solid Waste Technology and Management, Widener University, Pennsylvania, United States, 30 March - 2 April 2008, Pennsylvania.

GODBOLD, O., KANG, J., BUSWELL, R.A. and SOAR, R., 2008. Fabrication of acoustic absorbing topologies using rapid prototyping. Canadian Acoustics, 36 (3), pp. 144-145. ISSN 0711-6659

GREENWOOD, J.R., ATCHISON, P. and CORBET, S., 2008. Applications and risks associated with a low cost flood defence barrier. Flood Recovery, Innovation and Response, 118, pp. 165-173. ISSN 1746-448X

GREENWOOD, J.R., ATCHISON, P. and CORBET, S., 2008. Demonstration trials of a low cost self erecting flood barrier. In: Proceedings of the 4th European Conference on Geosynthetics (EuroGeo4), Edinburgh, 7-10 September 2008, Edinburgh.

H

HIELSCHER, S., FISHER, T. and COOPER, T., 2008. The return of the beehives, Brylcreem and botanical! An historical review of hair care practices with a view to opportunities for sustainable design. In: UNDISCIPLINED! Rigour in Emerging Design Disciplines and Professions, Design Research Society 2008 Conference, Sheffield, 16-19 July 2008, Sheffield.

HOXLEY, M., 2008. Questionnaire design and factor analysis. In: A. KNIGHT and L. RUDDOCK, eds., Advanced research methods in the built environment. Chichester: Wiley-Blackwell, pp. 122-134.

HU, Y., LI, B., SU, D. and HU, H., 2008. Dynamic design for a novel parallel kinematic machine with passive linkage. Key Engineering Materials, 364366, pp. 1037-1042. ISSN 1013-9826

HUGHES, A., 2008. Will there be conflict? Identity and values tensions in Transylvania's Saxon villages. Europolis, Journal of Political Analysis and Theory (4), pp. 309-328. ISSN 1582-4969

I

IANAKIEV, A., 2008. Design features aimed at reducing stresses and deformations in plastic water tanks [invited paper]. In: International Rotational Moulding Conference ARMO 08, Belfast, 2008, Belfast.

IANAKIEV, A., 2008. Modelling of complex structures using superelements. International Journal of Design Engineering, 1 (4), pp. 396-411. ISSN 1751-5874

ISSA, H.K. and MOHAMMAD, F.A., 2008. Investigating the optimum design of steel portal frames using genetic algorithms. In: Built and Human Environment (BuHu) 8th International Postgraduate Research Conference, The Czech Technical University of Prague (CVUT), Prague, Czech Republic, June 26-27 2008, Prague, Czech Republic.

K

KE, Q., 2008. Are state-owned companies underperforming? A case study of Chinese listed property companies. Journal of Real Estate Literature, 16 (2), pp. 183-200. ISSN 0927-7544

KE, Q., ISAAC, D. and DALTON, P., 2008. The determinants of business performance of estate agency in England and Wales. Property Management, 26 (4), pp. 255-272. ISSN 0263-7472

KEATS, B., KNIGHT, A.D. and HOXLEY, M., 2008. A conceptual analysis of social housing: camouflaging the divisions. In: COBRA 2008, RICS Construction and Building Research Conference, Dublin Institute of Technology, Dublin, Ireland, 4-5 September 2008, Dublin, Ireland.

KEATS, R., KNIGHT, A. and HOXLEY, M., 2008. A conceptual analysis of social housing: camouflaging the divisions. In: Proceedings of the RICS COBRA Conference, Dublin, Eire.

KETTLEY, S., 2008. Crafting the wearable computer [article to accompany the exhibition, Social Fabrics, Leonardo Educational Forum Exhibition, Dallas, Texas, 2008]. Intelligent Agent, 8 (1).

KETTLEY, S., 2008. Parallels in the evolution of craft and authenticity. In: Proceedings of Crafticulation & Education: International Conference of Craft Science and Craft Education.

KETTLEY, S., 2008. Peacocks and wallflowers: the enactment of social visibility in wearables. Journal of Visual Communication, 7 (3).

KHADOUR, L., RAMSAY-DAWBER, P. and MORLEDGE, R., 2008. A survey of key findings on the implementation of TQEM in the UK construction. In: Proceedings of COBRA Conference, Dublin.

KHALFAN, M.M.A., KASHYAP, M., ABBOT, C. and LI, X., 2008. Knowledge management in construction supply chain integration. International Journal of Networking and Virtual Organisations (IJNVO).

KHALFAN, M.M.A., MCDERMOTT, P., LI, X. and KASHYAP, M., 2008. Developing innovative procurement strategies to integrate suppliers and manufacturers within construction industry. International Journal of Value Chain Management (IJVCM).

KING, A.P., 2008. Using software to analyse qualitative data. In: A.D. KNIGHT and L. RUDDOCK, eds., Advanced research methods in the built environment. Oxford: Wiley Blackwell.

KNIGHT, A.D. and RUDDOCK, L., 2008. Advanced research methods in the built environment. Oxford: Wiley Blackwell. ISBN 9780000000000

KNIGHT, A.D. and TURNBULL, N., 2008. Epistemology. In: A.D. KNIGHT and L. RUDDOCK, eds., Advanced research methods in the built environment. Oxford: Wiley Blackwell. ISBN 9780000000000

KOSEOGLU, O. and BOUCHLAGHEM, N.M., 2008. Mobile visualisation for on-site collaboration. International Journal of Interactive Mobile Technologies, 2 (4), pp. 43-53. ISSN 1865-7923

L

LAI, L.C.W., NG, F.W.N. and YUNG, P., 2008. The Coase Theorem and a Coasian construction economics and management research agenda. Construction Management and Economics, 26 (1), pp. 29-46. ISSN 0144-6193

LI, D. and SOAR, R., 2008. Plastic flow and work hardening of Al alloy matrices during ultrasonic consolidation fibre embedding process. Materials Science and Engineering: A, 498 (12), pp. 421-429. ISSN 0921-5093

LI, J. and SU, D., 2008. Support modules and system structure of Web-enabled collaborative environment for design and manufacture. International Journal of Production Research, 9 (49), pp. 2397-2412.

LOVE, K., 2008. Emanuel Levinas and the question of theophany. Angelaki, 12 (3), pp. 65-79.

M

MANSFIELD, J.R., 2008. A critique of the evolving funding process for the care of Anglican medieval cathedrals. Structural Survey, 26 (3), pp. 199-209.

MANSFIELD, J.R., 2008. The ethics of conservation: some dilemmas in cultural built heritage projects in England. Construction and Architectural Management Engineering, 15 (3), pp. 270-281.

MANSFIELD, J.R. and PINDER, J., 2008. 'Economic' and 'functional' obsolescence: their characteristics and impacts on valuation practice. Property Management, 26 (3), pp. 199-206.

MARCHAND, A., WALKER, S. and COOPER, T., 2008. Beyond abundance: motivations and perceived benefits underlying choices for more sustainable lifestyles. In: Changing the Change: Design Visions, Proposals and Tools Research Conference, Turin, Italy, 10-12 July 2008.

MARTIN, P. and ARTHUR, L., 2008. Visualising academia: how to make academia sexy. A case study highlighting the development of the academic visual essay; for nurturing a critical understanding of a topic, linking images and text. In: From Power to Empowerment: Examining Critical Literacy in Visual Culture, College of Visual Arts and Design, The University of North Texas, Texas, USA, 6- 7 June 2008.

MARTIN, P. and ARTHUR, L., 2008. Why students should be encouraged to debate. In: International Conference on Engineering and Product Design Education, Universitat Politecnica de Catalunya, Barcelona, Spain, 4-5 September 2008.

MCGILLIGAN, C., DE WILDE, P. and GOODHEW, S., 2008. An assessment of the potential returns of energy certificates for the UK household sector. Journal of Financial Property and Construction, 13 (3).

MENDOZA, M. and CHILTON, J., 2008. Learning from the shell builder: Felix Candela. In: New Materials and Technologies, New Designs and Innovations - a Sustainable Approach to Architectural and Structural Design, Acapulco, Mexico.

MENG, X. and SUN, M., 2008. Construction tender evaluation practice in China. Chartered Institute of Building: Construction Information Quarterly, 10 (4), pp. 157-163. ISSN 1469-4891

MOLLAERT, M. and CHILTON, J.C., 2008. Tensioned membrane construction [special issue]. Brentwood: Multi-Science Publishing Co. Ltd..

MORLEDGE, R., 2008. A review of the value of the main contractor. In: COBRA 2008, RICS Construction and Building Research Conference, Dublin Institute of Technology, Dublin, Ireland, 4-5 September 2008, Dublin, Eire.

MOU, C., SAFFARI, P., LI, D., ZHOU, K., ZHANG, L., SOAR, R. and BENNION, I., 2008. Embedded fibre Bragg grating array sensors in aluminium alloy matrix by ultrasonic consolidation. In: D. SAMPSON, S. COLLINS, K. OH and R. YAMAUCHI, eds., Proceedings of SPIE Vol. 7004. Bellingham, Wash.: SPIE. ISBN 9780819472045

MUSTAPA, F.D. and PASQUIRE, C.L., 2008. Immigrant construction workers' spending and remittance pattern: the Malaysian perspective. In: Transformation Through Construction: Joint 2008 CIB W0651/W055, Dubai, 15 November 2008. UNSPECIFIED, pp. 38-39. ISBN 9.78E+12

N

NORRIS, J.E. and GREENWOOD, J.R., 2008. An introduction to types of vegetated slopes. In: J.E. NORRIS, A. STOKES, S.B. MICKOVSKI, L.H. CAMMERAAT, B. VAN, B. NICOLL and A. ACHIM, eds., Slope stability and erosion control: ecotechnological solutions. Dordrecht: Springer, pp. 9-16. ISBN 9.78E+12

NORRIS, J.E., GREENWOOD, J.R., ACHIM, A., GARDINER, B.A., NICOLL, B.C., CAMMERAAT, E. and MICKOVSKI, S.B., 2008. Hazard assessment of vegetated slopes. In: J.E. NORRIS, A. STOKES, S.B. MICKOVSKI, L.H. CAMMERAAT, B. VAN, B. NICOLL and A. ACHIM, eds., Slope stability and erosion control: ecotechnological solutions. Dordrecht: Springer, pp. 119-166. ISBN 9.78E+12

NOWBATI, B., HASSAN, T.M. and PASQUIRE, C.L., 2008. Knowledge management in organisations: a constructive case study. International Journal of Knowledge, Culture and Change Management, 8 (6), pp. 33-40. ISSN 1447-9524

P

PASTOR, M., 2008. Design Studio 2005-06. Madrid: Universidad Camilo Jose Cela. ISBN 9788495891235

PASTOR, M., 2008. Introducción al proyecto. In: M. PASTOR, ed., Arquitectura A07A08. Madrid: Universidad Camilo Jose Cela, pp. 7-8. ISBN 9788495891266

PILKINGTON, B., GRIFFITHS, R., GOODHEW, S. and DE, W., 2008. Thermal probe technology for buildings: the transition from laboratory to field measurements. Journal of Architectural Engineering, 14 (4), pp. 111-118.

Q

QUATTRONE, G., 2008. Glenn Murcutt: the pioneer of critical regionalism in Australian contemporary architecture. Jamini: an International Arts Quarterly, 4 (2), pp. 35-39. ISSN 1728-5747

QUATTRONE, G., 2008. Il valore del metaprogetto in esperienze di riqualificazione dell'esistente con approcci di 'Regionalismo Critico'. In: IV Forum Internazionale 'Le Città del Mediterraneo', Università degli Studi Mediterranea di Reggio Calabria, Facoltà di Architettura, Reggio Calabria, 27-29 May 2008, Reggio Calabria.

QUATTRONE, G., 2008. Matrixes of tradition in the work of Renzo Piano. Interrogating Tradition Epistemologies, Fundamentalisms, Regeneration, and Practices. ISSN 1050-2092

QUATTRONE, G., 2008. The relationship between dwelling patterns and appropriate technologies for regionalist contemporary architecture. From contemporary Australian design experience to the proposal for a metadesign tool in the Mediterranean area. PhD, Nottingham Trent University.

R

RAHMAN, M.M. and HEWITT, N., 2008. Area 8: A1: A421 Bedford Bypass - pavement investigation and maintenance proposals [client project report]. Highways Agency's Area 8 Managing Agent.

RAHMAN, M.M. and HEWITT, N., 2008. Area 8: A421 Bedford Bypass - pavement investigation and maintenance proposals [client project report]. Highways Agency's Area 8 Managing Agent.

REID, A. and ASHLEY, C.Z., 2008. A context for the Luzira Head. Antiquity, 82 (315), pp. 99-112. ISSN 0003-598X

S

SALVATIERRA-GARRIDO, J. and PASQUIRE, C.L., 2008. Social housing in Chile: opportunities to apply value concept in early stage of projects. In: 24th Annual Conference of the Association of Researchers in Construction Management, Cardiff, September 2008. UNSPECIFIED, pp. 371-380. ISBN 9780955239014

SHAW, N. and BOUCHLAGHEM, D., 2008. Challenges, opportunities and recommendations for collaborative product development in construction: a UK construction strategic alliance partnership perspective. In: Proceedings of the joint CIB W096 and CIB TG49 Conference, São Paulo, Brazil.

SHELBOURN, M., KERR, D. and BOUCHLAGHEM, D., 2008. Understanding the softer side of collaborative working. In: Joint International Conference in Transformation through Construction WO55 (Building Economics) and WO65 (Oorganisation and Management of Construction), 2008, Dubai.

SHERIFF, A., BOUCHLAGHEM, D. and YEOMANS, S.G., 2008. An investigation into the impact of 4D modelling on construction project planning. In: 5th International Conference on Innovation in Architecture, Engineering and Construction, Antalya, Turkey, 23-25 June 2008, Antalya, Turkey.

SOUTO, A., 2008. La protección del Patrimonio en México DF. La conservación de la identidad en el siglo XX. In: Actas del XIII Congreso del Comité Español de Historia del Arte, Universitat de les Illes Balears, Palma de Mallorca, 2008.

STOKES, A., NORRIS, J.E. and GREENWOOD, J.R., 2008. Introduction to ecotechnological solutions. In: J.E. NORRIS, A. STOKES, S.B. MICKOVSKI, L.H. CAMMERAAT, B. VAN, B. NICOLL and A. ACHIM, eds., Slope stability and erosion control: ecotechnological solutions. Dordrecht: Springer, pp. 1-8. ISBN 9.78E+12

SU, D., 2008. Teaching and research in engineering/product design [keynote speech]. In: National Symposium on Higher Education in Mechanical Design, Harbin, China, 22-24 July 2008, Harbin, China.

SU, D. and PENG, W., 2008. Optimum design of worm gears with multiple computer aided techniques. In: H. MURAKAVA, ed., Proceedings of International Conference on Computational and Experimental Engineering and Sciences (ICCES'08). UNSPECIFIED, pp. 575-581. ISBN 0971788057; 9780971788053

SU, D., XIONG, Y., ZHENG, Y. and JI, S., 2008. A framework for collaborative working environment. International Journal of Production Research, 9 (49), pp. 2363-2381.

SU, D. and ZHENG, Y., 2008. Utilization of the collaborative working environment for online computer aided mechanical design [keynote speech]. In: 13th International Conference on Machine Design and Production (UMTIK 2008), Istanbul, Turkey, 3-5 September 2008, Istanbul.

SUN, M., 2008. A benefit measurement framework for an online contract change management system. Tsinghua Science and Technology, 13 (z1), pp. 205-210. ISSN 1007-0214

T

TETLOW, D., 2008. Heat transfer enhancement in integrated phase change drywall system. PhD, Nottingham Trent University.

U

UDEJA, C.E., KAMARA, J.M., CARRILLO, P.M., ANUMBA, C.J., BOUCHLAGHEM, N.M. and TAN, H.C., 2008. A web-based prototype for live capture and reuse of construction project knowledge. Automation in Construction, 17 (7), pp. 839-851.

Y

YEBOAH, S.K. and DARKWA, K., 2008. Review of the sustainable energy resource potential of Ghana. UNSPECIFIED.

YU, X., 2008. Development of an online collaborative working environment for design and manufacturing. PhD, Nottingham Trent University.

YUNG, P., 2008. Multi-level contractual links among project teams: a case study. Construction Information Quarterly, 10 (4), pp. 171-175. ISSN 1469-4891

YUNG, P., 2008. The effects of institutional reforms on China's construction industry. , pp. 57-61. ISSN 0972-5334

YUNG, P. and LAI, L.C.W., 2008. Supervising for quality: an empirical examination of institutional arrangements in China's construction industry. Construction Management and Economics, 26 (7), pp. 723-737. ISSN 0144-6193

Z

ZHENG, Y., ARTHUR, L., LI, C. and SU, D., 2008. Collaborative design within an agent-based mobile environment. In: 8th International Conference on Frontiers of Design and Manufacturing, Tianjin, China, 23-26 September 2008.