NTU > IRep

IRep

Items where Division is "School of Architecture, Design and the Built Environment" and Year is 2016

Group by: Creators | Item Type | No Grouping

Number of items: 146.

Journal article

ABDELMONEM, M.G., 2016. From propagation to negotiation of ideologies in the architectural design studio: critical insights in student-centred strategies for interactive learning. Journal of Design Research, 14 (1). ISSN 1748-3050

ABDELMONEM, M.G., 2016. The abject dream of new capital: capitalist urbanism, architecture and endangered liveability of the Middle East’s modern cities. Open House International, 41 (2), pp. 38-46. ISSN 0168-2601

ABDELMONEM, M.G., 2016. The modern ordinary: changing culture of urban living in Egypt's traditional quarters at the turn of the twentieth century. Middle Eastern Studies, 52 (5), pp. 825-844. ISSN 0026-3206

ABIGO, A., GIDADO, K., GILCHRIST, P. and ABOAGYE-NIMO, E., 2016. 'Nothing can be done to make our markets clean': a qualitative study of attitudes of the African marketplace users toward waste. Journal of Solid Waste Technology and Management, pp. 44-57. ISSN 1088-1697

AL-SHAMMARI, E.T., MOHAMMADI, K., KEIVANI, A., AB HAMID, S.H., AKIB, S., SHAMSHIRBAND, S. and PETKOVIĆ, D., 2016. Prediction of daily dewpoint temperature using a model combining the support vector machine with firefly algorithm. Journal of Irrigation and Drainage Engineering, 142 (5): 04016013. ISSN 0733-9437

ALOMAR, M.K., ALSAADI, M.A., HAYYAN, M., AKIB, S. and HASHIM, M.A., 2016. Functionalization of CNTs surface with phosphonuim based deep eutectic solvents for arsenic removal from water. Applied Surface Science, 389, pp. 216-226. ISSN 0169-4332

ALOMAR, M.K., ALSAADI, M.A., HAYYAN, M., AKIB, S., IBRAHIM, R.K. and HASHIM, M.A., 2016. Lead removal from water by choline chloride based deep eutectic solvents functionalized carbon nanotubes. Journal of Molecular Liquids, 222, pp. 883-894. ISSN 0167-7322

ALOMAR, M.K., HAYYAN, M., ALSAADI, M.A., AKIB, S., HAYYAN, A. and HASHIM, M.A., 2016. Glycerol-based deep eutectic solvents: physical properties. Journal of Molecular Liquids, 215, pp. 98-103. ISSN 0167-7322

ALKHADAFE, H., AL-HABAIBEH, A. and LOTFI, A., 2016. Condition monitoring of helical gears using automated selection of features and sensors. Measurement, 93, pp. 164-177. ISSN 0263-2241

AMIRMOJAHEDI, M., AKIB, S., BASSER, H. and OOI, C.H.R., 2016. Methods for monitoring scour from large-diameter heat probe tests. Structural Health Monitoring: An International Journal, 15 (1), pp. 38-49. ISSN 1475-9217

ANTONITES, A. and ASHLEY, C.Z., 2016. The mobilities turn and archaeology: new perspectives on socio-political complexity in thirteenth-century northern South Africa. Azania: Archaeological Research in Africa, 51 (4), pp. 469-488. ISSN 0067-270X

ASRAR, M., AL-HABAIBEH, A. and HOUDA, M., 2016. Innovative algorithm to evaluate the capabilities of visual, near infrared, and infrared technologies for the detection of veins for intravenous cannulation. Applied Optics, 55 (34), D67-D75. ISSN 0003-6935

ATHRESH, A.P., AL-HABAIBEH, A. and PARKER, K., 2016. The design and evaluation of an open loop ground source heat pump operating in an ochre-rich coal mine water environment. International Journal of Coal Geology, 164, pp. 69-76. ISSN 0166-5162

BABAEE, F., FAYAZ, R. and SARSHAR, M., 2016. The optimum design of sunspaces in apartment blocks in cold climate. Architectural Science Review, 59 (3), pp. 239-253. ISSN 0003-8628

BYROM, B., BREEDON, P. and MUEHLHAUSEN, W., 2016. PRM4 – a review evaluating the validity of motion-based gaming platforms to measure clinical outcomes in clinical research. Value in Health, 19 (7), A357-A358. ISSN 1098-3015

CHALAL, M.L., MEDJDOUB, B., WHITE, M. and SHRAHILY, R., 2016. Energy planning and forecasting approaches for supporting physical improvement strategies in the building sector: a review. Renewable & Sustainable Energy Reviews, 64, pp. 761-776. ISSN 1364-0321

DING, L.Y., ZHONG, B.T., WU, S. and LUO, H.B., 2016. Construction risk knowledge management in BIM using ontology and semantic web technology. Safety Science, 87, pp. 202-213. ISSN 0925-7535

DISKIN, S. and ASHLEY, C., 2016. Characterisation of archaeological ceramics from the Khwebe Hills of northern Botswana. Journal of Archaeological Science: Reports, 6, pp. 574-583. ISSN 2352-409X

GHAREHBAGHI, K. and SAGOO, A., 2016. Reducing deterioration and corrosion of reinforcements in transportation structures. Journal of Civil Engineering and Environmental Technology, 3 (1), pp. 19-22.

GOLAB, M.R., BREEDON, P.J. and VLOEBERGHS, M., 2016. A wearable headset for monitoring electromyography responses within spinal surgery. European Spine Journal, 25 (10), pp. 3214-3219. ISSN 0940-6719

IRHOMA, A., SU, D. and HIGGINSON, M., 2016. Analysis and evaluation of the environmental impacts of upstream petroleum operations. International Journal of Manufacturing Technology and Management, 30 (1/2), pp. 116-142. ISSN 1368-2148

KAMAL, K., MATHAVAN, S., ZAFAR, T., MOAZZAM, I., ALI, A., AHMAD, S.U. and RAHMAN, M., 2016. Performance assessment of Kinect as a sensor for pothole imaging and metrology. International Journal of Pavement Engineering. ISSN 1029-8436

KETTLEY, S., 2016. 'You've got to keep looking, looking, looking': craft thinking and authenticity. Craft Research, 7 (2), pp. 165-185. ISSN 2040-4689

KIAN MANESH RAD, E., SUN, M. and BOSCHÉ, F., 2016. A consistency-checking consensus-building method to assess complexity of energy megaprojects. Procedia - Social and Behavioral Sciences, 226, pp. 43-50. ISSN 1877-0428

KROMANIS, R. and KRIPAKARAN, P., 2016. SHM of bridges: characterising thermal response and detecting anomaly events using a temperature-based measurement interpretation approach. Journal of Civil Structural Health Monitoring, 6 (2), pp. 237-254. ISSN 2190-5452

KROMANIS, R., KRIPAKARAN, P. and HARVEY, B., 2016. Long-term structural health monitoring of the Cleddau bridge: evaluation of quasi-static temperature effects on bearing movements. Structure and Infrastructure Engineering, 12 (10), pp. 1342-1355. ISSN 1573-2479

LAURENTI, R., SINGH, J., SINHA, R., POTTING, J. and FROSTELL, B., 2016. Unintended environmental consequences of improvement actions: a qualitative analysis of systems' structure and behavior. Systems Research and Behavioral Science, 33 (3), pp. 381-399. ISSN 1092-7026

LAURENTI, R., SINHA, R., SINGH, J. and FROSTELL, B., 2016. Towards addressing unintended environmental consequences: a planning framework. Sustainable Development, 24 (1), pp. 1-17. ISSN 0968-0802

MASNAN, S.E.F., ZULKIFLI, A.Z., AZMI, N.M., AKIB, S.M., RAZAK, H.A., AROF, H. and HARUN, S.W., 2016. Steel beam compressive strain sensor using single-mode-multimode-single-mode fiber structure. IEEE Photonics Journal, 8 (1): 6801006. ISSN 1943-0655

MATHAVAN, S., JACKSON, M.R. and PARKIN, R.M., 2016. Ball positioning in robotic billiards: a nonprehensile manipulation-based solution. IEEE/ASME Transactions on Mechatronics, 21 (1), pp. 184-195. ISSN 1083-4435

MATHAVAN, S., KUMAR, A., KAMAL, K., NIEMINEN, M., SHAH, H. and RAHMAN, M., 2016. Fast segmentation of industrial quality pavement images using Laws texture energy measures and k-means clustering. Journal of Electronic Imaging, 25 (5), 053010. ISSN 1017-9909

MOHAMED, A.A.K., ABDELMONEM, M.G. and SELIM, G., 2016. Understanding walkability in the Libyan urban space: policies, perceptions and smart design for sustainable Tripoli. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 10 (12), pp. 1624-1632.

MOHAMMAD, F.A. and SEYAN, D.A., 2016. Optimum design of reinforced concrete rectangular columns subjected to axial compression and biaxial bending moments. Athens Journal of Technology & Engineering, 3 (2). ISSN 2241-8237

MURTAGH, F., PIANOSI, M. and BULL, R., 2016. Semantic mapping of discourse and activity, using Habermas’s theory of communicative action to analyze process. Quality & Quantity: International Journal of Methodology, 50 (4), pp. 1675-1694. ISSN 0033-5177

NESENSOHN, C., BRYDE, D. and PASQUIRE, C., 2016. A measurement model for lean construction maturity. Lean Construction Journal, 01-09. ISSN 1555-1369

NIETO, J.E., MOYANO, J.J., RICO DELGADO, F. and ANTÓN, D., 2016. Management of built heritage via HBIM Project: a case of study of flooring and tiling. Virtual Archaeology Review, 7 (14), pp. 1-12. ISSN 1989-9947

PASTOR, M., 2016. Against the ecological prejudice: the specific experience of the built landscape. REIA (Revista Europea de Investigación en Arquitectura) (5), pp. 131-151. ISSN 2340–9851

PASTOR, M., 2016. Between utopia and construction: a research on the work of Julio Lafuente. Rita_ (6), pp. 78-85. ISSN 2340-9711

PASTOR, M., 2016. Save Tor di Valle! Structural poetic of the stands of the Tor Di Valle hippodrome. The unknown masterpiece of a Spanish Architect in Rome. En Blanco. Revista de Arquitectura, 8 (20), pp. 50-58. ISSN 1888-5616

PENG, W. and SU, D., 2016. Internet-based remote monitoring system of thermo-electric-generations with mobile communication technology. International Journal of Materials and Product Technology, 53 (2), p. 154. ISSN 0268-1900

PIRI, J., MOHAMMADI, K., SHAMSHIRBAND, S. and AKIB, S., 2016. Assessing the suitability of hybridizing the Cuckoo optimization algorithm with ANN and ANFIS techniques to predict daily evaporation. Environmental Earth Sciences, 75 (3): 246. ISSN 1866-6280

SAAD, A., SU, D., MARSH, P. and WU, Z., 2016. National Environmental Factors for Implementing Total Quality Environmental Management in the Libyan Food Industry. British Journal of Economics, Management & Trade, 11 (4), p. 23182. ISSN 2278-098X

SHAMSHIRBAND, S., AMIRMOJAHEDI, M., GOCIĆ, M., AKIB, S., PETKOVIĆ, D., PIRI, J. and TRAJKOVIC, S., 2016. Estimation of reference evapotranspiration using neural networks and cuckoo search algorithm. Journal of Irrigation and Drainage Engineering, 142 (2): 04015044. ISSN 0733-9437

SHAO, Y., SU, D., AL-HABAIBEH, A. and YU, W., 2016. A new fault diagnosis algorithm for helical gears rotating at low speed using an optical encoder. Measurement, 93, pp. 449-459. ISSN 0263-2241

SHIN, H.D. and BHAMRA, T., 2016. Design for sustainable behaviour: a case study of using human-power as an everyday energy source. Journal of Design Research, 14 (3), pp. 280-299. ISSN 1748-3050

SHRAHILY, R.Y., MEDJDOUB, B., KLALIB AOUN, H. and CHALAL, M.L., 2016. Construction site communication study using the RAM management system for BIM adaptation. International Journal of 3-D Information Modeling, 5 (4), pp. 39-53. ISSN 2156-1710

SIENA, F.L., BREEDON, P., ARMSTRONG, J., INKPIN, K. and NORRIS, A., 2016. The development of a novel steerable bougie to assist in airway management. Australasian Medical Journal, 9 (5), pp. 124-137. ISSN 1836-1935

SINGH, J. and ORDOÑEZ, I., 2016. Resource recovery from post-consumer waste: important lessons for the upcoming circular economy. Journal of Cleaner Production, 134, pp. 342-353. ISSN 0959-6526

SINHA, R., LAURENTI, R., SINGH, J., MALMSTRÖM, M.E. and FROSTELL, B., 2016. Identifying ways of closing the metal flow loop in the global mobile phone product system: a system dynamics modeling approach. Resources, Conservation and Recycling, 113, pp. 65-76. ISSN 0921-3449

TALTAVULL, P. and WHITE, M., 2016. The sources of house price change: identifying liquidity shocks to the housing market. Journal of European Real Estate Research, 9 (1). ISSN 1753-9269

TOKBOLAT, S., AL-ZUBAIDY, S. and BADR, A., 2016. Low-energy design for future housing developments in Kazakhstan: a case study. Energy Efficiency, 9 (1), pp. 211-222. ISSN 1570-646X

VAFAEIFARD, M., LEE, G., AKIB, S., IBRAHIM, S., YOON, Y. and JANG, M., 2016. Facile and economic one-pot synthesis of rigid functional-polyurethane for the effective treatment of heavy metal-contaminated urban storm water run-off. Desalination and Water Treatment, 57 (54), pp. 26114-26129. ISSN 1944-3994

WOOTTON-BEARD, P.C., XING, Y., DURAI PRABHAKARAN, R.T., ROBSON, P., BOSCH, M., THORNTON, J.M., ORMONDROYD, G.A., JONES, P. and DONNISON, I., 2016. Review: Improving the impact of plant science on urban planning and design. Buildings, 6 (4): 48. ISSN 2075-5309

YAKUBU, J., WOODWARD, R., GIDADO, K. and ABOAGYE-NIMO, E., 2016. Investigating the impact of waste reduction measures for Jos, Nigeria. Journal of Solid Waste Technology and Management, pp. 271-282. ISSN 1088-1697

ZULKIFLI, A.Z., MASNAN, S.E.F., AZMI, N.M., AKIB, S.M., AROF, H. and HARUN, S.W., 2016. A simple load sensor based on a bent single-mode-multimode-single-mode fiber structure. Sensors and Actuators A: Physical, 242, pp. 106-110. ISSN 0924-4247

Authored book

ABDELMONEM, M.G., 2016. The architecture of home in Cairo: socio-spatial practice of the hawari's everyday life. Abingdon: Routledge. ISBN 9781409445371

KETTLEY, S., 2016. Designing with smart textiles. London: Fairchild Books (Bloomsbury). ISBN 9781472569158

Chapter in book

ABDELMONEM, M.G., 2016. Chase over the Nile: the social evolution of the Riverine landscape in urban Egypt. In: C.N. SILVA, ed., Urban planning in North Africa. Abingdon: Routledge, p. 134. ISBN 9781472444844

ABDELMONEM, M.G., 2016. Conserving the relevance of heritage: corrective actions for sustainable historical fabric of the Arab city. In: M. ROBINSON, ed., International Conference Proceedings: Inheriting the City: Advancing Understandings of Urban Heritage, University of Birmingham, Taipei, Taiwan, 31 March - 4 April 2016. Birmingham: University of Birmingham. ISBN 9780704428645

ABOAGYE-NIMO, E., PIROOZFAR, A., WOOD, H., FARR, E.R.P. and RAYNER, C., 2016. An exploratory study of the impact of visual representation on perception of energy consumption in UK households. In: Proceedings of COBRA 2016: RICS The Construction, Building and Real Estate Research Conference, Toronto, Canada, 20-22 September 2016. London: RICS, pp. 1-18. ISBN 9781783211609

AMARO-MELLADO, J.-L. and ANTÓN, D., 2016. Spatial data infrastructure as a tool for cultural heritage management. In: F. FELIP MIRALLES, J. GUAL ORTÍ, M. CABEZA GONZÁLEZ and C. GARCÍA GARCÍA, eds., Drawing, building, dreaming: research on graphic expression applied to building. Valencia: Tirant lo Blanch, pp. 1051-1065. ISBN 9788491434856

AMARO-MELLADO, J.-L., ANTÓN, D. and RAMÍREZ JUIDÍAS, E., 2016. Experiencias docentes basadas en nuevas tecnologías: escritorios remotos y aplicaciones interactivas. In: T. RAMIRO-SÁNCHEZ, M.T. RAMIRO-SÁNCHEZ and M.P. BERMÚDEZ, eds., Evaluación de la Calidad de la Investigación y de la Educación Superior: libro de resúmenes XIII FECIES. Granada: Asociación Española de Psicología Conductual (AEPC), 331 - 331. ISBN 9788460892687

ANTÓN, D., 2016. La realidad aumentada y otras estrategias didácticas aplicadas a la Expresión Gráfica Arquitectónica. In: R. PORLÁN ARIZA and E. NAVARRO MEDINA, eds., III Jornadas de Docencia Universitaria: Programa de Formación Docente del Profesorado. Seville: Secretariado de Formación y Evaluación. Universidad de Sevilla, 696 - 706. ISBN 9788486849764

ANTÓN, D. and AMARO-MELLADO, J.-L., 2016. Augmented reality as a complement for graphic expression. In: F. FELIP MIRALLES, J. GUAL ORTÍ, M. CABEZA GONZÁLEZ and C. GARCÍA-GARCÍA, eds., Drawing, building, dreaming: research on graphic expression applied to building [Dibujar, construir, soñar: investigaciones en torno a la expresión gráfica aplicada a la edificación]. Valencia: Tirant Lo Blanch, pp. 911-921. ISBN 9788491434856

ANTÓN, D., AMARO-MELLADO, J.-L. and RAMÍREZ JUIDÍAS, E., 2016. Innovación docente en el ámbito de la ingeniería y la arquitectura a través de modelos 3D interactivos. In: T. RAMIRO-SÁNCHEZ, M.T. RAMIRO-SÁNCHEZ and M.P. BERMÚDEZ, eds., Evaluación de la Calidad de la Investigación y de la Educación Superior: libro de resúmenes XIII FECIES. Granada: Asociación Española de Psicología Conductual (AEPC), 330 - 330. ISBN 9788460892687

BREEDON, P., BYROM, B., SIENA, L. and MUEHLHAUSEN, W., 2016. Enhancing the measurement of clinical outcomes using Microsoft Kinect. In: Proceedings of the 2016 International Conference on Interactive Technologies and Games: EduRob in conjunction with iTAG 2016: iTAG 2016, Nottingham, 26-27 October 2016. Los Alamitos, CA: Institute of Electrical and Electronics Engineers, pp. 61-69. ISBN 9781509037384

BROWNE, J. and SOUTO, A., 2016. Cultural identity and the municipal gallery: the re-imagining of Bradford’s collection as a transcultural representation of identity at Cartwright Hall 1904-2014. In: D. HIGGINS and V. DHUPA, eds., In This Place: Cumulus Association Biannual International Conference: conference proceedings, School of Art & Design, Nottingham Trent University, Nottingham, 27 April - 1 May 2016. Nottingham: Nottingham Trent University: CADBE, pp. 51-57. ISBN 9780992887810

DEVILAT, B., 2016. Creating systematic records through time: the destruction and reconstruction of heritage areas affected by earthquakes in Chile. In: B. CAMPKIN and G. DUIJZINGS, eds., Engaged urbanism. Cities and methodologies. London: I.B. Tauris, pp. 22-23. ISBN 9781786721662

DEVILAT, B., 2016. Recording of heritage buildings: from measured drawing to 3D laser scanning. In: L. ALLEN and L.C. PEARSON, eds., Drawing futures. Speculations in contemporary drawing for art and architecture. London: UCL Press, pp. 236-240. ISBN 9781911307266

FERNÁNDEZ VALDERRAMA APARICIO, P. and ANTÓN GARCÍA, D., 2016. La docencia en Expresión Gráfica mediante el Aprendizaje Basado en Problemas. In: F. FELIP MIRALLES, J. GUAL ORTÍ, M. CABEZA GONZÁLEZ and C. GARCÍA GARCÍA, eds., Dibujar, construir, soñar = Drawing, building, dreaming: research on graphic expression applied to building. Valencia: Tirant Lo Blanch, 343 - 352. ISBN 9788491434856

FOUND, P.D. and LIN, M.-H., 2016. Smartphone enabled design: utilising unique markers for re-imagining Ming vases. In: D. HIGGINS and V. DHUPA, eds., In This Place: Cumulus Association Biannual International Conference: conference proceedings, School of Art & Design, Nottingham Trent University, Nottingham, 27 April - 1 May 2016. Nottingham: Nottingham Trent University: CADBE, pp. 347-352. ISBN 9780992887810

JONES, C., DUNSE, N., LIVINGSTONE, N. and CUTSFORTH, K., 2016. The restructuring of the institutional real estate portfolio in the UK. In: S. BIERNERT and S. SEBASTIAN, eds., 25th Annual European Real Estate Society Conference, Regensburg, Germany, 8-11 June 2016. Book of abstracts. European Real Estate Society, p. 331.

LE BON, M., BRAVO DE LAGUNA, F., CHEVAUX, E. and MELLITS, K.H., 2016. Viabilité et quantification d'une levure probiotique dans le système digestif du porc. In: Les Journées de la Recherche Porcine. Rennes, France: INRA and IFIP.

MANU, E., ANKRAH, N., CHINYIO, E.A. and PROVERBS, D., 2016. Functional consequences of trust in the construction supply chain: a multi-dimensional view. In: P.W. CHAN and C.J. NEISON, eds., Proceedings of the 32nd Annual ARCOM Conference, Manchester, 5-7 September 2016. Vol. 2. Reading: ARCOM, pp. 931-940.

MCLAREN, A., GOWOREK, H., COOPER, T., OXBORROW, L. and HILL, H., 2016. The effect of consumer attitudes on design for product longevity: the case of the fashion industry. In: P. LLOYD and E. BOHEMIA, eds., Proceedings of DRS 2016: Design + Research + Society - Future-Focused Thinking. 50th Anniversary Conference, Brighton, 27-30 June 2016. London: Design Research Society, pp. 3831-3846.

PASTOR, M., 2016. The archive of Spanish architect Julio Lafuente. In: B. ERCAN, ed., History'16 / III. International History Conference proceedings, Istanbul, Turkey, May 2016. Istanbul: Dakam Publishing, pp. 64-74. ISBN 9786059207232

PISCICELLI, L., COOPER, T., MORENO, M. and FISHER, T., 2016. The individual-practice framework: a design tool for understanding consumer behaviour. In: A. GENUS, ed., Sustainable consumption: design, innovation and practice. Switzerland: Springer, pp. 35-50. ISBN 9783319296654

PÉREZ-SUÁREZ, M., ANTÓN, D. and AMARO-MELLADO, J.-L., 2016. Las TIC como recurso docente de convergencia entre distintas áreas de conocimiento. In: J.F. DURÁN MEDINA and I. DURÁN VALERO, eds., TIC actualizadas para una nueva docencia universitaria. Madrid: McGraw-Hill/Interamericana de España, S.L., pp. 611-629. ISBN 9788448612658

QAYYUM, R., KAMAL, K., ZAFAR, T. and MATHAVAN, S., 2016. Wood defects classification using GLCM based features and PSO trained neural network. In: Z. XU and J. WANG, eds., ICAC 2016: 22nd International Conference on Automation and Computing, University of Essex, Colchester, 7-8 September 2016: Tackling the New Challenges in Automation & Computing. ICAC series . Piscataway, NJ, USA: Institute of Electrical and Electronics Engineers, Inc., pp. 273-277. ISBN 9781862181311

RICO DELGADO, F., NIETO JULIÁN, J.E. and ANTÓN GARCÍA, D., 2016. Un nuevo enfoque en la gestión de nubes de puntos obtenidos por escáner y fotogrametría, para la optimización de formatos imprimibles. In: F. FELIP MIRALLES, J. GUAL ORTÍ, M. CABEZA GONZÁLEZ and C. GARCÍA GARCÍA, eds., Dibujar, construir, soñar = Drawing, building, dreaming: research on graphic expression applied to building. Valencia: Tirant Lo Blanch, 1051 - 1065. ISBN 9788491434856

SALVIA, G. and COOPER, T., 2016. The role of design as a catalyst for sustainable DIY. In: A. GENUS, ed., Sustainable consumption: design, innovation and practice. Switzerland: Springer, pp. 15-34. ISBN 9783319296654

SU, D. and WU, Y., 2016. Sustainable technologies and their alication in industrial gearbox development. In: D. QIN and Y. SHAO, eds., Power engineering. Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016), Chongqing, P.R. China, 27–30 Octoberober 2016. London: CRC Press, pp. 849-858. ISBN 9781138032675

SUNG, K., COOPER, T. and KETTLEY, S., 2016. Individual upcycling in the UK: insights for scaling-up towards sustainable development. In: W.L. FILHO, ed., Sustainable development research at universities in the United Kingdom: approaches, methods and projects. World sustainability . Cham: Springer, pp. 193-227. ISBN 9783319478821

SUNG, K., COOPER, T. and KETTLEY, S., 2016. An alternative approach to influencing behaviour: adapting Darnton’s Nine Principles framework for scaling-up individual upcycling. In: P. LLOYD and E. BOHEMIA, eds., Proceedings of DRS 2016: Design + Research + Society - Future-Focused Thinking. 50th Anniversary Conference, Brighton, 27-30 June 2016. London: Design Research Society, pp. 1277-1290.

Conference contribution

ABDELMONEM, M.G., 2016. The sustainability of heritage: integrating smart management of cultural heritage into the sustainable and creative economy of the 21st century city. In: International Conference on Sustainable Mega Projects: Chance – Change – Challenge, British University in Egypt, El Sherouk City, Egypt, 3-5 May 2016.

ATHRESH, A.P., AL-HABAIBEH, A. and PARKER, K., 2016. An innovative and integrated approach for using energy from the flooded coal mines for pre-warming of a gas engine in standby mode using GSHP. In: 8th International Conference on Applied Energy (ICAE2016), Beijing, China, 8-11 October 2016.

BRAITHWAITE, N., 2016. Dialogues through design: ethnographic explorations of creative process. In: Cumulus Hong Kong 2016: Cumulus Open Design for E-very-thing, Hong Kong Design Institute, Hong Kong, China, 21-24 November 2016.

BROWN, D., KETTLEY, R. and KETTLEY, S., 2016. Interpersonal Process Recall – a method for reflecting on co-design experiences. In: Method Stories Workshop, ACM CHI 2016, San Jose, California, USA, 7 May 2016.

CHANDRAKUMAR, C., MATHAVAN, S. and KULATUNGA, A.K., 2016. Fuzzy AHP based multi-criteria decisions support system for eco-design. In: IEOM 2016, Sixth International Conference on Industrial Engineering and Operations Management, Kuala Lumpur, Malaysia, 8-10 March 2016.

COLE, C. and COOPER, T., 2016. Consumer decisions determining reuse and product lifetimes. In: 3rd Symposium on Urban Mining and Circular Economy (SUM2016), Bergamo, Italy, 23-25 May 2016.

COLE, C. and COOPER, T., 2016. Driving reuse: sustainability and ethics in product life extension. In: BAM (British Academy of Management) marketing and retail SIG event: Sustainability and Ethical Consumption, Surrey Business School, University of Surrey, Guildford, 28 April 2016.

COLE, C., COOPER, T. and GNANAPRAGASAM, A., 2016. Extending product lifetimes through WEEE reuse and repair: opportunities and challenges in the UK. In: Electronics Goes Green 2016+ Conference, Berlin, Germany, 7-9 September 2016.

DANIEL, E.I., PASQUIRE, C. and DICKENS, G., 2016. Exploring the factors that influence the implementation of the Last Planner® System on joint venture infrastructure projects: a case study approach. In: 24th Annual Conference of the International Group for Lean Construction, Boston, USA, 20-22 July 2016.

GOWOREK, H., MCLAREN, A., COOPER, T., OXBORROW, L. and CLAXTON, S., 2016. The impact of consumer attitudes on sustainable product development strategies: the case of clothing longevity. In: Thriving in Turbulent Times, British Academy of Management Conference, Newcastle, 6-8 September 2016.

GOWOREK, H., MCLAREN, A., OXBORROW, L., HILL, H., CLAXTON, S. and COOPER, T., 2016. Consumer perspectives on sustainable clothing consumption: enabling product longevity at the micro scale. In: Management and Environmental Sustainability Conference, University of Leicester, Leicester, May 2016.

HAWAS, A., AL-HABAIBEH, A. and MEDJDOUB, B., 2016. Innovative design of an educational simulation tool for exploring energy consumption in buildings towards enhancing public engagement. In: 8th International Conference on Applied Energy (ICAE2016), Beijing, China, 8-11 October 2016.

KETTLEY, S., SADKOWSKA, A. and LUCAS, R., 2016. Tangibility in e-textile participatory service design with mental health participants. In: Proceedings of DRS 2016 Design Research Society 50th Anniversary Conference, Brighton, 27-30 June 2016.

MAHMOOD, M., MATHAVAN, S. and RAHMAN, M., 2016. Pavement maintenance decision optimization using a novel discrete bare-bones particle swarm algorithm. In: 95th Annual Meeting, Transportation Research Board, National Academy of Sciences, Washington DC, USA, 10-14 January 2016.

MCLAREN, A., 2016. Darning clothes, weaving conversations: crafting sustainable fashion futures. In: Costume And Fashion In Context And Practice, Heritage Quay, University of Huddersfield, Huddersfield, 5-6 December 2016.

MUSA, M.M., PASQUIRE, C. and HURST, A., 2016. Where lean construction and value management meet. In: 24th Annual Conference of the International Group for Lean Construction, Boston, USA, 20-22 July 2016.

OGUCHI, M., TASAKI, T., DAIGO, I., COOPER, T., COLE, C. and GNANAPRAGASAM, A., 2016. Consumers' expectations for product lifetimes of consumer durables. In: Electronics Goes Green 2016+ Conference, Berlin, Germany, 7-9 September 2016.

OGUCHI, M., TASAKI, T., DAIGO, I., COOPER, T., COLE, C. and GNANAPRAGASAM, A., 2016. Expected product lifetimes of consumer durables - do product lifetimes meet the consumer’s expectation? In: International Society for Industrial Ecology Joint 12th Socio-Economic Metabolism Section Conference and 5th Asia-Pacific Conference, Nagoya, Japan, 28-30 September 2016.

PAPASTAVROU, E., BREEDON, P. and FAIRHURST, D., 2016. Incorporating self-assembly into additive manufacturing techniques for applications in hard tissue engineering. In: IOP PGS Conference: Printing for the Future Conference, Institute of Physics, London, 19 January 2016.

RODRIGUES, A., COOPER, T. and WATKINS, M., 2016. Systemic barriers to upscaling car sharing in the UK. In: 21st Sustainable Innovation Conference: 'Circular Economy' Innovation & Design, University for the Creative Arts, Epsom, Surrey, 7-8 November 2016.

SARHAN, S., PASQUIRE, C., MANU, E. and KING, A., 2016. Are Tier-one contractors making their money out of wasteful procurement arrangements? In: 24th Annual Conference of the International Group for Lean Construction, Boston, USA, 20-22 July 2016.

SOUTO, A., 2016. Migrants, cultural heritage and memory in Nottingham's periphery. In: The City in the Wake of Migration Workshop, Copnhagen Architecture Festival CAFx, Copenhagen, Denmark, 10-20 March 2016.

SU, D., 2016. Integration of sustainable technologies into the development of LED lighting products. In: 'The Lightbulb Moment: Lighting Success Stories’ of Edie.Live, NEC, Birmingham, 17-18 May 2016.

SUNG, K., COOPER, T. and KETTLEY, S., 2016. Actions across scales for scaling up sustainable practice/behaviour: the case of individual upcycling in the UK. In: 1st Conference on Management and Environmental Sustainability: Scaling Sustainability: Regulation and Resilience in Managerial Responses to Climate Change, University of Leicester, Leicester, 20 May 2016.

SUNG, K., COOPER, T. and KETTLEY, S., 2016. Individual upcycling in the UK: insights for scaling up towards sustainable development. In: Symposium on Sustainable Development Research at Universities in UK, Manchester, 5-6 April 2016.

VALERO-SILVA, N., KETTLEY, S. and KENT, A., 2016. Mental health service design: methodological and ethical challenges in stakeholder engagement. In: 30th British Academy of Management Conference (BAM2016), Newcastle University, Newcastle upon Tyne, 6-8 September 2016.

Digital or visual media

GNANAPRAGASAM, A., 2016. Restart Radio: How long our stuff should last? [Digital or Visual Media]

Edited book

HIGGINS, D. and DHUPA, V., 2016. In This Place: Cumulus Association Biannual International Conference : conference proceedings, School of Art & Design, Nottingham Trent University, Nottingham, 27 April - 1 May 2016. Nottingham: Nottingham Trent University: CADBE. ISBN 9780992887810

Exhibition

KERR, H.-Y., 2016. Magazines of the Japanese bubble economy. Mould Maps 6 - TERRAFORMERS, Bonington Gallery, Nottingham Trent University, Nottingham, 17 September - 21 October 2016.

MCLAREN, A., 2016. Darn Stylish I and Darn Stylish II. Costume And Fashion In Context And Practice, Heritage Quay, University of Huddersfield, Huddersfield, 5-6 December 2016.

MCLAREN, A., 2016. Radical Parkhead. Weave Parkhead Exhibition, Imageo Gallery, Glasgow, 20-25 August 2016.

MILLS, H., SOUTO, A. and BENDIX, A., 2016. Performing drawology: draw on the inspiration of others... Atrium Space, Bonington Gallery, Nottingham Trent University, Nottingham, 11 February 2016.

SOUTO, A., 2016. Architecture encaged – engaged architecture. The Bag Factory, Johannesburg, South Africa, September 2016.

SOUTO, A., 2016. Architecture encaged – engaged architecture. University of Nicosia, School of Architecture, Nicosia, Cyprus, 7-11 November 2016.

SOUTO, A. and SPASOJEVIC, D., 2016. Mapping Nottingham’s identity. MapNott Exhibition and Workshops, Phase 1, Nottingham Central Library, Nottingham, September 2016.

Newspaper or popular journal contribution

BRAITHWAITE, N., 2016. From paragons to melting pots: the changing role of cities in the world of fashion. The Conversation.

COLE, C., 2016. Make it easier to reuse and everyone will do it. Recycling & Waste World.

KERR, H.-Y., 2016. What is kawaii – and why did the world fall for the 'cult of cute'? The Conversation.

Professional or trade journal contribution

COLE, C., 2016. Making reuse easier for WEEE customers. Recycling & Waste World.

Research report for external body

COOPER, T., FISHER, T., HARMER, L., SALVIA, G. and BARR, C., 2016. Dirt, damage, servicing and repair: understanding motivations for product disposal. Technical report. Nottingham: Nottingham Trent University.

COOPER, T., OXBORROW, L., CLAXTON, S., GOWOREK, H., HILL, H. and MCLAREN, A., 2016. Strategies to improve design and testing for clothing longevity. Report for Defra. Nottingham: Nottingham Trent University.

SALVIA, G., BRAITHWAITE, N., MORENO, M., NORMAN, J., SCOTT, K., SUNG, K., COOPER, T., BARRETT, J. and HAMMOND, G., 2016. Understanding consumption: why and how do we use products? Leeds: Centre for Industrial Energy, Materials and Products (CIE-MAP).

SARHAN, S. and PASQUIRE, C., 2016. CLeMM: Customer Led Monetising Method: user guide. Nottingham: Centre for Lean Projects, Nottingham Trent University.

SARHAN, S. and PASQUIRE, C., 2016. Monetising human impacts. CLeMM: Customer Led Monetising Method. Nottingham: Centre for Lean Projects, Nottingham Trent University.

SELIM, G. and ABDELMONEM, M.G., 2016. Spatial narratives of revolt: public performance during anti-nuclear protests in Tokyo. Final report. London: Japan Foundation.