Items where Division is "School of Architecture, Design and the Built Environment" and Year is 2015

ABBASS, J.K. and AL-HABAIBEH, A., 2015. A comparative study of using spindle motor power and eddy current for the detection of tool conditions in milling processes. In: 2015 IEEE 13th International Conference on Industrial Informatics (INDIN), Cambridge, 22-24 July 2015.

ABDELMONEM, M.G., 2015. Conserving the relevance of heritage: corrective actions for sustainable historical fabric of the Arab city. In: M. AL-NAIM, ed., Research and heritage. Riyadh: National Built Heritage Forum.

ABDELMONEM, M.G., 2015. Urban Oasis: Ajman as Event City. Ajman as an Event City: A Future Vision. International Design Competition, Ajman: United Arab Emirates, March 2015.

ABDELMONEM, M.G., 2015. The territories of identity: architecture in the age of evolving globalization. Edited by Soumyen Bandyopadhyay and Guillermo Garma Montiel. Traditional Dwellings and Settlements Review, 27 (1), pp. 92-93. ISSN 1050-2092

ABDELMONEM, M.G. and MCWHINNEY, R., 2015. In search of common grounds: stitching the divided landscape of urban parks in Belfast. Cities, 44, pp. 40-49. ISSN 0264-2751

ABOAGYE-NIMO, E., RAIDÉN, A., KING, A. and TIETZE, S., 2015. Using tacit knowledge in training and accident prevention. Proceedings of the Institution of Civil Engineers - Management, Procurement and Law, 168 (5), pp. 232-240. ISSN 1751-4304

AHMADI, M., 2015. Exploring the impact of religious and pre-Islamic Persian gardens in the creation of Chahar Bagh Avenue, Isfahan. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 4-17. ISBN 9780957600980

AHMED, M.S., 2015. Comparison between theoretical and experimental natural frequencies of RC slabs. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 36-43. ISBN 9780957600980

AHMED, M.S. and MOHAMMAD, F.A., 2015. Experimental modal analysis of reinforced concrete square slabs. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (3).

AKIB, S. and JAHANGIRZADEH, A., 2015. Experimental study for determination of collar dimensions around bridge pier. The Baltic Journal Of Road And Bridge Engineering, 10 (1), pp. 89-96. ISSN 1822-427X

AL-GHALIB, A.A. and MOHAMMAD, F.A., 2015. Damage and repair classification in reinforced concrete beams using frequency domain data. Materials and Structures, 49 (5), pp. 1893-1903. ISSN 1359-5997

AL-HABAIBEH, A., 2015. Could traditional architecture offer relief from soaring temperatures in the Gulf? The Conversation.

AL-HABAIBEH, A., MEYEROWITZ, B., DUOLAN, and ATHRESH, A., 2015. The design and development of an innovative simulator for an open loop system for extracting energy from flooded coal mines. Energy Procedia, 75, pp. 1470-1476. ISSN 1876-6102

AL-HASHIMI, F.W., 2015. The South Gate, the persistent element of the old city of Erbil. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 18-28. ISBN 9780957600980

ANKRAH, N.A., MANU, E. and BOOTH, C., 2015. Beyond sustainable buildings: eco-efficiency to eco-effectiveness through cradle-to-cradle design. In: 7th International Conference on Sustainability in Energy and Buildings, Lisbon, Portugal, 1-5 July 2015.

ANKRAH, N.A., MANU, E. and BOOTH, C., 2015. Cradle to cradle implementation in business sites and the perspectives of tenant stakeholders. Energy Procedia, 83, pp. 31-40. ISSN 1876-6102

ANTÓN, D. and PÉREZ SUÁREZ, M., 2015. La docencia universitaria novel como mejora metodológica. Opción: Revista de Ciencias Humanas y Sociales, 31 (3), pp. 104-124. ISSN 1012-1587

APPIAH, S., 2015. Approaches for selecting an appropriate UK procurement route. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 64-75. ISBN 9780957600980

APPIAH, S., KNIGHT, A., COFFEY, C. and MORLEDGE, R., 2015. A theoretical framework for selecting building procurement routes. In: RICS Construction and Building Research Conference, Australia, 4-5 September 2015.

ASHLEY, C., 2015. Chess piece, Botswana. In: K. JACOBS, C. KNOWLES and C. WINGFIELD, eds., Trophies, relics and curios? Missionary heritage from Africa and the Pacific. Leiden: Sidestone Press, pp. 167-169. ISBN 9789088902710

ASHLEY, C.Z. and GRILLO, K.M., 2015. Archaeological ceramics from eastern Africa: past approaches and future directions. Azania: Archaeological Research in Africa, 50 (4), pp. 460-480. ISSN 0067-270X

ASRAR, M., AL-HABAIBEH, A. and HOUDA, M.R., 2015. A comparative study between visual, near infrared and infrared images for the detection of veins for intravenous cannulation. In: AITA 2015 - Advanced Infrared Technology and Applications, Pisa, Italy, 29 September - 2 October 2015.

ATHRESH, A., AL-HABAIBEH, A. and PARKER, K., 2015. Innovative Approach for Heating of Buildings Using Water from a Flooded Coal Mine Through an Open Loop Based Single Shaft GSHP System. Energy Procedia, 75, pp. 1221-1228. ISSN 1876-6102

BASSER, H., CHERAGHI, R., KARAMI, H., ARDESHIR, A., AMIRMOJAHEDI, M., AKIB, S., JAHANGIRZADEH, A. and SHAMSHIRBAND, S., 2015. Modeling sediment transport around a rectangular bridge abutment. Environmental Fluid Mechanics, 15 (6), pp. 1105-1114. ISSN 1567-7419

BASSER, H., KARAMI, H., SHAMSHIRBAND, S., AKIB, S., AMIRMOJAHEDI, M., AHMAD, R., JAHANGIRZADEH, A. and JAVIDNIA, H., 2015. Hybrid ANFIS–PSO approach for predicting optimum parameters of a protective spur dike. Applied Soft Computing, 30, pp. 642-649. ISSN 1568-4946

BAYAT, A.E., JUNIN, R., KHARRAT, R., SHAMSHIRBAND, S., AKIB, S. and BUANG, Z., 2015. Optimization of solvent composition and injection rate in vapour extraction process. Journal of Petroleum Science and Engineering, 128, pp. 33-43. ISSN 0920-4105

BEETHAM, P., DIJKSTRA, T., DIXON, N., FLEMING, P., HUTCHISON, R. and BATEMAN, J., 2015. Lime stabilisation for earthworks: a UK perspective. Proceedings of the ICE - Ground Improvement, 168 (2), pp. 81-95. ISSN 1755-0769

BIRKBECK, D. and KRUCZKOWSKI, S., 2015. Building for life 12: the sign of a good place to live. Nottingham: Nottingham Trent University: CADBE. ISBN 9780957600966

BRAITHWAITE, N., 2015. Fashion mapping: capturing style and meaning through the everyday practice of dress. In: The Fashion Project: Exploring Critical Issues: 7th Global Meeting, Mansfield College, Oxford, 24-26 September 2015.

BRAITHWAITE, N., 2015. From crowns and lace to bubble bath necklaces - the morphing meaning of luxury. The Conversation.

BRAITHWAITE, N., 2015. Health warning: five fashion trends that are terrible for you. The Conversation.

BRAITHWAITE, N., 2015. What your shoes say about you (quite a lot, actually). The Conversation.

BRAITHWAITE, N., 2015. The history of shoes has been frivolous, ridiculous and extreme. The Conversation.

BRAITHWAITE, N., DENSLEY-TINGLEY, D. and MORENO, M., 2015. Should energy labels for washing machines be expanded to include a durability rating? In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 9-18. ISBN 9780957600997

BRIGGS-GOODE, A. and GLAZZARD, M., 2015. An internet of soft things. In: Futurescan 3: Intersecting Identities, Glasgow School of Art, Glasgow, 11-12 November 2015.

BROWNE, J., 2015. Cultural identity and the municipal gallery: the reimagining of Bradford’s collection as a transcultural representation of identity at Cartwright Hall 1904-2014. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 86-96. ISBN 9780957600980

BULL, R., 2015. ICT as an enabler for sustainable development: reflections on opportunities and barriers. Journal of Information, Communication and Ethics in Society, 13 (1), pp. 19-23. ISSN 1477-996X

BULL, R., EVERITT, D. and STUART, G., 2015. Policy, 'politicking' and organisational culture – barriers to engaging employees in behaviour change initiatives. In: T.L. LINDSTRÖM, ed., eceee Summer Study Proceedings, Belambra Les Criques, Toulon/Hyères, France, 1-6 June 2015. Stockholm, Sweden: eceee, pp. 2143-2152. ISBN 9789198048261

BULL, R., LEMON, M., EVERITT, D. and STUART, G., 2015. Moving beyond feedback: energy behaviour and local engagement in the United Kingdom. Energy Research & Social Science, 8, pp. 32-40. ISSN 2214-6296

CABRERA SERRENHO, A., SALVIA, G., BRAITHWAITE, N., MORENO, M., NORMAN, J. and SCOTT, K., 2015. The role of consumption in material reduction opportunities: the impact of product lifetime in supplying the UK steel demand. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 38-43. ISBN 9780957600997

CASAMAYOR, J.L., 2015. How to reduce the environmental impact of LED-based lighting products during the design process. PhD, Nottingham Trent University.

CASAMAYOR, J.L., SU, D. and SARSHAR, M., 2015. Extending the lifespan of LED-lighting products. Architectural Engineering and Design Management, 11 (2), pp. 105-122. ISSN 1745-2007

CHEAH, H.C., 2015. Development of raised access floor panel by optimisation techniques. In: M. SARSHAR DRISCOLL, A. IANAKIEV and B. SERTYESILISIK, eds., Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical Uni. Nottingham: Nottingham Trent University: CADBE, pp. 57-61. ISBN 9780992887803

CLAXTON, S., COOPER, T., HILL, C. and HOLBROOK, K., 2015. Opportunities and challenges of new product development and testing for longevity in clothing. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 62-68. ISBN 9780957600997

COLE, C., 2015. Climate change and the repair, reuse culture. In: Climate Change Showcase and Networking Event, Nottingham Trent University, Nottingham, 4 December 2015.

COOPER, T., BRAITHWAITE, N., MORENO, M. and SALVIA, G., 2015. Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE. ISBN 9780957600997

COOPER, T., BRAITHWAITE, N., MORENO, M. and SALVIA, G., 2015. Product Lifetimes and the Environment Conference: editorial. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, III. ISBN 9780957600997

COOPER, T., HUGHES, M. and CLAXTON, S., 2015. From rag trade to retail: garment failure and the potential for sustainable fashion. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 73-80. ISBN 9780957600997

COULTER, F.B. and IANAKIEV, A., 2015. 4D printing inflatable silicone structures. 3D Printing and Additive Manufacturing, 2 (3), pp. 140-144. ISSN 2329-7662

CUI, J., 2015. Energy use and indoor environment in a sample of monitored domestic buildings in the UK. In: M. SARSHAR DRISCOLL, A. IANAKIEV and B. SERTYESILISIK, eds., Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical Uni. Nottingham: Nottingham Trent University: CADBE, pp. 9-17. ISBN 9780992887803

DANIEL, E.I., PASQUIRE, C. and DICKENS, G., 2015. Exploring the implementation of the Last Planner® System through IGLC community: twenty one years of experience. In: 23rd Annual Conference of the International Group for Lean Construction, Perth, Australia, 29-31 July 2015, Perth.

DE SILVA, R.P., 2015. Effect of climate change on potential groundwater recharge in the dry zone of Sri Lanka. British Journal of Environment and Climate Change, 5 (1), pp. 23-36. ISSN 2231-4784

DI MARIA, V. and IANAKIEV, A., 2015. Adhesive connections in timber: a comparison between rough and smooth wood bonding surfaces. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (3), pp. 395-401.

DOMINGUES, A.R., MARQUES, P., GARCIA, R., FREIRE, F. and DIAS, L.C., 2015. Applying multi-criteria decision analysis to the life-cycle assessment of vehicles. Journal of Cleaner Production, 107, pp. 749-759. ISSN 0959-6526

DOMINGUES, A.R., MORENO PIRES, S., CAEIRO, S. and RAMOS, T.B., 2015. Defining criteria and indicators for a sustainability label of local public services. Ecological Indicators, 57, pp. 452-464. ISSN 1470-160X

DONKOH, D., ADIYRAH, E. and ABOAGYE-NIMO, E., 2015. An exploratory study into promoting construction health and safety in Ghana through public works procurement. In: M. BEHM and C. MCALEENAN, eds., Proceedings of CIB W099 International Health and Safety Conference: Benefitting Workers and Society through Inherently Safe(r) Construction, Ulster University, Belfast, 9-11 September 2015. Downpatrick: EEI Publishing, pp. 289-297. ISBN 9781909854017

EDWARDS, C., ATKINSON, H., KETTLEY, S., O'BRIEN, S., RAIZMAN, D. and WILLIS, A.-M., 2015. The Bloomsbury encyclopaedia of design. London: Bloomsbury Academic. ISBN 9781472521576

ELGARGNI, M., AL-HABAIBEH, A. and LOTFI, A., 2015. Cutting tool tracking and recognition based on infrared and visual imaging systems using principal component analysis (PCA) and discrete wavelet transform (DWT) combined with neural networks. The International Journal of Advanced Manufacturing Technology, 77 (9), pp. 1965-1978. ISSN 0268-3768

ELGARGNI, M.A. and AL-HABAIBEH, A., 2015. Analytical and comparative study of using a CNC machine spindle motor power and infrared technology for the design of a cutting tool condition monitoring system. In: 2015 IEEE 13th International Conference on Industrial Informatics (INDIN), Cambridge, 22-24 July 2015.

ELLIOTT, B., BULL, R. and MALLABURN, P., 2015. A new lease of life? Investigating UK property investor attitudes to low carbon investment decisions in commercial buildings. Energy Efficiency, 8 (4), pp. 667-680. ISSN 1570-646X

EVANS, R., 2015. Sustainable assessment of structures and materials using ground penetrating radar (GPR). In: M. SARSHAR DRISCOLL, A. IANAKIEV and B. SERTYESILISIK, eds., Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical Uni. Nottingham: Nottingham Trent University: CADBE, pp. 77-87. ISBN 9780992887803

FANSHAWE, S., AL-HABAIBEH, A. and SHAKMAK, B., 2015. An innovative design and evaluation of a stratified hot water storage system - the Water Snake. In: 2015 IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies (AEECT), Amman, Jordan, 3 November 2015.

FISHER, T., COOPER, T., HARMER, L., SALVIA, G. and BARR, C., 2015. The relationship between ideas about cleanliness and actions that affect product longevity. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 119-124. ISBN 9780957600997

FOUND, P.D. and LIN, M.-H., 2015. Customizing personal objects: a pilot study using a smartphone to "design" a mini vase. In: V. POPOVIC, A. BLACKLER, D.-B. LUH, N. NIMKULRAT, B. KRAAL and Y. NAGAI, eds., IASDR 2015 Interplay Proceedings. IASDR 2015 Interplay Conference, Brisbane, Australia, 2-5 November 2015. Brisbane: IASDR, pp. 666-679. ISBN 9780646943183

FU, F., SUN, J. and PASQUIRE, C., 2015. Carbon Emission Assessment for Steel Structure Based on Lean Construction Process. Journal of Intelligent & Robotic Systems, 79 (3-4), pp. 401-416. ISSN 0921-0296

GITTENS, D. and HUFFORD, A., 2015. The freedom of the sketch and the tyranny of the digital image. In: AIARG 2015 Conference, University College Dublin, Dublin, Ireland, 30-31 January 2015.

GLAZZARD, M., KETTLEY, R., KETTLEY, S., WALKER, S., LUCAS, R. and BATES, M., 2015. Facilitating a ‘non-judgmental’ skills-based co-design environment. In: K. CHRISTER, ed., Design4Health: 3rd European Design4Health Conference, Sheffield Hallam University, Sheffield, 13-16 July 2015. Sheffield: Sheffield Hallam University. ISBN 9781843873853

GOSTAUTAS, I., 2015. The spatial analysis of returns and price risk in residential property markets. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 53-63. ISBN 9780957600980

GOWOREK, H., HILLER, A., FISHER, T., COOPER, T. and WOODWARD, S., 2015. Key factors influencing the sustainability impacts of purchase and post-purchase consumer decision-making. In: EAERCD 2015, the 18th International Conference on Research in the Distributive Trades of the European Association for Education and Research in Commercial Distribution (EAERCD), University of Rennes, France, 1-3 July 2015. European Association for Education and Research in Commercial Distribution (EAERCD). ISBN 9782746684515

HACKETT, V., PASQUIRE, C., STRATTON, R. and KNIGHT, A., 2015. The use of first run studies to develop standard work in liquefied natural gas Plant refurbishment. In: 23rd Annual Conference of the International Group for Lean Construction, Perth, Australia, 29-31 July 2015.

HARMER, L., COOPER, T., FISHER, T., SALVIA, G. and BARR, C., 2015. The joy of vacuuming? How the user experience affects vacuum cleaner longevity. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 138-145. ISBN 9780957600997

HE, G., ZHANG, M., ZHOU, Q. and PAN, G., 2015. Molecular dynamics simulations of structural transformation of perfluorooctane sulfonate (PFOS) at water/rutile interfaces. Chemosphere, 134, pp. 272-278. ISSN 0045-6535

HILL, H., TAYLOR, R. and ST. JOHN-JAMES, A., 2015. Global perspectives and translations of consuming clothing waste in the present. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 146-151. ISBN 9780957600997

HOLT, A. and ECCLES, T., 2015. Financial reporting for commercial service charges in the retail sector: benchmarking practice standards for UK shopping centres. Property Management, 33 (2), pp. 152-172. ISSN 0263-7472

HOXLEY, M. and CRABBE, A., 2015. CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE. ISBN 9780957600980

HOXLEY, M. and CRABBE, A., 2015. Editorial. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, p. 1. ISBN 9780957600980

HUGHES-RILEY, T., 2015. Autonomous reed bed installations. Water & Wastewater International, 30 (4). ISSN 0891-5385

IRHOMA, A., 2015. Life cycle assessment of Libyan crude oil. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 189-195. ISBN 9780957600980

JAMEEL, A., KHALID, S., KHAN, M., KAMAL, K., AQEEL, A., MATHAVAN, S., AWAIS, T. and ZAFAR, T., 2015. A Bio inspired UAV model based on Corvus Splendens. In: Proceedings of the 2015 International Conference on Fluid Power and Mechatronics (FPM), Harbin, China, 5-7 August 2015. Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE), pp. 797-802. ISBN 9781479987702

JONES, C., DUNSE, N. and CUTSFORTH, K., 2015. The changing relationships between government bond yields and capitalisation rates: evidence from the UK, USA and Australia. Journal of European Real Estate Research, 8 (2), pp. 153-171. ISSN 1753-9269

KAVEH, B., 2015. Finite element modelling of interaction between surface and Darcy flow regimes through soils. In: M. SARSHAR DRISCOLL, A. IANAKIEV and B. SERTYESILISIK, eds., Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical Uni. Nottingham: Nottingham Trent University: CADBE, pp. 88-97. ISBN 9780992887803

KETTLEY, R., LUCAS, R., JONES, I. and KETTLEY, S., 2015. Practice-led critical reflection on the ethics of ‘an Internet of soft things’ [forthcoming]. In: Interactive Technologies and Games Conference, Nottingham, 22-23 October 2015, Nottingham.

KETTLEY, S., BATES, M. and KETTLEY, R., 2015. Reflections on the heuristic experiences of a multidisciplinary team trying to bring the PCA to participatory design (with emphasis on the IPR method). In: Adjunct: the 2015 ACM International Joint Conference on Pervasive and Ubiquitous Computing (UbiComp 2015), Osaka, Japan, 7-11 September 2015. New York, NY: ACM. ISBN 9781450335751

KETTLEY, S., KETTLEY, R. and BATES, M., 2015. Participatory design and the humanist landscape [workshop]. In: The 2015 ACM International Joint Conference on Pervasive and Ubiquitous Computing (UbiComp 2015), Osaka, Japan, 7-11 September 2015, Osaka, Japan.

KETTLEY, S., KETTLEY, R. and BATES, M., 2015. An introduction to IPR as a Participatory Design research method. In: Adjunct: the 2015 ACM International Joint Conference on Pervasive and Ubiquitous Computing (UbiComp 2015), Osaka, Japan, 7-11 September 2015. New York, NY: ACM. ISBN 9781450335751

KETTLEY, S., KETTLEY, R. and BATES, M., 2015. An introduction to the person-centred approach as an attitude for participatory design. In: Adjunct: the 2015 ACM International Joint Conference on Pervasive and Ubiquitous Computing (UbiComp 2015), Osaka, Japan, 7-11 September 2015. New York, NY: ACM. ISBN 9781450335751

KIAN MANESH RAD, E., SUN, M. and BOSCHÉ, F., 2015. A consistency-checking consensus-building method to assess complexity of energy megaprojects. In: 29th IPMA World Congress, Panama, 29-30 September 2015.

KRUCZKOWSKI, S., 2015. Is there any value left in building for life? In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 173-181. ISBN 9780957600980

LAURENTI, R., SINHA, R., SINGH, J. and FROSTELL, B., 2015. Some pervasive challenges to sustainability by design of electronic products – a conceptual discussion. Journal of Cleaner Production, 108, pp. 281-288. ISSN 0959-6526

LU, C., 2015. Urban agriculture and vertical farming. In: RCUK Water Showcase 2015 - Water in Future Cities: Green Food & Garden Cityscapes, Royal Victoria Dock, London, 30 June 2015.

MAHMOOD, M., 2015. Cross validation of multi input deterioration prediction model (MID-PM) for network level pavement management. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 44-52. ISBN 9780957600980

MAHMOOD, M.S., 2015. Network-level maintenance decisions for flexible pavement using a soft computing-based framework. PhD, Nottingham Trent University.

MANU, E., ANKRAH, N., CHINYIO, E. and PROVERBS, D., 2015. Trust influencing factors in main contractor and subcontractor relationships during projects. International Journal of Project Management, 33 (7), pp. 1495-1508. ISSN 0263-7863

MARTIN-DU PAN, O., EAMES, P., ROWLEY, P., BOUCHLAGHEM, D. and SUSMAN, G., 2015. Current and future operation scenarios for a 50,000 MWh district heating system. Architectural Engineering and Design Management, 11 (4), pp. 280-304. ISSN 1745-2007

MATHAVAN, S., KAMAL, K. and RAHMAN, M., 2015. A review of three-dimensional imaging technologies for pavement distress detection and measurements. IEEE Transactions on Intelligent Transportation Systems, 16 (5), pp. 2353-2362. ISSN 1524-9050

MATHAVAN, S., RAHMAN, M. and KAMAL, K., 2015. Use of a self-organizing map for crack detection in highly textured pavement images. Journal of Infrastructure Systems, 21 (3), 04014052. ISSN 1076-0342

MCLAREN, A., 2015. Wear your heart on your sleeve - darning sampler. PLATE Exhibition (Product Lifetimes And The Environment), Nottingham Trent University, Nottingham, 17-19 June 2015.

MCLAREN, A. and MCLAUCHLAN, S., 2015. Crafting sustainable repairs: practice-based approaches to extending the life of clothes. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 221-228. ISBN 9780957600997

MCLAREN, A., OXBORROW, L., COOPER, T., HILL, H. and GOWOREK, H., 2015. Clothing longevity perspectives: exploring consumer expectations, consumption and use. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 229-235. ISBN 9780957600997

MENDOZA, M., 2015. Felix Candela’s first European Project: The John Lewis Warehouse, Stevenage New Town. Architectural Research Quarterly, 19 (2), pp. 149-160. ISSN 1359-1355

MOHAMED, A.M.A., AL-HABAIBEH, A., ABDO, H. and ELABAR, S., 2015. Towards exporting renewable energy from MENA region to Europe: an investigation into domestic energy use and householders’ energy behaviour in Libya. Applied Energy, 146, pp. 247-262. ISSN 0306-2619

MOHAMMAD, F.A. and SEYAN, D.A., 2015. Optimum design of reinforced concrete rectangular columns subjected to axial compression and biaxial bending moments. ATINER'S Conference Paper Series (1710). ISSN 2241-2891

MOMOH, J., 2015. Achieving sustainable urbanism through the use of environmental assessment tools: the role of sustainable urbanism in developing countries. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 182-188. ISBN 9780957600980

MORENO, M., PISCICELLI, L., COOPER, T. and FISHER, T., 2015. Presenting the Design for Individuals and Practices (DIP) toolkit. In: Global Cleaner Production and Sustainable Consumption Conference 2015, Sitges, Spain, 1-4 November 2015.

MULHOLLAND, C., ABDELMONEM, M.G. and SELIM, G., 2015. Shared architecture, social practice, and intergroup mixing in Belfast. In: The Architecture of Alterity (AoA) Symposium, University of Edinburgh, Edinburgh, Scotland, 25-27 May 2015.

NIETO-JULIÁN, J.E., MOYANO-CAMPOS, J.J., RICO-DELGADO, F. and ANTÓN, D., 2015. Analysis and project management within the HBIM (Historic Building Information Modelling): a study example of tiles and flooring in the built heritage. In: II International Congress Digital Heritage 2015, Palacio de Congresos de Granada, Granada, Spain, 28 September - 2 October 2015.

OLAWALE, Y. and SUN, M., 2015. Construction project control in the UK: current practice, existing problems and recommendations for future improvement. International Journal of Project Management, 33 (3), pp. 623-637. ISSN 0263-7863

OSWALD, D., ABOAGYE-NIMO, E., SMITH, S., RAIDÉN, A. and SHERRATT, F., 2015. ‘You couldn’t finish the job without breaking the rules’: common sense safety on a large construction project. In: A. RAIDÉN and E. ABOAGYE-NIMO, eds., Proceedings 31st Annual ARCOM Conference, Lincoln, 7-9 September 2015. Reading: Association of Researchers in Construction Management, pp. 529-538. ISBN 9780955239090

OXBORROW, L., CLAXTON, S., COOPER, T. and HILL, H., 2015. Product development and supply: help or hindrance to clothing longevity? In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 264-269. ISBN 9780957600997

PASQUIRE, C., SARHAN, S. and KING, A., 2015. Exploring the implementation of the Last Planner® System through IGLC community: twenty one years of experience. In: 23rd Annual Conference of the International Group for Lean Construction, Perth, Australia, 29-31 July 2015.

PETKOVIĆ, D., PROTIĆ, M., SHAMSHIRBAND, S., AKIB, S., RAOS, M. and MARKOVIĆ, D., 2015. Evaluation of the most influential parameters of heat load in district heating systems. Energy and Buildings, 104, pp. 264-274. ISSN 0378-7788

PISCICELLI, L., 2015. The role of values in collaborative consumption. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 163-172. ISBN 9780957600980

PISCICELLI, L., COOPER, T. and FISHER, T., 2015. Sharing values: the relationship between value(s) and meanings in collaborative consumption. In: K. THORNTON, ed., Unmaking Waste 2015, Adelaide, South Australia, 22-24 May 2015: conference proceedings. Adelaide, South Australia: Zero Waste SA Research Centre for Sustainable Design and Behaviour, pp. 143-151. ISBN 9780994336071

PISCICELLI, L., COOPER, T. and FISHER, T., 2015. Understanding consumer influences on product lifetimes: the Individual-Practice Framework. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 277-282. ISBN 9780957600997

PISCICELLI, L., COOPER, T. and FISHER, T., 2015. The role of values in collaborative consumption: insights from a product-service system for lending and borrowing in the UK. Journal of Cleaner Production, 97, pp. 21-29. ISSN 0959-6526

RAIDÉN, A. and ABOAGYE-NIMO, E., 2015. Proceedings 31st Annual ARCOM Conference, Lincoln, 7-9 September 2015: vol. 1. Reading: Association of Researchers in Construction Management. ISBN 9780955239090

RAIDÉN, A. and ABOAGYE-NIMO, E., 2015. Proceedings 31st Annual ARCOM Conference, Lincoln, 7-9 September 2015: vol. 2. Reading: Association of Researchers in Construction Management. ISBN 9780955239090

RAMOS, T.B., MONTAÑO, M., JOANAZ DE MELO, J., SOUZA, M.P., CARVALHO DE LEMOS, C., DOMINGUES, A.R. and POLIDO, A., 2015. Strategic environmental assessment in higher education: Portuguese and Brazilian cases. Journal of Cleaner Production, 106, pp. 222-228. ISSN 0959-6526

RASHEED, A., KAMAL, K., ZAFAR, T., MATHAVAN, S. and RAHMAN, M., 2015. Stabilization of 3D pavement images for pothole metrology using the Kalman filter. In: Proceedings of the 2015 IEEE 18th International Conference on Intelligent Transportation Systems (ITSC 2015), Gran Canaria, Spain, 15-18 September 2015,. Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE), pp. 2671-2676. ISBN 9781467365963

RASHID, M., KAMAL, K., ZAFAR, T., SHEIKH, Z., SHAH, A. and MATHAVAN, S., 2015. Energy prediction of a combined cycle power plant using a particle swarm optimization trained feedforward neural network. In: Proceedings of the 2015 International Conference on Mechanical Engineering, Automation and Control Systems (MEACS), Tomsk, Russia, 1-4 December 2015. Piscataway, NJ: Institute of Electrical and Electronic Engineers (IEEE). ISBN 9781467381154

RIMMINGTON, A., DICKENS, G. and PASQUIRE, C., 2015. Impact of Information and Communication Technology (ICT) on construction projects. Organization, Technology & Management in Construction: an International Journal, 7 (3), pp. 1367-1382. ISSN 1847-5450

ROBINSON, J., 2015. PhD synopsis: Quantifying and evaluating the risk posed to straw bale constructions from moisture. In: M. SARSHAR DRISCOLL, A. IANAKIEV and B. SERTYESILISIK, eds., Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical Uni. Nottingham: Nottingham Trent University: CADBE, pp. 35-44. ISBN 9780992887803

RODRIGUES, A., COOPER, T. and WATKINS, M., 2015. Driving in the wrong lane: towards a longer life-span of cars. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 311-317. ISBN 9780957600997

RODRIGUES, A., COOPER, T. and WATKINS, M., 2015. User-intensive cars; design contributions for more sustainable approaches to personal transportation. In: Sustainable Innovation 2015. 20th International Conference ‘State of the Art’ Sustainable Innovation & Design, University for the Creative Arts, Epsom, Surrey, 9-10 November 2015.

ROGERS, J.G., BRAITHWAITE, N., COOPER, S.J.G., COOPER, S., DENSLEY-TINGLEY, D., MORENO, M.A., RODRIGUES, A. and SALVIA, G., 2015. Product renovation and shared ownership: sustainable routes to satisfying the world's growing demand for goods. In: WEENTECH Proceedings of the Global Conference on Energy and Sustainable Development (GCESD2015), Coventry University, Coventry, 24-26 February 2015. Coventry: World Energy and Environmental Technology Ltd. (WEENTECH), pp. 20-27.

ROGERS, J.G., COOPER, S.J.G., COOPER, S., TINGLEY, D.D., BRAITHWAITE, N., MORENO, M., RODRIGUES, A. and SALVIA, G., 2015. Product longevity and shared ownership: Sustainable routes to satisfying the world’s growing demand for goods . AIMS Energy, 3 (4), pp. 547-561. ISSN 2333-8326

ROGERS, J.G. and RODRIGUES, A., 2015. Product leasing: a strategy to allow manufacturers and customers to benefit from elongation of product life. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 318-323. ISBN 9780957600997

SAAD, A., SU, D., MARSH, P. and WU, Z., 2015. Investigating environmental management and quality management issues in the Libyan food industry. British Journal of Economics, Management & Trade, 9 (3), pp. 1-16. ISSN 2278-098X

SALVIA, G., 2015. Design in the new Do-It-Yourself age: trialing workshops for repairing. In: Virtuous Circle: Summer Cumulus Conference, Politecnico di Milano, Milan, Italy, 3-7 June 2015, Milan.

SALVIA, G., COOPER, T., FISHER, T., HARMER, L. and BARR, C., 2015. What is broken? Expected lifetime, perception of brokenness and attitude towards maintenance and repair. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 342-348. ISBN 9780957600997

SARSHAR DRISCOLL, M., IANAKIEV, A. and SERTYESILISIK, B., 2015. Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical University; [and] Low Carbon Buildings and Communities in the Sustainable Built Environment, 23-25 February 2015, Istanbul Technical University. Nottingham: Nottingham Trent University: CADBE. ISBN 9780992887803

SARSHAR DRISCOLL, M., IANAKIEV, A. and SERTYESILISIK, B., 2015. Preface. In: M. SARSHAR DRISCOLL, A. IANAKIEV and B. SERTYESILISIK, eds., Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical Uni. Nottingham: Nottingham Trent University: CADBE, i. ISBN 9780992887803

SHAKMAK, B. and AL-HABAIBEH, A., 2015. Detection of water leakage in buried pipes using infrared technology; a comparative study of using high and low resolution infrared cameras for evaluating distant remote detection. In: 2015 IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies (AEECT), Amman, Jordan, 3 November 2015.

SHAMSHIRBAND, S., GOCIC, M., PETKOVIC, D., SABOOHI, H., HERAWAN, T., MAT KIAH, M.L. and AKIB, S., 2015. Soft-computing methodologies for precipitation estimation: a case study. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 8 (3), pp. 1353-1358. ISSN 1939-1404

SHAO, Y. and SU, D., 2015. An embedded sensory system for low-speed gearboxes. ZL 2012 1 0528026.4.

SHIBANI, M., 2015. An investigation into training needs and requirements for the technical staff within Libyan industrial companies. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 76-85. ISBN 9780957600980

SHIN, H.D., 2015. Five ways we can harness the original renewable energy source - human power. The Conversation.

SHRAHILY, R.Y., MEDJDOUB, B., KASHYAP, M. and CHALAL, M.L., 2015. Communication framework to support more effective onsite construction monitoring. In: L. MAHDJOUBI, C.A. BREBBIA and R. LAING, eds., Building Information Modelling (BIM) in design, construction and operations. Proceedings of BIM 2015, Bristol, 9 September 2015. WIT transactions on the built environment, 149 . Southampton: WIT Press, pp. 195-203. ISBN 9781845649142

SIENA, F., 2015. The development of a novel 'steerable' bougie to assist in airway management. In: World Airway Management Meeting WAMM2015, Dublin, Ireland, 12-14 November 2015.

SOAR, R., 2015. Part 1: a process view of nature. Multifunctional integration and the role of the construction agent. Intelligent Buildings International. ISSN 1750-8975

SOAR, R., 2015. Part 2: pushing the envelope. A process perspective for architecture, engineering and construction. Intelligent Buildings International. ISSN 1750-8975

SONG, B.-Y., XIE, Z.-J., ZHANG, F., WANG, R.-Z., HAO, M.-H. and SU, D.-Z., 2015. Fault diagnosis algorithm for helical gear rotating at low speed on angular domain synchronous average and order tracking analysis. Journal of Jilin University (Engineering and Technology Edition), 45 (2), pp. 454-459. ISSN 1671-5497

SOUTO, A., 2015. Neues Museum Berlin: completing the past with a minimalist intervention. Design architect David Chipperfield. The Architect: The Journal of the Sri Lanka Institute of Architects, 116 (4), pp. 151-154. ISSN 1391-5363

SOUTO, A., 2015. Pablo Bronstein. Nottingham: Nottingham Contemporary.

SOUTO, A., 2015. Photography dialogues. Constructing a space for remembrance. Bonington Gallery, Nottingham Trent University, Nottingham, 6 November - 4 December 2015.

SOUTO, A., 2015. Pressing issues of our time.

SU, D., 2015. Development of energy efficiency and environment friendly products [keynote lecture and panel/invited speech]. In: 2015 International Conference on Advances on Advances in Energy Resources and Environment Engineering, Daqing, China, 14-15 March 2015, Daqing, China.

SU, D., CASAMAYOR, J. and XU, X., 2015. Utilisation of a toolbox for computer aided development of LED lighting products. International Journal of Mechanical and Production Engineering (IJMPE), 3 (4), pp. 56-61. ISSN 2320-2092

SU, D. and PENG, W., 2015. Internet-based communication infrastructure for an eco-accounting system using web-based services and RFID technology. In: C. KERDPITAK, K. HEUER, E. SOLTANI and G. NARTEA, eds., Proceedings of the 2015 ICBTS International Academic Research Conference in Europe & America, University of Nevada, Las Vegas, United States, 15-18 September 2015. Pathumthanei, Thailand: Chayanan Kerdpitak (ICBTS Institute & CK research), pp. 67-73. ISBN 9786163825902

SU, D. and REN, Z., 2015. Gearbox life cycle assessment. In: 14th IFToMM World Congress, Taipei, Taiwan, 25-30 October 2015. Proceedings. Taiwan: National Taiwan University, pp. 276-285. ISBN 9789860460988

SULTANA, N., AKIB, S., AQEEL ASHRAF, M. and ROSELI ZAINAL ABIDIN, M., 2015. Quality assessment of harvested rainwater from green roofs under tropical climate. Desalination and Water Treatment, 57 (1), pp. 75-82. ISSN 1944-3994

SUN, M., BISWAS, H.K. and BOSCHÉ, F., 2015. Planning for scanning using building information models: a novel approach with occlusion handling. In: Proceedings of the 32nd International Symposium on Automation and Robotics in Construction and Mining (ISARC 2015): Connected to the Future. International Association for Automation and Robotics in Construction. ISBN 9781510809246

SUN, M., GEELHOED, E., CALEB-SOLLY, P. and MORRELL, A., 2015. Knowledge and attitudes of small builders toward sustainable homes in the UK. Journal of Green Building, 10 (2), pp. 215-233. ISSN 1552-6100

SUNG, K., 2015. Appropriate technology; renewable resource; source reduction; waste. In: C.D. EDWARDS, ed., The Bloomsbury encyclopedia of design. London: Bloomsbury. ISBN 9781472521576

SUNG, K., 2015. A review on upcycling: current body of literature, knowledge gaps and a way forward. In: The ICECESS 2015: 17th International Conference on Environmental, Cultural, Economic and Social Sustainability, Venice, Italy, 13-14 April 2015.

SUNG, K. and COOPER, T., 2015. Sarah Turner - eco-artist and designer through craft-based upcycling. Craft Research, 6 (1), pp. 113-122. ISSN 2040-4689

SUNG, K., COOPER, T. and KETTLEY, S., 2015. An exploratory study on the consequences of individual upcycling: is it worth making people feel attached to their upcycled products? In: College of Art, Design and the Built Environment Doctoral Conference 2015, Nottingham Trent University, Monday 8 June 2015 - Tuesday 9 June 2015.

SUNG, K., COOPER, T. and KETTLEY, S., 2015. An exploratory study on the links between individual upcycling, product attachment and product longevity. In: T. COOPER, N. BRAITHWAITE, M. MORENO and G. SALVIA, eds., Product Lifetimes and the Environment (PLATE) Conference proceedings, [Nottingham Trent University], Nottingham, 17-19 June 2015. Nottingham: Nottingham Trent University: CADBE, pp. 349-356. ISBN 9780957600997

TOKBOLAT, S., CALAY, R.K. and AL-ZUBAIDY, S., 2015. Renewable energy technologies and practices: prospective for building integration in cold climates (Kazakhstan). Journal of Renewable and Sustainable Energy, 7 (5): 053124.

TOKBOLAT, S. and KAUR CALAY, R., 2015. Residential construction sustainability in the UK and prospects of knowledge transfer to Kazakhstan. Journal of Sustainable Development, 8 (9), pp. 14-23. ISSN 1913-9063

UMWENI, O.J., 2015. Deployable structures in the built environment. In: M. SARSHAR DRISCOLL, A. IANAKIEV and B. SERTYESILISIK, eds., Contemporary Trends in the Regenerative and Sustainable Built Environment:Technical and Managerial Aspects: workshop proceedings: Novel Energy for the Regenerative Built Environment: Technical and Managerial Aspects, 3-6 March 2014, Istanbul Technical Uni. Nottingham: Nottingham Trent University: CADBE, pp. 62-70. ISBN 9780992887803

UMWENI, O.J., 2015. Structural assessment of deployable structures. In: M. HOXLEY and A. CRABBE, eds., CADBE Doctoral Student Conference [Nottingham Trent University, 9-10 June 2014]: 2014 proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 29-35. ISBN 9780957600980

VAHEESAN, K., CHANDRAKUMAR, C., MATHAVAN, S., KAMAL, K., RAHMAN, M. and AL-HABAIBEH, A., 2015. Tiled fuzzy Hough transform for crack detection. In: F. MERIAUDEAU and O. AUBRETON, eds., Proceedings of SPIE: Twelfth International Conference on Quality Control by Artificial Vision 2015, Le Creusot, France, 3 June 2015. SPIE, p. 953411. ISBN 9781628416992

VALENTE, A.C., DOMINGUES, A.R., SOARES, C., PRATA DIAS, G., CORREA, I., VAN DEN BOSSCHE, P. and RAMOS, T.B., 2015. Assessment of life-cycle skills and training needs in the renewable and energy efficiency sectors: wind energy, electric mobility, and smart grids sectors. In: CEDEFOP, and OECD, , eds., Green skills and innovation for inclusive growth. Cedefop reference series . Luxembourg: Publications Office of the European Union, pp. 33-51. ISBN 9789289618847

WATKINS, M.A., 2015. An audio-visual approach to teaching the social aspects of sustainable product design. FORMakademisk, 8 (1). ISSN 1890-9515

WATKINS, M.A., CRISP, A. and HARMER, L., 2015. Towards the chequered flag: a collaborative cross level engineering appreciation challenge for BSc Product Design students. In: G. BINGHAM, D. SOUTHEE, J. MCCARDLE, A. KOVACEVIC, E. BOHEMIA and B. PARKINSON, eds., DS82: Proceedings of the 17th International Conference on Engineering and Product Design Education (E&PDE15), Great Expectations: Design Teaching, Research & Enterprise. E&PDE . Bristol: The Design Society, pp. 75-80. ISBN 9781904670629

WHITE, M., 2015. Cyclical and structural change in the UK housing market. Journal of European Real Estate Research, 8 (1), pp. 85-103. ISSN 1753-9269

ZAFAR, T., KAMAL, K., KUMAR, R., SHEIKH, Z., MATHAVAN, S. and ALI, U., 2015. Tool health monitoring using airborne acoustic emission and a PSO-optimized neural network. In: P. JĘDRZEJOWICZ, N.T. NGUYEN, T.-P. HONG and I. CZARNOWSKI, eds., Proceedings of the 2015 IEEE 2nd International Conference on Cybernetics (CYBCONF), Gdynia, Poland, 24-26 June. Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE), pp. 271-276. ISBN 9781479983223

ZAFAR, T., KAMAL, K., SHEIKH, Z., MATHAVAN, S., JEHANGHIR, A. and ALI, U., 2015. Tool health monitoring for wood milling process using airborne acoustic emission. In: Q.-S. JIA, M.P. FANTI, D. POPA and C. SEATZU, eds., Proceedings of the 2015 IEEE International Conference on Automation Science and Engineering (CASE), Gothenburg, Sweden, 24-28 August 2015. Piscataway, NJ: Institute of Electrical and Electronic Engineers (IEEE), pp. 1521-1526. ISBN 9781467381840

ZHOU, G., SINGH, J., WU, J., SINHA, R., LAURENTI, R. and FROSTELL, B., 2015. Evaluating low-carbon city initiatives from the DPSIR framework perspective. Habitat International, 50, pp. 289-299. ISSN 0197-3975

VON GEIBLER, J., RIERA, N., ECHTERNACHT, L., BJÖRLING, S.E., DOMEN, T., DUPONT, E., HERMENIER, R., JENKINS, A., KIMMEL, A., KRESSE, S., KÜHNDEL, F., LIEDTKE, C., MOSTYN, R., PENG, W., PESCIO, E., REN, Z., SCHALLER, S., SMITH, J., STEVENS, G., SU, D., WERNER, M., WIESEN, K. and WU, Y., 2015. MyEcoCost - forming the nucleus of a novel environmental accounting system: vision, prototype and way forward. Wuppertal Spezial, 50 . Wuppertal: Wuppertal Inst. for Climate, Environment and Energy. ISBN 9783929944976