Items where Author is "Su, D"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 269.

Journal article

PENG, W., SU, D. and HIGGINSON, M., 2019. A novel remote control system for air conditioning in low carbon emission buildings using sensor fusion and mobile communication technologies. Building and Environment, 148, pp. 701-713. ISSN 0360-1323

SHANG, Z., WANG, M., SU, D., LIU, Q. and ZHU, S., 2018. Ontology based social life cycle assessment for product development. Advances in Mechanical Engineering, 10 (11). ISSN 1687-8140

CASAMAYOR, J.L., SU, D. and REN, Z., 2017. Comparative life cycle assessment of LED lighting products. Lighting Research & Technology. ISSN 1477-1535

DU, X., SU, D., LI, J. and WANG, Z., 2017. Effects of microbus front structure on pedestrian head injury. International Journal of Design Engineering, 7 (1), pp. 54-75. ISSN 1751-5874

DU, X., SU, D. and WANG, Z., 2017. Motion state recognition of debris ejected in vehicular collision after contact with the ground. International Journal of Materials and Product Technology, 54 (4), pp. 332-346. ISSN 0268-1900

SHAO, Y., SU, D., AL-HABAIBEH, A. and YU, W., 2016. A new fault diagnosis algorithm for helical gears rotating at low speed using an optical encoder. Measurement, 93, pp. 449-459. ISSN 0263-2241

IRHOMA, A., SU, D. and HIGGINSON, M., 2016. Analysis and evaluation of the environmental impacts of upstream petroleum operations. International Journal of Manufacturing Technology and Management, 30 (1/2), pp. 116-142. ISSN 1368-2148

PENG, W. and SU, D., 2016. Internet-based remote monitoring system of thermo-electric-generations with mobile communication technology. International Journal of Materials and Product Technology, 53 (2), p. 154. ISSN 0268-1900

SAAD, A., SU, D., MARSH, P. and WU, Z., 2016. National Environmental Factors for Implementing Total Quality Environmental Management in the Libyan Food Industry. British Journal of Economics, Management & Trade, 11 (4), p. 23182. ISSN 2278-098X

CASAMAYOR, J., SU, D. and SARSHAR, M., 2015. Extending the lifespan of LED-lighting products. Architectural Engineering and Design Management, 11 (2), pp. 105-122. ISSN 1745-2007

SAAD, A., SU, D., MARSH, P. and WU, Z., 2015. Investigating environmental management and quality management issues in the Libyan food industry. British Journal of Economics, Management & Trade, 9 (3), pp. 1-16. ISSN 2278-098X

SU, D., CASAMAYOR, J. and XU, X., 2015. Utilisation of a toolbox for computer aided development of LED lighting products. International Journal of Mechanical and Production Engineering (IJMPE), 3 (4), pp. 56-61. ISSN 2320-2092

REN, Z. and SU, D., 2014. Comparison of different life cycle impact assessment software tools. Key Engineering Materials, 572, pp. 44-49. ISSN 1013-9826

PENG, W. and SU, D., 2014. Development of an online system for recycling consumer electronic products using the Internet, NFC and RFID technologies. Key Engineering Materials, 572, pp. 90-101. ISSN 1013-9826

VON GEIBLER, J., WIESEN, K., MOSTYN, R.S., WERNER, M., RIERA, N., SU, D., BJÖRLING, S.E., DOMEN, T., SMITH, J., JENKINS, A. and KRESSE, S., 2014. Forming the nucleus of a novel ecological accounting system: the myEcoCost approach. Key Engineering Materials, 572, pp. 78-83. ISSN 1013-9826

IRHOMA, A., SU, D. and HIGGINSON, M., 2014. Life cycle assessment of Libyan crude oil. International Symposium on Sustainable Systems and Technologies (ISSST), 19-21 May 2014, 2. ISSN 2329-9169

SAAD, A., SU, D., MARSH, P. and WU, Z., 2014. Total quality environmental management toward sustainability: need and implementation in Libyan food industry. Key Engineering Materials, 572, pp. 84-89. ISSN 1013-9826

YASEEN, S., AL-HABAIBEH, A., SU, D. and OTHAM, F., 2013. Real-time crowd density mapping using a novel sensory fusion model of infrared and visual systems. Safety Science, 57, pp. 313-325. ISSN 0925-7535

IRHOMA, A., SU, D. and HIGGINSON, M., 2013. Analysis of the barriers to environmental management systems implementation in the Libyan oil industry. Key Engineering Materials, 572, pp. 672-677. ISSN 1662-9795

CHEN, Z., SHAO, Y. and SU, D., 2013. Dynamic simulation of planetary gear set with flexible spur ring gear. Journal of Sound and Vibration, 332 (26). ISSN 0022-460X

CASAMAYOR, J.L. and SU, D., 2013. Integration of eco-design tools into the development of eco-lighting products. Journal of Cleaner Production, 47, pp. 32-42. ISSN 0959-6526

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2013. Investigating the design of condition monitoring systems to evaluate surface roughness under the variability in tool wear and fixturing conditions. Key Engineering Materials, 572, pp. 467-470. ISSN 1662-9795

ALKHADAFE, H., AL-HABAIBEH, A., LOTFI, A. and SU, D., 2012. Optimising sensor location for an enhanced gearbox condition monitoring system. Journal of Physics: Conference Series, 364. ISSN 1742-6596

SU, D. and PENG, W., 2011. Application of PDA and wireless technology in a server-client structure for remote machine condition monitoring. Key Engineering Materials, 450, pp. 449-452.

SONG, B., XIE, Z., SU, D., ZHANG, F. and ZHAO, Q., 2011. Development of a life test platform for bearings lubricated by solid lubricant under the vacuum and temperature cycling environment. Key Engineering Materials, 486, pp. 21-24.

SU, D. and ZEN, R., 2011. Ecological impact assessment and eco-design of industrial gearboxes. Key Engineering Materials, 486, pp. 197-200.

CASAMAYOR, J. and SU, D., 2011. Environmental impact assessment of lighting product. Key Engineering Materials, 486, pp. 171-174.

REDGATE, J., AL-HABAIBEH, A., SU, D., WILMHURST, T. and RUDD, J., 2011. Evaluation of component reliability using data derived from infrared thermography. Key Engineering Materials, 450, pp. 275-278.

YIN, J., QU, J., SONG, B. and SU, D., 2011. Influence of nano-calcium carbonate on friction properties of titanium complex grease. Key Engineering Materials, 486, pp. 159-162.

YIN, J., QU, J., SONG, B. and SU, D., 2011. Influence of nano-silica on friction and noise properties of urea grease. Key Engineering Materials, 450, pp. 189-193.

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2011. Sensor fusion for condition monitoring system of end milling operations. Key Engineering Materials, 450, pp. 267-270.

HOU, J. and SU, D., 2011. Web-oriented system supporting small-medium sized manufactures. Key Engineering Materials, 450, pp. 409-412.

PENG, W. and SU, D., 2011. The development of a novel control system of solid desiccant dehumidifier for air conditioning in low carbon emission building. Key Engineering Materials, 486, pp. 81-86.

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2011. The effect of tool fixturing quality on the design of condition monitoring systems for detecting tool conditions. JJMIE - Jordan Journal of Mechanical and Industrial Engineering, 5 (1), pp. 17-22. ISSN 1995-6665

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2011. The investigation of prediction surface roughness from machining forces in end milling processes. Key Engineering Materials, 486, pp. 91-94.

SONG, B., YANG, Q., QI, Y. and SU, D., 2011. The mechanochemistry of synthetic phosphate oil under high pressure. Key Engineering Materials, 450, pp. 185-188.

YIN, J., QU, J., SONG, B. and SU, D., 2010. Friction and wear behavior of titanium complex grease with admixture base oil. Key Engineering Materials, 419420, pp. 57-60. ISSN 1013-9826

ZHAO, Y.J., SU, D., WEI, W., DONG, X. and ZHOU, J., 2010. Lubrication characteristics of dual-tori double-enveloping toroidal worm drive. Tribology Transactions, 53 (2), pp. 266-273. ISSN 1040-2004

ZHAO, Y., SU, D. and ZHANG, Z., 2010. Meshing analysis and technological parameters selection of dual tori double-enveloping toroidal worm drive. Mechanism and Machine Theory, 45 (9). ISSN 0094-114X

SU, D. and PENG, W., 2010. Remote machine condition monitoring using wireless computing technology. Key Engineering Materials, 419420, pp. 745-748. ISSN 1013-9826

SONG, B., YANG, Q., ZHANG, F. and SU, D., 2010. Rheological properties of aircraft grease containing nano-additives. Key Engineering Materials, 419420, pp. 53-56. ISSN 1013-9826

ZHENG, Y., REN, Z., SU, D. and ARTHUR, L., 2010. Semantic similarity based on ontology technology and its application in mobile information retrieval for product design. Key Engineering Materials, 419420, pp. 741-744. ISSN 1013-9826

AL-HABAIBEH, A., SU, D., MCCAGUE, J. and KNIGHT, A., 2010. An innovative approach for energy generation from waves. Energy Conversion and Management, 51 (8), pp. 1664-1668. ISSN 0196-8904

ZHAO, Y., SU, D., WEI, W. and DONG, X., 2010. A meshing principle for generating a cylindrical gear using an Archimedes hob with two degrees of freedom. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (1), pp. 169-181. ISSN 0954-4062

HU, Y., LI, B., SU, D. and HU, H., 2008. Dynamic design for a novel parallel kinematic machine with passive linkage. Key Engineering Materials, 364366, pp. 1037-1042. ISSN 1013-9826

LI, J. and SU, D., 2008. Support modules and system structure of Web-enabled collaborative environment for design and manufacture. International Journal of Production Research, 9 (49), pp. 2397-2412.

SU, D., XIONG, Y., ZHENG, Y. and JI, S., 2008. A framework for collaborative working environment. International Journal of Production Research, 9 (49), pp. 2363-2381.

HOU, J. and SU, D., 2007. EJB-MVC oriented supplier selection system for mass customisation. Journal of Manufacturing Technology Management, 18 (1), pp. 54-71.

HOU, J. and SU, D., 2007. Service and components oriented environment for conducting product design specification. Lecture Notes in Computer Science [Revised selected papers], 4402, pp. 530-539. ISSN 0302-9743

XIONG, Y. and SU, D., 2007. Wrapping legacy applications into grid services: a case study of a three services approach. Lecture Notes in Computer Science [Revised selected papers], 4402, pp. 520-529. ISSN 0302-9743

HOU, J. and SU, D., 2007. A customer-manufacturer-competitor orientation model for product life cycle analysis based on QFD, AHP/ANP and TRIZ. International Journal of Design Engineering, 1 (1), pp. 104-124. ISSN 1751-5874

HOU, J. and SU, D., 2007. A customer-manufacturer-competitor orientation model for product life cycle analysis based on QFD, AHP/ANP and TRIZ. International Journal of Design Engineering, 1 (1), pp. 104-124. ISSN 1751-5874

SU, D., LI, J., YU, X. and ZHENG, Y., 2006. Collaborative design and manufacture supported by multiple Web/Internet techniques. Lecture Notes in Computer Science [Revised selected papers], 3865, pp. 483-492. ISSN 0302-9743

SU, D., 2006. EU-China collaboration in design: research in Web-enabled collaborative design supported by the Asia-Link and Asia IT&C projects. The Journal of Designing in China (2), pp. 110-118.

HOU, J. and SU, D., 2006. Integration of Web-based techniques and business strategies into the development of a network supported system for supplier selection. International Journal of Computers in Industry.

JI, S., SU, D. and LI, J., 2006. Integration, management and communication of heterogeneous design resources with WWW technologies. , pp. 414-423. ISSN 0302-9743

XIONG, Y. and SU, D., 2006. A Web-service based approach for software sharing. Lecture Notes in Computer Science [Revised selected papers], 3865, pp. 215-224. ISSN 0302-9743

JIANG, H., XIA, Y., SU, D. and BELOUKOF, A.E., 2005. Analysis of infiltrative characteristics of deformable porous metal rubber material and parameters identification. Chinese Journal of Mechanical Engineering, 18 (4), pp. 562-565. ISSN 1000-9345

SU, D., LI, J. and JI, S., 2005. Online collaborative design within a Web-enabled environment. Lecture Notes in Computer Science, 3168, pp. 211-220. ISSN 0302-9743

ZHONG, S., DING, G. and SU, D., 2005. Parallel feedforward process neutral networks with time-varied input and output functions. Lecture Notes in Computer Science [Revised selected papers], 3496, pp. 473-478. ISSN 0302-9743

AMIN, N. and SU, D., 2003. Enhancement of speed and efficiency of an Internet based gear design optimisation. International Journal of Automotive Technology and Management, 3 (34), pp. 279-292. ISSN 1470-9511

SU, D., JI, S., AMIN, N. and HULL, B.N., 2003. Multi-user Internet environment for gear design optimization. Integrated Manufacturing Systems, 14 (6), pp. 498-507. ISSN 0957-6061

SU, D. and CHEN, X., 2003. Network support for integrated design. Integrated Manufacturing Systems, 14 (6), pp. 537-546. ISSN 0957-6061

SU, D. and CHEN, X., 2003. Network support for integrated design. Integrated Manufacturing Systems, 14 (6), pp. 537-546. ISSN 0957-6061

SU, D., CHEN, B., QIN, D., CHEN, X., PENG, Z. and WANG, J., 2002. Theoretical and experimental investigation of cylindrical involute worm gear drive's elastic mesh, manufacturing simulation and related techniques. Chinese Journal of Mechanical Engineering, 38.

SU, D. and AMIN, N., 2001. A CGI-based approach for remotely executing a large program for integration of design and manufacture over the Internet. International Journal of Computer Integrated Manufacturing, 14 (1), pp. 55-65. ISSN 0951-192X

SU, D. and AMIN, N., 2001. A CGI-based approach for remotely executing a large program for integration of design and manufacture over the Internet. International Journal of Computer Integrated Manufacturing, 14 (1), pp. 55-65. ISSN 0951-192X

SU, D., YANG, F. and GENTLE, C.R., 2001. Finite element modelling and load share analysis for involute worm gears with localised tooth contact. Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, 215, pp. 805-816.

SU, D., QIN, D. and WANG, H., 2001. Fuzzy control strategies for driving simulation of traction drive CVT control. International Journal of Gearing and Transmissions (3), pp. 168-174.

SU, Z. and SU, D., 2001. Hybrid system of expert system and artificial neural networks for objective evaluation of product sensuous quality. Inzenyrska Mechanika, 8 (4), pp. 105-112. ISSN 1210-2717

SU, D., SONG, Y. and GENTLE, C.R., 2001. Three-dimensional loaded multi-tooth contact analysis of spiroid gears. International Journal of Gearing and Transmissions (3), pp. 83-90.

SU, D., YANG, F. and GENTLE, C.R., 2000. Analysis of tooth stresses, mesh stiffness and loaded transmission errors of involute worm gears. International Journal of Gearing and Transmissions (3), pp. 36-44.

SU, D., WAKELAM, M. and JAMBUNATHAN, K., 2000. Integration of knowledge-based system, artificial neural networks and multimedia for gear design. Journal of Material Processing Technology, 107 (13), pp. 53-59.

SU, D., SONG, Y. and GENTLE, C.R., 2000. Numerical analysis of spiroid gears with localised tooth contact manufactured by a new economic method. International Journal of Gearing and Transmissions (3), pp. 38-46.

SU, Z. and SU, D., 2000. A new model for leather quality test. Journal of the Society of Leather Technologists and Chemists, 84, pp. 122-126.

SU, Z. and SU, D., 1999. Analysis of the thermocouple signal stability in a grinding contact zone. Journal of Engineering Mechanics, 6 (1), pp. 63-70. ISSN 0733-9399

SU, D., 1999. Design automation with the aids of multiple artificial intelligent techniques. Concurrent Engineering - Application and Research Journal, 7 (1), pp. 23-30.

SU, D. and WAKELAM, M., 1999. Evolutionary optimization within an intelligent hybrid system for design integration. Artificial Intelligence for Engineering Design, Analysis and Manufacturing Journal, 13 (5), pp. 351-363. ISSN 0890-0604

YANG, F. and SU, D., 1999. Software review 'MathCAD 8 Professional'. Journal of Software for Engineering Education (15), pp. 26-27.

SU, D. and GOLISKI, D.I., 1999. A computer aided design and learning package and its implementation on the Internet. Journal of Software for Engineering Education (16), pp. 11-15.

SU, D. and WAKELAM, M., 1998. Intelligent hybrid system for integration in design and manufacture. Journal of Material Processing Technology, 76, pp. 23-28.

SU, D., YAN, F. and GENTLE, C.R., 1998. Optimum design of worm gearing with localised tooth contact. International Journal of Gearing and Transmissions (1), pp. 6-19.

REN, M., AL-DABASS, D. and SU, D., 1998. A three-layer hierarchy for off-line recognition of Chinese characters. The International Journal of Computer Processing of Oriental Languages (CPOL), 11 (4), pp. 409-426. ISSN 1027-7676

WANG, Z.M., EZUGWU, E.O. and SU, D., 1997. Advance in precision machining of small deep holes. Journal of Material Processing Technology, 68 (3), pp. 257-261.

REN, M., AL-DABASS, D. and SU, D., 1996. Using a syntactic method to partition a Chinese character. The Caledonian International Engineering Journal, 96 (1), pp. 51-60.

SU, D., HENTHORN, K., JAMBUNATHAN, K. and WAKELAM, M., 1996. A rule-based and artificial neural network system for conceptual design. Journal of the INGENIUM, 96 (1), pp. 1-8.

SU, D. and HONGYE, W.U., 1987. Numerical analyses of the undercutting line of ZK wormgearing. Journal of Gears, 1.

SU, D. and HONGYE, W.U., 1986. Numerical calculation of the scuffing locus of ZK wormgear. Journal of Modern Machinery, 4, pp. 20-26.

SU, D. and HONGYE, W.U., 1986. A numerical method to calculate the instantaneous total length of contact lines of worm gearing. Journal of Modern Machinery, 3, pp. 8-12.

SU, D. and HONGYE, W.U., 1986. A numerical method to solve the set of transcendental equations of the meshing principles of worm gearing. Journal of Harbin Institute of Technology, 3.

SU, D. and HONGYE, W.U., 1983. The study of induced curvature of cylindrical worm gearing with nonlinear surface. Journal of Machinery, 4, pp. 1-5.

SU, D. and HONGYE, W.U., 1982. The meshing theory of cylindrical worm gearing with nonlinear surface. Chinese Journal of Mechanical Engineering, 18 (4), pp. 31-42.

Authored book

VON GEIBLER, J., RIERA, N., ECHTERNACHT, L., BJÖRLING, S.E., DOMEN, T., DUPONT, E., HERMENIER, R., JENKINS, A., KIMMEL, A., KRESSE, S., KÜHNDEL, F., LIEDTKE, C., MOSTYN, R., PENG, W., PESCIO, E., REN, Z., SCHALLER, S., SMITH, J., STEVENS, G., SU, D., WERNER, M., WIESEN, K. and WU, Y., 2015. MyEcoCost - forming the nucleus of a novel environmental accounting system: vision, prototype and way forward. Wuppertal Spezial, 50 . Wuppertal: Wuppertal Inst. for Climate, Environment and Energy. ISBN 9783929944976

SU, D. and ZHU, S., 2006. Proceedings of the International Conference on Advanced Design and Manufacture (ADM2006): 8th-10th January, 2006, Harbin, China. Nottingham: ADMEC. ISBN 1842331183

SU, D., 2005. Web-based collaborative design and manufacture: literature review, research and development. Nottingham: EU Asia IT&C- WECIDM. ISBN 1842331140

SU, D., 2000. Internet-based engineering: Applications and case studies. Nottingham: Nottingham Trent University. ISBN 1842330217

SU, D., 2000. Proceedings of the International Conference on Gearing, Transmissions and Mechanical Systems. Professional Engineering Publishing. ISBN 1860582605

SU, D., CARDEN, P.J. and DRUCE, G., 1993. Contact stress in disc cams with roller followers. 93001 (Ringbound). London: ESDU International PLC. ISBN 0856798436

SU, D., CARDEN, P.J. and DRUCE, G., 1991. 'Analysis of cam roller followers 921026 (Ring-bound)'. London: ESDU International PLC. ISBN 085679788X

Chapter in book

WU, Y., SU, D., PENG, W. and ZHANG, Q., 2017. Application of lifecycle assessment and finite element analysis in the design of raised access floor products. In: E. OÑATE, D.R.J. OWEN, D. PERIC and M. CHIUMENTI, eds., Proceedings of the XIV International Conference on Computational Plasticity - Fundamentals and Applications (COMPLAS 2017), Barcelona, Spain, 5-7 September 2017. Barcelona: International Center for Numerical Methods in Engineering (CIMNE), pp. 806-814. ISBN 9788494690969

SU, D. and WU, Y., 2016. Sustainable technologies and their alication in industrial gearbox development. In: D. QIN and Y. SHAO, eds., Power engineering. Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016), Chongqing, P.R. China, 27–30 Octoberober 2016. London: CRC Press, pp. 849-858. ISBN 9781138032675

WANG, S., SU, D. and ZHU, S., 2016. A comparative study on life cycle assessment of typical wood base furniture. In: Proceedings of the 2016 5th International Conference on Sustainable Energy and Environment Engineering (ICSEEE 2016), Zhuhai, China, November 12-13 2016. Advances in engineering research, 63 . Amsterdam: Atlantis Press, pp. 634-640. ISBN 9789462522787

SU, D. and REN, Z., 2015. Gearbox life cycle assessment. In: 14th IFToMM World Congress, Taipei, Taiwan, 25-30 October 2015. Proceedings. Taiwan: National Taiwan University, pp. 276-285. ISBN 9789860460988

SU, D. and PENG, W., 2015. Internet-based communication infrastructure for an eco-accounting system using web-based services and RFID technology. In: C. KERDPITAK, K. HEUER, E. SOLTANI and G. NARTEA, eds., Proceedings of the 2015 ICBTS International Academic Research Conference in Europe & America, University of Nevada, Las Vegas, United States, 15-18 September 2015. Pathumthanei, Thailand: Chayanan Kerdpitak (ICBTS Institute & CK research), pp. 67-73. ISBN 9786163825902

SU, D. and PENG, W., 2014. Internet-based inter-operation infrastructure for data management within an ecological accounting system. In: International Conference on Computer Science and Software Engineering (CSSE 2014), Hangzhou, China, 18-19 October 2014. Lancaster, PA: DEStech Publications Inc., pp. 759-765. ISBN 9781605951997

REN, Z., ARTHUR, L. and SU, D., 2010. Advances in sustainable production: a literature review. In: S. BANDYOPADHYAY, ed., College Conference: Re-defining Research, 8 July 2010: conference proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 96-103. ISBN 9780957600904

PENG, W. and SU, D., 2010. Development of the control system of the solid desiccant dehumidifier for air-conditioning. In: S. BANDYOPADHYAY, ed., College Conference: Re-defining Research, 8 July 2010: conference proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 88-95. ISBN 9780957600904

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2010. Using multi-sensor system for condition monitoring system of machining operations. In: S. BANDYOPADHYAY, ed., College Conference: Re-defining Research, 8 July 2010: conference proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 46-53. ISBN 9780957600904

ELGARGNI, M., AL-HABAIBEH, A., LOTFI, A. and SU, D., 2010. The application of infrared and visual image processing in condition monitoring systems of manufacturing processes. In: S. BANDYOPADHYAY, ed., College Conference: Re-defining Research, 8 July 2010: conference proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 54-58. ISBN 9780957600904

SU, D. and PENG, W., 2008. Optimum design of worm gears with multiple computer aided techniques. In: H. MURAKAVA, ed., Proceedings of International Conference on Computational and Experimental Engineering and Sciences (ICCES'08). UNSPECIFIED, pp. 575-581. ISBN 0971788057; 9780971788053

HOU, J. and SU, D., 2007. Enterprise JavaBeans supporting manufacturer centralised model. In: Proceedings of the 4th International Conference on Responsive Manufacturing (ICRM2007). UNSPECIFIED, pp. 530-539. ISBN 9780853582397

AL-AZMI, A., AL-HABAIBEH, A. and SU, D., 2006. Modern developments in condition monitoring systems of machining processes - a literature survey. In: Proceedings of the International Conference on Advanced Design and Manufacture. UNSPECIFIED. ISBN 1842331183

REDGATE, J., AL-HABAIBEH, A. and SU, D., 2006. Simulink model of electric vehicle for maximum efficiency operation. In: Proceedings of the International Conference on Advanced Design and Manufacture. UNSPECIFIED, pp. 791-795. ISBN 1842331183

SU, D., LI, J. and JI, S., 2005. Online collaborative design within a Web-enabled environment. In: W. SHEN, ed., Computer Supported Cooperative Work in Design: 8th International Conference, CSCWD 2004, Xiamen, China, May 26-28, 2004, Revised selected papers.Papers: v. 1 (Lecture notes in computer science). Berlin; Heidelberg: Springer-Verlag GmbH & Co. K, pp. 211-220. ISBN 3540294007

SU, D. and LI, J., 2005. Remote execution of large size programs. In: Web-based collaborative design and manufacture: literature review, research and development. Nottingham: EU Asia IT&C- WECIDM, pp. 102-117. ISBN 1842331140

XIONG, Y., LIU, J., FITZGERALD, P. and SU, D., 2005. Service oriented software package bank. In: Proceedings of the Ninth International Conference on Computer Supported Cooperative Work in Design. Piscataway, NJ, USA: IEEE, pp. 661-666. ISBN 1846000025

SU, D. and LI, J., 2005. Web-enabled collaborative environment. In: Web-based collaborative design and manufacture: literature review, research and development. Nottingham: EU Asia IT&C- WECIDM, pp. 1-28. ISBN 1842331140

SU, D., 2001. Development of network supported collaboration for design and manufacture. In: International Conference on Electronic Commerce Engineering: New Challenges for Global Manufacturing in the 21st Century, Xi'an, China, 16-18 September 2001. China Machine Press. ISBN 7900066543

SU, D. and AMIN, N., 2000. Gear design optimisation over the Internet. In: D. SU, ed., Internet-based engineering- application and case studies. Nottingham: Nottingham Trent University in association with Professional Engineering Publishing Ltd., pp. 61-80. ISBN 1842330217

AMIN, N. and SU, D., 1999. Development of Internet-based approach for optimising gear design in a multi-user environment. In: P.K. CHAWDHRY, ed., Advances in concurrent engineering. Pennsylvania: Technomic, pp. 368-374.

SU, D., WAKELAME, M., HENTHORN, K.S. and JAMBUNATHAN, K., 1999. A software package for evolutionary optimisation of gear design. In: P. BENTLEY, ed., Evolutionary design by computers. San Francisco: Morgan Kaufmann Publishers. ISBN 155860605X

REN, M., AL-DABASS, D. and SU, D., 1996. A three-layer hierarchy for representing Chinese characters. In: J.L. NEALON and J. HUNT, eds., Research and development in expert systems. Proceedings of Expert Systems 96: the 16th Annual International Conference of the British Computer Society Specialist Group on Expert Systems, Cambridge, 16-18 December 1996. UNSPECIFIED, pp. 137-146. ISBN 189962113X

WANG, Z.M., EZUGWU, E.O. and SU, D., 1994. Deep hole precision-machining method of difficult-to-cut materials. In: E. USUI, ed., Advancement of intelligent production. Elsevier Science, pp. 437-441.

SU, D., 1994. Effects of design-kinematic parameters on loading capacity of disc cams with the translating followers. In: G.R. PENNOCK, ed., Machine elements and machine dynamics. American Society of Mechanical Engineers, pp. 541-546.

SU, D. and JAMBUNATHAN, K., 1994. A prototype knowledge-based integrated system for power transmission design. In: E. USUI, ed., Advancement of intelligent production. Elsevier Science, pp. 45-50.

SU, D., 1993. Application of a knowledge based, integrated-system approach to the conceptual design of a power transmission system. In: W. KUO, ed., Quality through engineering design: Proceedings of the Conference, Bangalore, India, 11-14 January 1993 (Advances in Industrial Engineering). Elsevier Science Publishers B.V., pp. 417-427.

Conference contribution

SU, D., 2016. Integration of sustainable technologies into the development of LED lighting products. In: 'The Lightbulb Moment: Lighting Success Stories’ of Edie.Live, NEC, Birmingham, 17-18 May 2016.

SU, D., 2015. Development of energy efficiency and environment friendly products [keynote lecture and panel/invited speech]. In: 2015 International Conference on Advances on Advances in Energy Resources and Environment Engineering, Daqing, China, 14-15 March 2015, Daqing, China.

SU, D., 2014. Snow sculpture and internationalisation [invited speech]. In: 2nd International Symposium on Ice and Snow Sculpture Art and Education, Harbin, China, 5 January 2014, Harbin, China.

SU, D., 2014. Sustainable product design and its application in mechanical transmission [keynote speech]. In: International Symposium on ‘Theory and Practice of Gearing’, Izhevsk, Russia, 21-23 January 2014, Izhevsk, Russia.

SU, D., 2014. The integration of art, science and students’ international experience via participation in snow sculpture competitions. In: 9th International Conference on The Arts in Society, Rome, Italy, 25-27 June 2014, Rome.

IRHOMA, A., SU, D. and HIGGINSON, M., 2013. Analysis of the barriers to environmental management systems implementation in the Libyan oil industry. In: 5th International Advanced Design and Manufacture Conference, Valencia, Spain, 25-28 September 2013, Valencia.

SU, D., 2013. Enhancing internationalization by participating in Harbin snow sculpture competitions. In: Proceedings of the First International Symposium on Ice and Snow Sculpture Art and Education, Harbin, China.

WERNER, M. and SU, D., 2013. Environmental accounting [special session]. In: 5th International Conference on Advanced Design and Manufacture (ADM2013), Valencia, Spain, 25-28 September 2013, Valencia, Spain.

SALVIA, G., SU, D. and REN, Z., 2013. Life Cycle Assessment on application scenarios for ecoCost calculation method. In: 5th International Conference on Advanced Design and Manufacture (ADM), Valencia, Spain, 2013, Valencia, Spain.

COSTA, J., SU, D. and CASAMAYOR, J., 2013. Sustainable lighting [special session]. In: 5th International Conference on Advanced Design and Manufacture (ADM2013), Valencia, Spain, 25-28 September 2013, Valencia, Spain.

SU, D., 2013. Sustainable product development [keynote speech]. In: International Conference on Frontiers of Environment, Energy and Bioscience, Beijing, China, 24-25 October 2013, Beijing, China.

SU, D. and CASAMAYOR, J.L., 2012. Green lighting product design with a life assessment approach [abstract reader]. In: Joint International Conference Electronics Goes Green 2012+, Berlin, 9-12 September 2012, Berlin.

CASAMAYOR, J.L. and SU, D., 2011. Eco-design of lighting products: a study about integration of detailed/screening LCA software-based tools into design processes. In: Ecodesign 2011: 7th Symposium on Environmentally Conscious Design and Inverse Manufacturing, Kyoto, Japan, 30 November - 2 December 2011.

SU, D. and PENG, W., 2011. Online gearbox condition monitoring supported by wireless communication techniques. In: 13th World Congress in Mechanism and Machine Science, Guanajuato, México, 19-25 June 2011, Guanajuato, México.

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2011. Sensor fusion for condition monitoring system of end milling operations. In: Proceedings of the 3rd International Conference on Advanced Design and Manufacture (ADM2010), Nottingham.

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2011. The investigation of prediction surface roughness from machining forces in end milling processes. In: Proceedings of the 4th International Conference on Advanced Design and Manufacture (ADM2011), Kunming.

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2010. The effect of tool fixturing quality on the design of condition monitoring systems for detecting tool conditions. In: Seventh Jordanian International Mechanical Engineering Conference (JIMEC’7), Amman, Jordan, 27-29 September 2010.

ZHENG, Y.J., REN, Z.M., SU, D. and ARTHUR, L., 2009. Semantic similarity based on ontology technology and its application in mobile information retrieval for product design. In: 2nd International Conference on Advanced Design and Manufacture (ADM 2009), Harbin, China, 24-26 September 2009, Harbin, China.

AL-HABAIBEH, A., SU, D. and ARMAN, H., 2009. An innovative approach for research-informed product design teaching using wave energy generation case study. In: Proceedings of The International Ocean Energy Symposium 2009, Harbin, China.

ZHENG, Y., ARTHUR, L., LI, C. and SU, D., 2008. Collaborative design within an agent-based mobile environment. In: Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing, Tianjin, China.

SU, D., 2008. Teaching and research in engineering/product design [keynote speech]. In: National Symposium on Higher Education in Mechanical Design, Harbin, China, 22-24 July 2008, Harbin, China.

SU, D. and ZHENG, Y., 2008. Utilization of the collaborative working environment for online computer aided mechanical design [keynote speech]. In: 13th International Conference on Machine Design and Production (UMTIK 2008), Istanbul, Turkey, 3-5 September 2008, Istanbul.

AL-HABAIBEH, A., SU, D., MCCAGUE, J. and KNIGHT, A., 2008. An innovative approach for energy generation from waves. In: Proceedings of the Global Conference on Renewables and Energy Efficiency for Desert Regions, Jordan.

SU, D., SONG, Y., QIN, D. and PENG, Z., 2007. Computer aided design and analysis and experimental investigation of cylindrical involute worm gear drives. In: Proceedings of the 11th World Congress in Mechanism and Machine Science (IFToMM2003), Tianjin, China.

SU, D., XIONG, Y., JI, S., ZHENG, Y. and LI, J., 2006. EU Asia IT&C and Asia-Link programmes supported research in web-based collaborative work environment and its further development. In: Proceedings of the International Conference on Advanced Design and Manufacture, Harbin, China.

SU, D., JI, S. and LI, J., 2006. Gear design optimisation with a variable penalty function. In: Proceedings of the International Conference on Advanced Design and Manufacture, Harbin, China.

SU, D. and JOHNSON, P., 2006. Higher education in product design. In: Industrial Design Education Conference, Harbin, China.

SU, D., JI, S. and LI, J., 2006. Improved chromosome encoding for genetic algorithm of gear design. In: Proceedings of the International Conference on Advanced Design and Manufacture, Harbin, China.

SU, D. and JI, S., 2006. Integrated worm design on distributed heterogeneous system. In: Proceedings of the International Conference on Internet Computing, Las Vegas.

SU, D. and LI, J., 2006. Integrating model and hierarchical management of design resources on the Web-enabled environment. In: Proceedings of the International Conference on Advanced Design and Manufacture, Harbin, China.

HOU, J. and SU, D., 2006. Manufacturer centralised environment for product life cycle analysis, supplier selection and knowledge allocation. In: Proceedings of the International Conference on Mechanical Transmissions.

SU, D. and HOU, J., 2006. Modularised product design specification within the Web-services environment. In: Proceedings of the International Conference on Advanced Design and Manufacture, Harbin, China.

SU, D., ZHENG, Y. and JOHNSON, P., 2006. Review of Web-based collaborative project design. In: Proceedings of the International Conference on Advanced Design and Manufacture, Harbin, China.

SU, D., HOU, J. and XIONG, Z., 2006. Strategic supplier selection model for mass customisation. In: Proceedings of the International Conference on Advanced Design and Manufacture, Harbin, China.

SU, D., NIE, J. and XIONG, Z., 2006. A cooperative advertising investment model in assembly supply chain with multiple suppliers. In: Proceedings of the International Conference on Advanced Design and Manufacture, Harbin, China.

SU, D. and XIONG, Y., 2006. A grid based system for a manufacture/retailer virtual organization. In: Proceedings of the International Conference on Advanced Design and Manufacture, Harbin, China.

SU, D. and PENG, W., 2005. 3D simulation and infinite element analysis of an involute cylindrical worm and helical gear drive. In: Proceedings of the 19th International Conference on Computer Aided Production Engineering (CAPE2005), Melbourne.

SU, D., LI, J., XIONG, Y. and ZHENG, Y., 2005. Application of Internet techniques into online collaborative design and manufacture. In: Proceedings, 9th International Conference on Computer Supported Work in Design, Coventry, UK.

HOU, J. and SU, D., 2005. Manufacturer centralized product design specification environment - collaborative research supported by Asia Link Prgoramme. In: Proceedings of CEEE2005, Chongqing, China.

SU, D. and XIONG, Y., 2005. Resources packing to fit grid infrastructure. In: International e-Conference on Computer Sciences, 29-31 May 2005.

SU, D., 2005. Web/Internet supported collaborative design and maufacture. In: 9th International Conference on Computer Supported Collaborative Work in Design, Coventry, UK, 24-26 May 2005, Coventry.

SU, D. and JI, S., 2005. A heterogeneous collaborative design environment with dynamic management features. In: Proceedings, 9th International Conference on Computer Supported Work in Design, Coventry.

SU, D., ZHAN, D. and GENTLE, R., 2004. 3D modeling and tooth contact analysis of a globoid involute enveloping worm gear drive. In: Proceedings of the 11th World Congress in Mechanism and Machine Science (IFToMM2003), Tianjin, China.

JIANSHENG, L., SU, D., HENSHALL, J.L. and XIONG, Y., 2004. Development of a Web-enabled environment for collaborative design and manufacture. In: Proceedings of the 8th International Conference on Computer Supported Cooperative Work in Design, Xiamen, China.

SHUYAN, J., SU, D., HENSHALL, J.L. and HULL, J.B., 2004. Gear design optimisation using a genetic simulated annealing algorithm. In: International Conference on Adaptive Computing in Design and Manufacture, Bristol, 20-22 April 2004, Bristol.

HOU, J., SU, D. and HULL, J.B., 2004. Integration of Web-based techniques and business strategies into the development of a network supported system for supplier selection. In: 8th International Conference on Computer Supported Cooperative Work in Design, Xiamen, China, 26-28 May 2004, Xiamen, China.

ZHAN, D. and SU, D., 2004. Mathematical modeling and verification of a worm-gear drive with involute tooth profiles. In: 6th International Conference on Fronters of Design and Manufacturing, Xi'an, China, 21-23 June 2004, Xi'an, China.

LIU, G., PENG, W., SU, D., CHEN, B. and WANG, J., 2004. Mesh analysis and experimental investigation of an involute cylindrical worm - helical gear drive. In: 6th International Conference on Fronters of Design and Manufacturing, Xi'an, China, 21-23 June 2004, Xi'an, China.

XU, W., QIN, D., SU, D. and SHI, W., 2004. Tooth contact analysis for double envelop hourglass worm gearing with errors. In: 11th International Conference on Tools, Miskolc, Hungary, 9-11 September 2004, Miskolc, Hungary.

SU, D. and PENG, W., 2004. An involute cylindrical worm matting with an involute helical gear. In: 11th International Conference on Tools, Miskolc, Hungary, 9-11 September 2004, Miskolc, Hungary.

ZHAN, D., SU, D. and GENTLE, C.R., 2004. A novel 3D modelling approach utilizing virtual reality machning principles. In: Proceedings of the 11th World Congress in Mechanism and Machine Science (IFToMM2003), Tianjin, China.

PENG, W., XIONG, Y., JI, S. and SU, D., 2004. A virtual research institute and its utilzation in CAE for worm gear drives and gear design optimization. In: 8th International Conference on Computer Supported Cooperative Work in Design, Xiamen, China, 26-28 May 2004, Xiamen, China.

HULL, J.B., SU, D. and JI, S., 2003. Development of a powerful software tool for collaborative design and manufacture over the Internet. In: Proceedings of the International Conference on Industrial Tools, Bled, Slovenia.

SU, D., HULL, J.B. and HOU, J., 2003. Management of networked organizations using a Web-enabled collaborative environment. In: Proceedings of the 10th ISP International Conference on Concurrent Engineering: Research and Applications, Madeira, Portugal.

JI, S., SU, D. and HULL, J.B., 2002. Application of Java servlet technique for Internet-based design optimisation. In: Proceedings of 4th International Conference on Mechanics and Materials in Design, Nagoya, Japan.

SU, D., 2002. Integration of virtual manufacture, finite element analysis and experimental invesitgation into worm gear research. In: Proceedings of International Conference on Manufacturing Engineering, Oderhellen, Romania.

SU, D., CHEN, B., QIN, D., CHEN, X., PENG, Z. and WANG, J., 2002. Theoretical and experimental investigation into worm gear drives using elastic meshing theory, virtual manufacture and related advanced techniques. In: Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, Dalian, China.

SU, D., JI, S. and HULL, J.B., 2002. Web-enabled collaborative environment for integrated design and manufacture. In: Proceedings of Concurrent Engineering, Cranfield.

SU, D., JI, S., AMIN, N. and CHEN, X., 2002. A framework of Web support for collaborative design. In: Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, Dalian, China.

CHEN, X., YIN, Y. and SU, D., 2001. Collaborative computer aided design over the Internet/Intranet. In: Proceedings of the International Conference on e-Commerce Engineering: New Challenges of Global Manufacturing in the 21st Century, Xi'an, China.

SU, D., 2001. Design engineering: higher education and resource discovery over the Internet. In: 4th International Conference on Computer Aided Industrial Design and Conceptual Design, Jinan, China, 16-20 October 2001, Jinan, China.

SU, D. and LI, J., 2001. Development and advances of research in spline joints. In: International Conference on Mechanical Transmission, Chonqing, China, 5-9 April 2001, Chonqing, China.

AMIN, N. and SU, D., 2001. Development of an online gear catalogue using Java database connectivity. In: International Conference on Mechanical Transmission, Chonqing, China, 5-9 April 2001, Chonqing.

SONG, Y. and SU, D., 2001. Gear solid modeling and tooth contact analysis: state of the art. In: International Conference on Mechanical Transmission, Chonqing, China, 5-9 April 2001, Chonqing, China.

SU, D., AMIN, N. and HULL, J.B., 2001. An Internet-based system of gear design optimization using Java servlets. In: Proceedings of the International Conference on Computer Aided Industrial Design and Conceptual Design, Jina, China.

SU, D., AMIN, N., CHEN, X. and WANG, Y., 2001. Internet/Intranet based integrated design of mechanical transmission systems. In: 8th Drive and Control Conference, London, 13-15 March 2001, London.

SONG, Y., SU, D., LANAKIEV, A. and GENTLE, C.R., 2001. Loaded multi-tooth contact analysis of spiroid gears by surface-to-surface contact analysis using Finite Element method. In: International Conference on Mechanical Transmission, Chonqing, China, 5-9 April 2001, Chonqing, China.

CHEN, X., SU, D. and LI, Z., 2001. Network-supported collaborative design based on dynamic data exchange. In: Proceedings of the International Conference on Computer Aided Industrial Design and Conceptual Design, Jina, China.

SU, D., SONG, Y. and GENTLE, C.R., 2001. Optimum design and numerical simulation of helicon gears with localised tooth contact. In: International Conference on Mechanical Transmission, Chonqing, China, 5-9 April 2001, Chonqing, China.

SONG, Y., SU, D. and GENTLE, C.R., 2000. 3D virtual manufacturing of worm gear drives. In: Proceedings of the International Conference on Gearing, Transmission and Mechanical Systems, Nottingham.

SU, D., 2000. Advancement in mechanical design research. In: Proceedings, 4th International Conference on Frontiers of Design and Manufacturing, Hangzhou.

SU, D. and GOLISKI, D.I., 2000. A CAD package with multimedia features for belt drive design. In: Proceedings of the International Conference on Mechanics and Materials in Design, Orlando.

SU, D., YANG, F. and GENTLE, C.R., 2000. Finite element analysis for ZI worm gears with localised tooth contact. In: Proceedings of the ASME Design Engineering Technical Conferences, Baltimore.

SU, D. and QIN, S., 2000. Integration of numerical analysis, 3D simulation and finite element analysis for optimum design of worm gears. In: Proceedings of the International Manufacturing Conference in China, Hong Kong.

SU, D., 2000. Internet-based engineering research review and the utilisation of an integrated design and manufacturing system over the Internet. In: International Forum on Internet-based Design and Manufacturing, Hangzhou, China, 2000, Hangzhou, China.

YANG, F., SU, D. and GENTLE, C.R., 2000. Mesh stiffness and tooth stress calculation for worm gears using finite element method. In: Proceedings of the International Conference on Gearing, Transmission and Mechanical Systems, Nottingham.

SU, D., SONG, Y. and GENTLE, C.R., 2000. Numerical modelling of spiroid gears with localized tooth contact. In: Proceedings of the International Conference on Gearing, Transmission and Mechanical Systems, Nottingham.

SONG, Y., SU, D. and GENTLE, C.R., 2000. Optimum design of spiroid gears with the aid of 3D virtual manufacturing. In: Proceedings of the 4th International Conference on Adaptive Computing in Design and Manufacture, Plymouth.

AMIN, N. and SU, D., 2000. Utilisation of JAVA applets for gear design optimization. In: Proceedings of the International Conference on Gearing, Transmission and Mechanical Systems, Nottingham.

SU, D., SONG, Y. and GENTLE, C.R., 2000. A novel approach of obtaining localised tooth contact for spiroid gear drives. In: Proceedings of the ASME Design Engineering Technical Conferences, Baltimore.

SU, D., 1999. Advancement in design research and higher education. In: Proceedings, the 2nd International Conference on Computer Aided Industrial Design and Conceptual Design, Bangkok, Thailand.

SU, D. and YANG, F., 1999. Advancement in design, modelling and simulation of worm gearing with low sensitivity to errors. In: Proceedings of the 10th World Congress on the Theory of Machines and Mechanisms, Oulu, Finland.

YANG, F. and SU, D., 1999. Computer aided design and simulation for gear transmission. In: Proceedings of the 15th International Conference on Production Research, Limerick, Eire.

SU, D., YANG, F. and GENTLE, C.R., 1999. Computer aided design and simulation of worm gearing with localised tooth contact. In: British Gear Association Annual Congress, Telford, 18 March 1999, Telford.

SU, D. and YANG, F., 1999. Computer aided design of worm gearing with less sensitivity to manufacture and assembly errors. In: Proceedings of the 15th International Conference on Computer Aided Production Engineering, Durham.

SU, D., 1999. A building block method for computer aided conceptual design. In: Proceedings of the 15th International Conference on Computer Aided Production Engineering, Durham.

HENTHORN, K. and SU, D., 1999. A computer aided test and analysis system for measurement of cam mechanisms. In: Proceedings of the World Engineering Congress and Exhibition, Kuala Lumpur, Malaysia.

SU, D., WAKELAM, M., JAMBUNATHAN, K. and HENTHORN, K., 1999. An intelligent hybrid system for gear design. In: Proceedings of the 15th International Conference on Computer Aided Production Engineering, Durham.

SU, D., 1998. Application of artificial intelligence in gearing and mechanical transmission. In: Proceedings of the International Conference on the Theory and Practice of Gearing, Izhevsk, Russia.

SU, D., 1998. Application of expert system and artificial neural networks for design knowledge retrieval. In: Proceedings of the Engineering Design Conference '98, Brunel University.

SU, D., YANG, F., GENTLE, C.R. and REITH, D., 1998. Computer aided design of worm gearing with less sensitivity to manufacture and assembly errors. In: Proceedings of the 1998 ASME Design Engineering Technical Conferences, Atlanta, USA.

SU, D., 1998. Design automation with the aids of multiple artificial intelligent techniques. In: 5th ISPE International Conference on Concurrent Engineering, Tokyo, Japan, 15-17 July 1998, Tokyo, Japan.

WAKELAME, M., SU, D., HENTHORN, K. and JAMBUNATHAN, K., 1998. Development strategies for intelligent design integration. In: Proceedings of the International Conference on Mechanics in Design, Nottingham.

WAKELAME, M., SU, D., JAMBUNATHAN, K., HENTHORN, K. and WANG, X., 1998. Genetic optimisation of spur and helical gears. In: Proceedings of the International Conference on Mechanics in Design, Nottingham.

AMIN, N. and SU, D., 1998. Integrating hypermedia, CAD and data processing into electronic cataloguing for mechanical products. In: Proceedings of the 14th National Conference on Manufacturing Research, Derby.

YANG, F. and SU, D., 1998. Localised tooth contact for worm gearing: state of the art. In: Proceedings of the International Conference on the Theory and Practice of Gearing, Izhevsk, Russia.

JIANG, H., LI, S., PAN, P. and SU, D., 1998. Obstacle-surrounding mechanism design for a wall climbing robot. In: Proceedings of the International Conference on Mechanics in Design, Nottingham.

REN, M., AL-DABASS, D. and SU, D., 1998. Using associative memory neural network with sub-nets structure for classification of radicals in Chinese characters. In: Proceedings of the International Conference on Neural Network & Brain, Beijing.

SU, D., SU, Z. and HENTHORN, K., 1998. A computer aided test and analysis system for measurement of cam mechanisms. In: Proceedings of the International Conference on Mechanics in Design, Nottingham.

SU, Z. and SU, D., 1998. A computer software with AI features for measurement and experimental analysis of mechanical systems. In: Proceedings of the International Conference on Mechanics in Design, Nottingham.

SU, Z. and SU, D., 1998. An intelligent ES-ANNs system for objective evaluation of leather handle. In: Proceedings of the 1998 ASME Design Engineering Technical Conferences, Atlanta, USA.

YANG, F., WANG, X., SU, D. and GENTLE, C.R., 1998. A numerical method to obtain preferable localised tooth contact for cylindrical worm gearing. In: Proceedings of the International Conference on Mechanics in Design, Nottingham.

HENTHORN, K., WAKELAM, M., JAMBUNATHAN, K. and SU, D., 1997. Application of artificial intelligence in design and manufacture of power transmission systems. In: Proceedings of the 13th National Conference on Manufacturing Research, Glasgow.

SU, D., 1997. Computer aided concurrent design of cam mechanisms. In: Proceedings of the Drives and Controls Conference, Telford.

SU, D. and WAKELAM, M., 1997. Intelligent integrated system for the design of power transmission systems. In: Proceedings of the International Conference on Mechanical Transmissions and Mechanisms, Tianjin, China.

WANG, X., SU, D. and HULL, J.B., 1997. Optimum design of helical gears with modified tooth profiles. In: Proceedings of the 13th National Conference on Manufacturing Research, Glasgow.

REN, M., AL-DABASS, D. and SU, D., 1997. A fuzzy/possibilistic-reasoning AM-architecture for recognising radicals in Chinese characters. In: Proceedings ISFL'97: Second International ICSC (International Computer Science Conventions) Symposium on Fuzzy Logic and Applications, Zürich, Switzerland.

AIRAPETOV, E.L., SU, D. and MELNIKOVA, T.N., 1997. The influence of elemental errors and deformation on clearance between contact teeth of worm gearing. In: Proceedings of the International Conference on Mechanical Transmissions and Mechanisms, Tianjin, China.

SU, D., 1997. An integrated system for total design of disc cams with roller followers. In: Proceedings of the International Conference on Mechanical Transmissions and Mechanisms, Tianjin, China.

YANG, F. and SU, D., 1997. An operation planning method based on feature state analysis and a case study. In: Proceedings of the 13th International Conference on Computer Aided Production Engineering, Warsaw.

ZHOU, C.X., SU, D. and HULL, J.B., 1996. Analysis of design parameters of a ball-end mill with double inlaid carbide blades. In: Proceedings of the 9th International Conference on Tools, Miskolc, Hungary.

AIRAPETOV, E.L., SU, D. and HULL, J.B., 1996. Analysis of the length of contact lines of worm gearing. In: Proceedings of the International Conference on the Theory and Practice of Gearing, Izhevsk, Russia.

SU, D., 1996. Concurrent design of power transmission systems. In: Proceedings of the Drives and Controls Conference, Telford.

SU, D. and DUDÁS, I., 1996. Development of an intelligent integrated system approach for the design and manufacture of worm gears. In: Proceedings of the 9th International Conference on Tools, Miskolc, Hungary.

SU, D., 1996. Development of artificial neural networks for conceptual design of a power transmission system. In: Proceedings of the 2nd International Conference on Adaptive Computing in Engineering Design and Control, Plymouth.

JAMBUNATHAN, K., WAKELAM, M., HENTHORN, K. and SU, D., 1996. Integration of multimedia, artificial neural networks and rule based systems for gear design. In: Proceedings of the International Conference on the Theory and Practice of Gearing, Izhevsk, Russia.

WAKELAM, M. and SU, D., 1996. Knowledge representation incorporating artificial neural networks for mechanical power transmission system design. In: Proceedings of the IEE Colloquium on Knowledge Discovery and Data Mining, London.

SHEN, Q., ZHOU, C.X., SU, D. and LAU, W.L., 1996. Optimum design of worm gears with controllable point-contact conjugate tooth surfaces. In: Proceedings of the International Conference on the Theory and Practice of Gearing, Izhevsk, Russia.

SU, D., 1996. A computer aided general approach for loading-capacity analysis of cylindrical worm gears. In: Proceedings of the International Conference on the Theory and Practice of Gearing, Izhevsk, Russia.

SU, D., 1996. A prototype information system for gear strength analysis. In: Proceedings of the Drives and Controls Conference, Telford.

SU, D., 1995. Artificial intelligence in the automation of engineering design. In: Proceedings of the European Chinese Automation Conference, London.

SU, D. and HENTHORN, K., 1995. CAE for cam mechanism design/manufacture/testing and its utilzation for undergraduate CAE course. In: Proceedings of the 31st International MATADOR Conference, Manchester.

SU, D., 1995. Integrating hypermedia technique into gear strength analysis. In: Proceedings of the International Conference Hypermedia in Sheffield '95, Sheffield.

SU, D., 1995. Total design of disc cam-follower system: a CAD/CAE/CAM approach. In: Proceedings of the 10th International Conference on Engineering Design (ICED), Prague, Czech Republic.

AL-DABASS, D., REN, M. and SU, D., 1995. An associate memory artificial neural network system with a combined-radicals method for Chinese character recognition. In: Proceedings of the International Conference on Neural Network Processing, Beijing.

REN, M., SU, D. and AL-DABASS, D., 1995. An associative memory artificial neural network system. In: Proceedings of the European Chinese Automation Conference, London.

SU, D., 1994. Gearbox KBIS: a prototype knowledge-based integrated system for gearbox design. In: Proceedings of the International Gear Conference, Newcastle-upon-Tyne.

SU, D. and SWANNELL, M.J., 1993. Integrating CAD packages into the design and manufacture of a disc cam. In: Proceedings of the Managing Integrated Manufacturing Conference, Keele.

SU, D. and DRUCE, G., 1992. Kinematic optimisation of disc cam size by profile blending. In: Mechanism Committee, ESDU International Ltd., London, 20 May 1992, London.

SU, D. and DRUCE, G., 1991. The selection of needle-bearing rollers for disc cam mechanisms & the estimation of contact stress. In: Mechanism Committee, ESDU International Ltd., London, 11 May 1991, London.

SU, D. and FORGIE, R.J., 1989. Development of an expert system approach to an engineering design procedure. In: Proceedings of the Institution of Mechanical Engineers: Engineering Design (ICED89).

SU, D., 1988. Numerical analysis of worm gearing: inter-related parameters of contacting tooth surfaces. In: Proceedings of the International Conference on Gearing, Zheng Zhou, China.

SU, D. and FORGIE, R.J., 1987. Expert systems for mechanical engineering design: application and system building. In: Proceedings AI 87 JAPAN, Osaka, Japan.

SU, D. and FORGIE, R.J., 1987. Expert systems for mechanical engineering design: knowledge representation, analysis and design methodology. In: Proceedings AI East 87, Atlantic City, USA.

SU, D. and HONGYE, W.U., 1986. Numerical analysis method of the tooth surface load-carrying capacity of cylindrical worm gearing. In: Proceedings of the National Conference on the New Technique of Machine Design, Beijing.

SU, D. and HONGYE, W.U., 1986. Study of the meshing characteristics and tooth surface strength of ZK worm gearing. In: Proceedings of the 2nd World Congress on Gearing, Paris.

SU, D. and HONGYE, W.U., 1985. Analysis of contacting point parameters of worm gearing. In: Proceedings of the Symposium on Advancement in Mechanical Engineering, Harbin, China.

SU, D. and HONGYE, W.U., 1985. Numerical method to search the extreme value of a physical quantity of worm gearing. In: 1st National Conference on CAD/CAM, SA Sco, Harbin, China, 1985, Harbin, China.

SU, D. and HONGYE, W.U., 1985. A computer program to calculate contact stresses between a wormwheel and its worm generated by a disk cutter. In: National Conference on CAD and Microcomputer Technique, Chengdu, China, October, 1985, Chengdu, China.

HONGYE, W.U. and SU, D., 1983. An investigation of the load carrying capacity of ZK worm gearing. In: Proceedings of the National Conference on Gearing, Beijing.

Edited book

SU, D., ZHANG, Q. and ZHU, S., 2009. Advanced design and manufacture II. Pfaffikon, Switzerland: Trans Tech Publications. ISBN 9780878493104

Patent/Published patent application

SHAO, Y. and SU, D., 2015. An embedded sensory system for low-speed gearboxes. ZL 2012 1 0528026.4.

Other

SU, D., CASAMAYOR, J. and COSTA, J., 2013. Spotlight.

This list was generated on Sun Dec 15 05:02:36 2019 UTC.