Items where Author is "Al-Habaibeh, A"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 139.

Journal article

SHIN, H.D., AL-HABAIBEH, A. and CASAMAYOR, J.L., 2017. Using human-powered products for sustainability and health: benefits, challenges, and opportunities. Journal of Cleaner Production, 168, pp. 575-583. ISSN 0959-6526

AL-MARRI, W., AL-HABAIBEH, A. and ABDO, H., 2017. Exploring the relationship between energy cost and people's consumption behaviour. Energy Procedia, 105, pp. 3464-3470. ISSN 1876-6102

ATHRESH, A.P., AL-HABAIBEH, A. and PARKER, K., 2017. An innovative and integrated approach for using energy from the flooded coal mines for pre-warming of a gas engine in standby mode using GSHP. Energy Procedia, 105, pp. 2531-2538. ISSN 1876-6102

HAWAS, A., AL-HABAIBEH, A. and MEDJDOUB, B., 2017. Innovative design of an educational physical simulation tool for investigating energy consumption in buildings for enhancing public engagement. Energy Procedia, 105, pp. 2615-2622. ISSN 1876-6102

BANKS, D., ATHRESH, A., AL-HABAIBEH, A. and BURNSIDE, N., 2017. Water from abandoned mines as a heat source: practical experiences of open- and closed-loop strategies, United Kingdom. Sustainable Water Resources Management. ISSN 2363-5037

ALKHADAFE, H., AL-HABAIBEH, A. and LOTFI, A., 2016. Condition monitoring of helical gears using automated selection of features and sensors. Measurement, 93, pp. 164-177. ISSN 0263-2241

SHAO, Y., SU, D., AL-HABAIBEH, A. and YU, W., 2016. A new fault diagnosis algorithm for helical gears rotating at low speed using an optical encoder. Measurement, 93, pp. 449-459. ISSN 0263-2241

ATHRESH, A.P., AL-HABAIBEH, A. and PARKER, K., 2016. The design and evaluation of an open loop ground source heat pump operating in an ochre-rich coal mine water environment. International Journal of Coal Geology, 164, pp. 69-76. ISSN 0166-5162

ASRAR, M., AL-HABAIBEH, A. and HOUDA, M., 2016. Innovative algorithm to evaluate the capabilities of visual, near infrared, and infrared technologies for the detection of veins for intravenous cannulation. Applied Optics, 55 (34), D67-D75. ISSN 0003-6935

MOHAMED, A.M.A., AL-HABAIBEH, A., ABDO, H. and ELABAR, S., 2015. Towards exporting renewable energy from MENA region to Europe: an investigation into domestic energy use and householders’ energy behaviour in Libya. Applied Energy, 146, pp. 247-262. ISSN 0306-2619

ELGARGNI, M., AL-HABAIBEH, A. and LOTFI, A., 2015. Cutting tool tracking and recognition based on infrared and visual imaging systems using principal component analysis (PCA) and discrete wavelet transform (DWT) combined with neural networks. The International Journal of Advanced Manufacturing Technology, 77 (9), pp. 1965-1978. ISSN 0268-3768

AL-HABAIBEH, A., MEYEROWITZ, B., DUOLAN, and ATHRESH, A., 2015. The Design and Development of an Innovative Simulator for an Open Loop System for Extracting Energy from Flooded Coal Mines. Energy Procedia, 75, pp. 1470-1476. ISSN 1876-6102

ATHRESH, A.P., AL-HABAIBEH, A. and PARKER, K., 2015. Innovative Approach for Heating of Buildings Using Water from a Flooded Coal Mine Through an Open Loop Based Single Shaft GSHP System. Energy Procedia, 75, pp. 1221-1228. ISSN 1876-6102

YASEEN, S., AL-HABAIBEH, A., SU, D. and OTHAM, F., 2013. Real-time crowd density mapping using a novel sensory fusion model of infrared and visual systems. Safety Science, 57, pp. 313-325. ISSN 0925-7535

AL-HABAIBEH, A., MOHAMED, A.M.A. and ABDO, H., 2013. An investigation into the current utilisation and prospective of renewable energy resources and technologies in Libya. Renewable Energy, 50, pp. 732-740. ISSN 0960-1481

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2013. Investigating the design of condition monitoring systems to evaluate surface roughness under the variability in tool wear and fixturing conditions. Key Engineering Materials, 572, pp. 467-470. ISSN 1662-9795

MOHAMED, A.M.A., AL-HABAIBEH, A., ABDO, H. and ABDUNNABI, M.J.R., 2013. The significance of utilizing renewable energy options into the Libyan energy mix. Energy Research Journal, 4 (1), pp. 15-23. ISSN 1949-0151

ALKHADAFE, H., AL-HABAIBEH, A., LOTFI, A. and SU, D., 2012. Optimising sensor location for an enhanced gearbox condition monitoring system. Journal of Physics: Conference Series, 364. ISSN 1742-6596

REDGATE, J., AL-HABAIBEH, A., SU, D., WILMHURST, T. and RUDD, J., 2011. Evaluation of component reliability using data derived from infrared thermography. Key Engineering Materials, 450, pp. 275-278.

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2011. Sensor fusion for condition monitoring system of end milling operations. Key Engineering Materials, 450, pp. 267-270.

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2011. The effect of tool fixturing quality on the design of condition monitoring systems for detecting tool conditions. JJMIE - Jordan Journal of Mechanical and Industrial Engineering, 5 (1), pp. 17-22. ISSN 1995-6665

GRAISA, M. and AL-HABAIBEH, A., 2011. An investigation into current production challenges facing the Libyan cement industry and the need for innovative Total Productive Maintenance (TPM) strategy. Journal of Manufacturing Technology Management, 22 (4), pp. 541-558. ISSN 1741-038X

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2011. The investigation of prediction surface roughness from machining forces in end milling processes. Key Engineering Materials, 486, pp. 91-94.

ASHRAF, S., MUHAMMAD, E., AL-HABAIBEH, A. and RASHID, F., 2010. Self learning fuzzy controllers using iterative learning tuner. Digital Signal Processing, 20 (1), pp. 289-300. ISSN 1051-2004

AL-HABAIBEH, A., AL-AZMI, A., RADWAN, N. and YANG, S., 2010. The application of force and acoustic emission sensors for detecting tool damage in turning processes. Key Engineering Materials, 419420, pp. 381-384.

AL-HABAIBEH, A., YASEEN, S., PARKIN, R.M., OTHAM, F. and ALBAR, O., 2010. The design of a novel sensor fusion model for monitoring people's density in public places using infrared thermography. Key Engineering Materials, 419420, pp. 377-380.

AL-HABAIBEH, A., SU, D., MCCAGUE, J. and KNIGHT, A., 2010. An innovative approach for energy generation from waves. Energy Conversion and Management, 51 (8), pp. 1664-1668. ISSN 0196-8904

AL-AZMI, A., AL-HABAIBEH, A. and REDGATE, J., 2009. Rapid design of tool-wear condition monitoring systems for turning processes using novelty detection. International Journal of Manufacturing Technology and Management, 17 (3), pp. 232-245.

ASHRAF, S., MUHAMMAD, E. and AL-HABAIBEH, A., 2008. Self-learning control systems using identification based adaptive iterative learning controller. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 222 (7), pp. 1177-1187. ISSN 0954-4062

AL-AZMI, A. and AL-HABAIBEH, A., 2008. The design of enhanced on-line condition monitoring systems for turning processes. International Journal of Design Engineering, 2 (1).

AMIN, I., TAYLOR, A., JUNEJO, F., AL-HABAIBEH, A. and PARKIN, R.M., 2006. Automated people counting by using low-resolution infrared and visual cameras. Measurement, 41 (6), pp. 589-599. ISSN 0263-2241

AYOUBI, R. and AL-HABAIBEH, A., 2006. An investigation into international business collaboration in higher education organisations: a case study of international partnerships in four UK leading universities. International Journal of Educational Management, 20 (5), pp. 380-396. ISSN 0951-354X

AL-HABAIBEH, A., ZORRIASSATINE, F., PARKIN, R.M. and JACKSON, M.R., 2005. Application of infrared technology for quality control of diesel engine glow plugs. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 219 (6), pp. 483-489. ISSN 0954-4054

AL-HABAIBEH, A., PARKIN, R., ZORRIASSATINE, F., JACKSON, M.R. and COY, J., 2005. Novelty detection for practical pattern recognition in condition monitoring of multivariate processes: a case study. International Journal of Advanced Manufacturing Technology, 25, pp. 954-963. ISSN 0268-3768

AL-HABAIBEH, A., SHI, F., BROWN, N., KERR, D., JACKSON, M. and PARKIN, R.M., 2004. A novel approach for quality control system using sensor fusion of infrared and visual image processing for laser sealing of food containers. Measurement Science and Technology, 15 (10), pp. 1995-2000. ISSN 0957-0233; 1361-6501

AL-HABAIBEH, A., SHI, F., BROWN, N., KERR, D., JACKSON, M. and PARKIN, R.M., 2004. A novel approach for quality control system using sensor fusion of infrared and visual image processing for laser sealing of food containers. Measurement Science and Technology, 15 (10), pp. 1995-2000. ISSN 0957-0233; 1361-6501

AL-HABAIBEH, A., GINDY, N. and PARKIN, R.M., 2003. Experimental design and investigation of a pin-type reconfigurable clamping system for manufacturing aerospace components. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 217 (12), pp. 1771-1777. ISSN 0954-4054

AL-HABAIBEH, A. and PARKIN, R., 2003. Low-cost mechatronic systems for teaching condition monitoring. International Journal of Engineering Education, 19 (4), pp. 615-622. ISSN 0949-149X

AL-HABAIBEH, A. and PARKIN, R.M., 2003. An automated low-cost condition monitoring system for quality control of automotive speedometers. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 217 (12), pp. 1763-1770. ISSN 0954-4054

AL-HABAIBEH, A. and PARKIN, R., 2003. An autonomous low-cost infrared system for the on-line monitoring of manufacturing processes using novelty detection. International Journal of Advanced Manufacturing Technology, 22, pp. 249-258. ISSN 0268-3768

AL-HABAIBEH, A., ZORRIASSATINE, F. and GINDY, N., 2002. Comprehensive experimental evaluation of a systematic approach for cost effective and rapid design of condition monitoring systems using Taguchi's Method. Journal of Materials Processing Technology, 124 (3), pp. 372-383. ISSN 0924-0136

AL-HABAIBEH, A., ZORRIASSATINE, F. and GINDY, N., 2002. Comprehensive experimental evaluation of a systematic approach for cost effective and rapid design of condition monitoring systems using Taguchi's Method. Journal of Materials Processing Technology, 124 (3), pp. 372-383. ISSN 0924-0136

PARKIN, R.M., JUNA, A.F., AL-HABAIBEH, A., JACKSON, M.R. and MANSI, M., 2002. Low cost infrared sensors for intelligent deployment of automotive restraint systems. 47 Internationales Wissenschaftliches Kolloquium, Technische Universitat Ilmenau, Germany, 23 September 2002, pp. 129-130. ISSN 0943-7207

AL-HABAIBEH, A. and GINDY, N., 2001. Self-learning algorithm for automated design of condition monitoring systems for milling operations. The international Journal of Advanced Manufacturing Technology, 18 (6), pp. 448-459. ISSN 0268-3768

AL-HABAIBEH, A. and GINDY, N., 2000. A new approach for systematic design of condition monitoring systems for milling processes. Journal of Materials Processing Technology, 107, pp. 243-251. ISSN 0924-0136

Authored book

AL-HABAIBEH, A., PARKIN, R.M. and JACKSON, M.R., 2003. International Conference on Mechatronics ICOM03. Bury St Edmunds: Professional Engineering Publishing. ISBN 1860584209

Chapter in book

VAHEESAN, K., CHANDRAKUMAR, C., MATHAVAN, S., KAMAL, K., RAHMAN, M. and AL-HABAIBEH, A., 2015. Tiled fuzzy Hough transform for crack detection. In: F. MERIAUDEAU and O. AUBRETON, eds., Proceedings of SPIE: Twelfth International Conference on Quality Control by Artificial Vision 2015, Le Creusot, France, 3 June 2015. SPIE, p. 953411. ISBN 9781628416992

ELGARGNI, M.A. and AL-HABAIBEH, A., 2013. A comparative study of signal and image processing systems for condition monitoring of milling processes using artificial intelligence. In: Proceedings of the 2013 IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies (AEECT). UNSPECIFIED. ISBN 9781479923052

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2010. Using multi-sensor system for condition monitoring system of machining operations. In: S. BANDYOPADHYAY, ed., College Conference: Re-defining Research, 8 July 2010: conference proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 46-53. ISBN 9780957600904

ELGARGNI, M., AL-HABAIBEH, A., LOTFI, A. and SU, D., 2010. The application of infrared and visual image processing in condition monitoring systems of manufacturing processes. In: S. BANDYOPADHYAY, ed., College Conference: Re-defining Research, 8 July 2010: conference proceedings. Nottingham: Nottingham Trent University: CADBE, pp. 54-58. ISBN 9780957600904

REDGATE, J., AL-HABAIBEH, A., JAYAWEERA, D., TARRENT, D. and PICKERING, P., 2009. Modelling the reliability of electrical power systems from data derived by infrared thermography. In: Proceedings of IRF'2009, 3rd International Conference on Integrity, Reliability and Failure. UNSPECIFIED. ISBN 9789728826215

AL-AZMI, A., AL-HABAIBEH, A. and SU, D., 2006. Modern developments in condition monitoring systems of machining processes - a literature survey. In: Proceedings of the International Conference on Advanced Design and Manufacture. UNSPECIFIED. ISBN 1842331183

ELLWOOD, A., AL-HABAIBEH, A. and DONLEY, S., 2006. Quality and productivity improvements in food processing using automated control. In: Proceedings of the International Conference on Advanced Design and Manufacture. UNSPECIFIED. ISBN 1842331183

AL-HABAIBEH, A., AL-AZMI, A. and REDGATE, J., 2006. Rapid design of tool-wear condition monitoring systems for turning processes. In: Proceedings of the International Conference on Advanced Design and Manufacture. UNSPECIFIED. ISBN 1842331183

REDGATE, J., AL-HABAIBEH, A. and SU, D., 2006. Simulink model of electric vehicle for maximum efficiency operation. In: Proceedings of the International Conference on Advanced Design and Manufacture. UNSPECIFIED, pp. 791-795. ISBN 1842331183

REDGATE, J. and AL-HABAIBEH, A., 2005. Application of improved efficiency VVVF induction motor drives for electric vehicle control. In: International Conference on Automation, Control and Instrumentation, International Association for the Development of Advances in Technology, Bilbao, Spain, 2-4 February 2005. UNSPECIFIED, pp. 46-50. ISBN 8493397121

AL-HABAIBEH, A., PARKIN, R.M., OTHMAN, F.M. and ALBAR, O., 2005. Intelligent buildings using integrated and autonomous condition monitoring systems. In: Proceedings of the international conference on condition monitoring systems 2005. UNSPECIFIED. ISBN 0190189182

REDGATE, J., AL-HABAIBEH, A. and PARKIN, R.M., 2005. The design of enhanced condition monitoring systems using a novel sensor positioning and signal conditioning approach. In: Proceedings of the ASME Design Engineering Technical Conferences. ASME, pp. 661-668. ISBN 0791847381

WALLER, T.M., CAINE, M.P. and AL-HABAIBEH, A., 2005. The development of a novel multi-channel vented garment technology. In: A. SUBSIC and S. UJHASHI, eds., Proceedings of the Asia-Pacific congress on sports technology. UNSPECIFIED, pp. 68-73. ISBN 0646450255

AL-HABAIBEH, A. and PARKIN, R.M., 2005. An evaluation of a heat transfer process using sensor fusion of thermocouples and infrared thermography. In: Proceedings of the international conference on condition monitoring systems 2005. UNSPECIFIED, pp. 229-233. ISBN 0190189182

ASHRAF, B., PARKIN, R.M., HYNEK, P. and AL-HABAIBEH, A., 2004. Internet based control of a heat patch monitoring system. In: Proceedings of Mechatronics and Robotics 2004. UNSPECIFIED, pp. 406-410. ISBN 393815350X

MISTRY, K., SIROT, J., AL-HABAIBEH, A. and LOTFI, A., 2004. An intelligent embedded robotic system supported by Bluetooth connectivity for flexible operation. In: Proceedings of the 5th international conference on recent advances in soft computing. UNSPECIFIED, pp. 590-598. ISBN 1842331108

HIGGS, P.A., PARKIN, R.M., JACKSON, M.R., AL-HABAIBEH, A., ZORRIASSATINE, F. and COY, J., 2004. A survey on condition monitoring systems in industry. In: Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis. New York, NY: American Society of Mechanical Engineers, pp. 163-178. ISBN 0791841731

AL-HABAIBEH, A., PARKIN, R.M., JACKSON, M.R., WHITBY, D.R., MANSI, M. and COY, J., 2003. Condition based maintenance of machinery using autonomous infrared system. In: 16th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, COMADEM 2003, Vaxjo, Sweden, 27 August 2003. UNSPECIFIED, pp. 535-544. ISBN 9176363767

NOTINI, L., AL-HABAIBEH, A., ZORRIASSATINE, F., PARKIN, R.M., JACKSON, M.R. and COY, J., 2003. Condition monitoring of belt based power transmission systems using low resolution thermal imaging. In: R.M. PARKIN, A. AL-HABAIBEH and M.R. JACKSON, eds., Proceedings of ICOM03, international conference on mechatronics. Bury St Edmunds: UNSPECIFIED. ISBN 1860584209

AL-HABAIBEH, A., PARKIN, R.M., OTHMAN, F. and ALBAR, O., 2003. Investigation of an automated system for estimating people's density using infra-red thermal imaging. In: R.M. PARKIN, A. AL-HABAIBEH and M.R. JACKSON, eds., Proceedings of ICOM03, international conference on mechatronics. Bury St Edmunds: Professional Engineering Publishing,, pp. 371-376. ISBN 1860584209

AL-HABAIBEH, A., WHITBY, D.R., PARKIN, R.M., JACKSON, M.R., MANSI, M. and COY, J., 2003. Smart restraint systems utlizing low cost infrared sensing. In: R.M. PARKIN, A. AL-HABAIBEH and M.R. JACKSON, eds., Proceedings of ICOM03, international conference on mechatronics. Bury St Edmunds: UNSPECIFIED, pp. 255-260. ISBN 1860584209

AL-HABAIBEH, A., WHITBY, D.R., PARKIN, R.M., JACKSON, M.R., MANSI, M. and COY, J., 2003. The development of an Internet-based mechatronic system for remote diagnostic of machinery using embedded sensors. In: R.M. PARKIN, A. AL-HABAIBEH and M.R. JACKSON, eds., Proceedings of ICOM03, international conference on mechatronics. Bury St Edmunds: Professional Engineering Publishing, pp. 297-302. ISBN 1860584209

ZORRIASSATINE, F., AL-HABAIBEH, A., NOTINI, L., SALVAN, R.M., PARKIN, R.M., JACKSON, M.R. and COY, J., 2003. An integrated sensory system for intelligent condition monitoring of mail processing machines. In: 16th International Congress and Exhibition on Condition Monitoring amd Diagnostic Engineering Management, COMADEM 2003, Vaxjo, Sweden, 27 August 2003. UNSPECIFIED. ISBN 9176363767

AL-HABAIBEH, A. and PARKIN, R., 2002. Autonomous low-cost infrared system for condition monitoring of electronic components. In: Proceedings of the 15th international congress and exhibition on condition monitoring and diagnostic engineering management. UNSPECIFIED, pp. 309-318. ISBN 0954130707

PARKIN, R.M., AL-HABAIBEH, A., COY, J., MANSI, M. and JACKSON, M.R., 2002. Intelligent systems for machine condition monitoring. In: P. MAISSER and P. TENBERGE, eds., Mechatronics (International symposium) (Ist:2002 Mar: Chemnitz, Germany). Institute fur Mechatronik, pp. 41-45. ISBN 3000075046

PARKIN, R.M., JACKSON, M.R., JUNA, A.F., WHITBY, D.R., AL-HABAIBEH, A. and MANSI, M., 2002. Low cost infrared sensors for intelligent deployment of automotive restraint systems. In: Proceedings of the 5th international conference on vehicle electronic systems. UNSPECIFIED, pp. 41-49. ISBN 9700807578

AL-HABAIBEH, A., LIU, G.P. and GINDY, N., 2002. Sensor fusion for an integrated process and machine condition monitoring system. In: Proceedings of the 15th world congress - International Federation of Automatic Control. UNSPECIFIED, pp. 25-30. ISBN 0080442358

AL-HABAIBEH, A., PARKIN, R.M., JACKSON, M.R., WHITBY, D.R., MANSI, M. and COY, J., 2002. The application of an autonomous low-cost infrared thermal imager for condition based maintenance of machinery. In: Proceedings of Mechatronics 2002. UNSPECIFIED, pp. 868-877. ISBN 9036517664

Conference contribution

KROMANIS, R. and AL-HABAIBEH, A., 2017. Low cost vision-based systems using smartphones for measuring deformations in structures for condition assessment. In: The 8th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-8), Brisbane, Australia, 5-8 December 2017. (Forthcoming)

HAWAS, A. and AL-HABAIBEH, A., 2017. Innovative concept of an educational physical simulation tool for teaching energy consumption in buildings for enhancing public engagement. In: The 9th International Conference on Applied Energy (ICAE2017), Cardiff University, Cardiff, 21-24 August 2017.

AL-HABAIBEH, A., SHAKMAK, B. and FANSHAWE, S., 2017. The development of an experimental test rig to evaluate the performance of a new technology for stratified hot water storage - the water snake. In: The 9th International Conference on Applied Energy (ICAE2017), Cardiff University, Cardiff, 21-24 August 2017.

AL-MARRI, W., AL-HABAIBEH, A. and ABDO, H., 2016. Exploring the relationship between energy cost and people's consumption behaviour. In: The 8th International Conference on Applied Energy – ICAE2016, Beijing, China, 8-11 October 2016.

HAWAS, A., AL-HABAIBEH, A. and MEDJDOUB, B., 2016. Innovative design of an educational simulation tool for exploring energy consumption in buildings towards enhancing public engagement. In: 8th International Conference on Applied Energy (ICAE2016), Beijing, China, 8-11 October 2016.

ATHRESH, A., AL-HABAIBEH, A. and PARKER, K., 2016. An innovative and integrated approach for using energy from the flooded coal mines for pre-warming of a gas engine in standby mode using GSHP. In: 8th International Conference on Applied Energy (ICAE2016), Beijing, China, 8-11 October 2016.

MOHAMED, A.M.A., AL-HABAIBEH, A. and ABDO, H., 2016. Future prospects of the renewable energy sector in libya. In: SBE16 Dubai Conference, Dubai, United Arab Emirates, 17-19 January 2016.

ELGARGNI, M.A. and AL-HABAIBEH, A., 2015. Analytical and comparative study of using a CNC machine spindle motor power and infrared technology for the design of a cutting tool condition monitoring system. In: 2015 IEEE 13th International Conference on Industrial Informatics (INDIN), Cambridge, 22-24 July 2015.

SHAKMAK, B. and AL-HABAIBEH, A., 2015. Detection of water leakage in buried pipes using infrared technology; a comparative study of using high and low resolution infrared cameras for evaluating distant remote detection. In: 2015 IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies (AEECT), Amman, Jordan, 3 November 2015.

ASRAR, M., AL-HABAIBEH, A. and HOUDA, M.R., 2015. A comparative study between visual, near infrared and infrared images for the detection of veins for intravenous cannulation. In: AITA 2015 - Advanced Infrared Technology and Applications, Pisa, Italy, 29 September - 2 October 2015.

ABBASS, J.K. and AL-HABAIBEH, A., 2015. A comparative study of using spindle motor power and eddy current for the detection of tool conditions in milling processes. In: 2015 IEEE 13th International Conference on Industrial Informatics (INDIN), Cambridge, 22-24 July 2015.

FANSHAWE, S., AL-HABAIBEH, A. and SHAKMAK, B., 2015. An innovative design and evaluation of a stratified hot water storage system - the Water Snake. In: 2015 IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies (AEECT), Amman, Jordan, 3 November 2015.

ELGARGNI, M., AL-HABAIBEH, A. and LOTFI, A., 2013. Condition monitoring of cutting tools using image processing. In: Proceedings of Comadem2013 Congress, Helsinki.

LOTFI, A., JALIL, L.I. and AL-HABAIBEH, A., 2013. Investigating occupant behaviour to improve energy efficiency in social housing. In: Proceedings of 9th International Conference on Intelligent Environments (IE'13), Athens.

MOHAMED, A.M.A., AL-HABAIBEH, A., ABDO, H. and ELHAFAR, A., 2013. An investigation into the usefulness of the utilisation of renewable energy in Libya. In: 1st International Conference on Electrical and Computer Engineering (ICECE), Benghazi, Libya, 26-28 March 2013.

AL-HABAIBEH, A., MEDJDOUB, B. and PIDDUCK, A., 2012. Investigating the influence of door design on the energy consumption of buildings using infrared thermography. In: 4th Jordanian IIR International Conference on Refrigeration and Air Conditioning, Amman, Jordan, 10-12 September 2012.

AL-HABAIBEH, A. and SIENA, F.L., 2012. The application of infrared thermography for the evaluation of insulation and energy performance of buildings. In: 4th Jordanian IIR International Conference on Refrigeration and Air Conditioning, Amman, Jordan, 10-12 September 2012.

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2011. Sensor fusion for condition monitoring system of end milling operations. In: Proceedings of the 3rd International Conference on Advanced Design and Manufacture (ADM2010), Nottingham.

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2011. The investigation of prediction surface roughness from machining forces in end milling processes. In: Proceedings of the 4th International Conference on Advanced Design and Manufacture (ADM2011), Kunming.

AL-HABAIBEH, A., ANDERSON, G., DAMJI, K., JONES, G. and LAM, K., 2010. Using infrared thermography for monitoring thermal efficiency of buildings - case studies from Nottingham Trent University. In: Seventh Jordanian International Mechanical Engineering Conference (JIMEC’7), Amman, Jordan, 27-29 September 2010.

ABBAS, J., AL-HABAIBEH, A. and SU, D., 2010. The effect of tool fixturing quality on the design of condition monitoring systems for detecting tool conditions. In: Seventh Jordanian International Mechanical Engineering Conference (JIMEC’7), Amman, Jordan, 27-29 September 2010.

ALKHADAFE, H., LOTFI, A., AL-HABAIBEH, A. and DAIZHONG, S., 2010. An investigation into loose bearing prediction and diagnosis on gearbox system performance measurement. In: 24th International Congress on Condition Monitoring and Engineering Management (COMADEM 2011), Stavanger, Norway, 30 May - 1 June 2011.

AL-HABAIBEH, A., SU, D. and ARMAN, H., 2009. An innovative approach for research-informed product design teaching using wave energy generation case study. In: Proceedings of The International Ocean Energy Symposium 2009, Harbin, China.

AL-HABAIBEH, A., RADWAN, N., REDGATE, J. and LAD, M., 2008. Experimental case studies on the effect of insulation on energy conservation in buildings. In: Proceedings of the Fourth International Conference on Energy Research and Development, Kuwait.

AL-AZMI, A. and AL-HABAIBEH, A., 2008. The application of vibration analysis in the design of condition monitoring systems. In: Proceedings of the Fourth International Conference on Energy Research and Development, Kuwait.

AL-HABAIBEH, A., SU, D., MCCAGUE, J. and KNIGHT, A., 2008. An innovative approach for energy generation from waves. In: Proceedings of the Global Conference on Renewables and Energy Efficiency for Desert Regions, Jordan.

AL-HABAIBEH, A., OTHMAN, F., REDGATE, J. and RADWAN, N., 2007. Energy conservation in buildings: thermal behaviour of buildings in hot and cold climates. In: ASME Middle East Mechanical Expo Conference, Manama, Bahrain, 4-7 November 2007, Manama, Bahrain.

REAST, T.R.J. and AL-HABAIBEH, A., 2007. The IET: evolutionary change for excellence case studies from the East Midlands region. In: Proceedings of the 4th International Conference on Responsive Manufacturing.

AL-AZMI, A. and AL-HABAIBEH, A., 2007. Responsive design of condition monitoring systems to detect tool wear in turning processes using novelty detection. In: Proceedings of the 4th International Conference on Responsive Manufacturing.

GRAISA, M. and AL-HABAIBEH, A., 2007. Total productive maintenance (TPM): case studies from human factor and technology perspectives. In: ASME Middle East Mechanical Expo Conference, Manama, Bahrain, 4-7 November 2007, Manama, Bahrain.

AL-HABAIBEH, A., REDGATE, J. and DARKWA, K., 2006. Investigation into thermal performance of buildings in the UK using infrared thermography - a case study. In: 4th International Energy Conversion Engineering Conference, California, 26-29 June 2006, California.

AL-HABAIBEH, A. and REDGATE, J., 2006. Measuring comparative heat losses in modern and old buildings using infrared thermography. In: International Conference on Automation, Control and Instrumentation, International Association for the Development of Advances in Technology, Valencia, Spain, 15-17 July 2006, Valencia, Spain.

OCHANA, A.R., HUTT, D.A., WHALLEY, D.C., SARVAR, F. and AL-HABAIBEH, A., 2006. Modeling of the Power Cycling Performance of a Si on Si Flip Chip Assembly. In: 10th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronics Systems (ITHERM '06), San Diego, California, 30 May - 2 June, 2006.

AL-HABAIBEH, A. and AL-AZMI, A., 2006. On-line condition monitoring system for turning processes using artificial neural networks. In: Proceedings of the international conference on multidisciplinary information sciences and technologies, InSciT2006.

REDGATE, J., AL-HABAIBEH, A. and DARKWA, K., 2006. Optimum efficiency induction motor drives for the electric vehicle application. In: 4th International Energy Conversion Engineering Conference, California, 26-29 June 2006, California.

WILLIAMS, A.A., AL-HABAIBEH, A. and REDGATE, J., 2006. Performance evaluation and imorovement of small biomass plant using infrared thermography. In: 4th International Energy Conversion Engineering Conference, California, USA, 26-29 June, 2006, California.

REDGATE, J. and AL-HABAIBEH, A., 2006. Practical evaluation of an optimum efficiency VVVF induction motor drive for electric vehicles. In: International Conference on Automation, Control and Instrumentation, International Association for the Development of Advances in Technology, Valencia, Spain, 15-17 July 2006, Valencia, Spain.

AL-HABAIBEH, A. and AL-AZMI, A., 2006. Sensor fusion model for condition monitoring system of turning rpocess using artificial intelligence. In: Proceedings of the international conference on multidisciplinary information sciences and technologies, InSciT2006.

REDGATE, J., AL-HABAIBEH, A., WILLIAMS, A. and KANSARA, M., 2006. Sustainable transport system using renewable energy and efficient electric vehicles. In: Proceedings of the 12th International Conference on Urban Transport and the Environment in the 21st Century, Prague, Czech Republic.

AL-HABAIBEH, A., ALLINSON, D., REDGATE, J.S. and MEDJDOUB, B., 2006. The application of infrared thermography for energy conservation in buildings. In: Proceedings of The Joint International Conference on Construction Culture, Innovation and Management, Dubai.

RADWAN, N., DEAN, A. and AL-HABAIBEH, A., 2006. A correlation between knowledge management in small-to-medium enterprises within the construction industry and workforce diversity management. In: Proceedings of The Joint International Conference on Construction Culture, Innovation and Management, Dubai.

PARKIN, R.M., ASHRAF, B., HYNEK, P. and AL-HABAIBEH, A., 2004. Control of a heat patch monitoring system via internet. In: Proceedings ICMT 2004, Hanoi, Vietnam.

AL-HABAIBEH, A., CAI, R., JACKSON, M.R. and PARKIN, R.M., 2004. Modern development in sensor technology and its applications in condition monitoring. In: Proceedings of the 7th international conference on monitoring and automatic supervision in manufacturing, Zakopane, Poland.

AL-HABAIBEH, A., PARKIN, R.M. and OTHMAN, F.M., 2004. Multi-disciplinary approach towards organising large-scale events. In: Proceedings of the 2nd IIEC-2004, Riyadh, Saudi Arabia.

AL-HABAIBEH, A. and PARKIN, R.M., 2004. A generic approach towards intelligent condition monitoring systems of machining operations. In: Proceedings of the 7th international conference on monitoring and automatic supervision in manufacturing, Zakopane, Poland.

AL-HABAIBEH, A., PARKIN, R.M. and OTHMAN, F.M., 2004. A modern mechatronic approach for teaching condition monitoring of manufacturing processes. In: Proceedings of the 2nd IIEC-2004, Riyadh, Saudi Arabia.

PARKIN, R.M. and AL-HABAIBEH, A., 2003. Control of a heat patch monitoring system. In: Proceedings of the IEEE International Conference on Industrial Technology, Maribor, Slovenia.

COY, J., AL-HABAIBEH, A., PARKIN, R.M., JACKSON, M.R., WHITBY, D.R. and SENIOR, M., 2003. Low cost thermal imaging system for condition-based maintenance of mail sorting machines. In: Proceedings of the 15th international conference on postal automation, Windsor, UK.

PARKIN, R.M., JUNA, A.F., AL-HABAIBEH, A., JACKSON, M.R. and MANSI, M., 2002. Automotive information systems: the role of low cost infrared sensing. In: Proceedings of the 6th international conference on mechatronics technology, Kitakyushu, Japan.

AL-HABAIBEH, A., PARKIN, R.M. and JACKSON, M.R., 2001. Applications of low-cost infrared thermal imager for condition based maintenance of machinery [poster presentation]. In: SET for Britain, House of Commons, London, 3 December 2001, London.

Newspaper or popular journal contribution

AL-HABAIBEH, A. and SHIN, H.D., 2017. Cycling to watch TV ... and other clever ways to beat obesity from the comfort of your own home. The Conversation.

AL-HABAIBEH, A., 2017. Apple's goodbye to the MP3 player reminds us why the iPod became an instant classic. The Conversation.

AL-HABAIBEH, A., 2017. The Star Wars 'vaporator farms' that can pull water from desert air. Daily Mail. ISSN 0307-7578

AL-HABAIBEH, A., 2017. New technology brings Star Wars-style desert moisture farming a step closer. The Conversation.

AL-HABAIBEH, A., 2015. Could traditional architecture offer relief from soaring temperatures in the Gulf? The Conversation.

Patent/Published patent application

AL-HABAIBEH, A., 2015. Medical device assembly. GB1515888.4.

AL-HABAIBEH, A., BAKHTYARI-NEJAD-ESFAHANI, A. and STEAD, T.D., 2014. Fluid vessel communication device [JP 2014514016 A]. PCT/GB2012/050530.

AL-HABAIBEH, A., BAKHTYARI-NEJAD-ESFAHANI, A. and STEAD, T.D., 2013. Fluid vessel communication device [US 20133338577 A1]. PCT/GB2012/050530.

AL-HABAIBEH, A., BAKHTYARI-NEJAD-ESFAHANI, A. and STEAD, T.D., 2012. Fluid vessel communication device [WO 2012/120311 A1]. PCT/GB2012/050530.

AL-HABAIBEH, A., BAKHTYARI-NEJAD-ESFAHANI, A. and STEAD, T.D., 2012. Fluid vessel communication device [GB 2488810 A]. GB 1101016.9.

AL-HABAIBEH, A., BAKHTYARI-NEJAD-ESFAHANI, A. and STEAD, T.D., 2012. Fluid vessel communication device [EP 2683428]. EP 2683428.

AL-HABAIBEH, A., 2010. Temperature regulation system for buildings. GB0818313.9 [lodged 7 October 2008].

AL-HABAIBEH, A., HOUDA, M. and ATIOMO, W., 2009. Ultrasound system patent. UK 0903811.8 [lodged March 2009].

Website content

AL-HABAIBEH, A., 2017. New technology brings Star Wars-style desert moisture farming a step closer. Atlanta, GA: Cable News Network (CNN).

Other

AL-HABAIBEH, A., 2004. Applications of Low-cost infrared technology in Manufacturing and Service industries.

This list was generated on Fri Nov 17 01:37:32 2017 UTC.