Items where Author is "Bodaghi, M"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 39.

Journal article

KAMARIAN, S., BODAGHI, M., BARBAZ ISFAHANI, R., SHAKERI, M. and YAS, M.H., 2019. Influence of carbon nanotubes on thermal expansion coefficient and thermal buckling of polymer composite plates: experimental and numerical investigations. Mechanics Based Design of Structures and Machines. ISSN 1539-7734

AKRAMI, R., FOTOUHI, S., FOTOUHI, M., BODAGHI, M., CLAMP, J. and BOLOURI, A., 2019. High-performance bio-inspired composite T-joints. Composites Science and Technology. ISSN 0266-3538

ZOLFAGHARIAN, A., DENK, M., BODAGHI, M., KOUZANI, A.Z. and KAYNAK, A., 2019. Topology-optimized 4D printing of a soft actuator. Acta Mechanica Solida Sinica. ISSN 0894-9166

SOLTANREZAEE, M., BODAGHI, M., FARROKHABADI, A. and HEDAYATI, R., 2019. Nonlinear stability analysis of piecewise actuated piezoelectric microstructures. International Journal of Mechanical Sciences, 160, pp. 200-208. ISSN 0020-7403

SOLTANREZAEE, M., BODAGHI, M. and FARROKHABADI, A., 2019. A thermosensitive electromechanical model for detecting biological particles. Scientific Reports, 9 (1): 11706. ISSN 2045-2322

BODAGHI, M., NOROOZI, R., ZOLFAGHARIAN, A., FOTOUHI, M. and NOROUZI, S., 2019. 4D printing self-morphing structures. Materials, 12 (8): 1353. ISSN 1996-1944

FENG, Y., BODAGHI, M. and LIAO, W.H., 2019. Numerical/experimental assessment of 3D-printed shape-memory polymeric beams. Journal of Applied Polymer Science, 136 (16): 47422. ISSN 0021-8995

BODAGHI, M. and LIAO, W.H., 2019. 4D printed tunable mechanical metamaterials with shape memory operations. Smart Materials and Structures, 28 (4): 045019. ISSN 0964-1726

DAMANPACK, A.R., BODAGHI, M. and LIAO, W.H., 2019. Experimentally validated multi-scale modeling of 3D printed hyper-elastic lattices. International Journal of Non-Linear Mechanics, 108, pp. 87-110. ISSN 0020-7462

DAMANPACK, A.R., BODAGHI, M. and LIAO, W.H., 2018. Snap buckling of NiTi tubes. International Journal of Solids and Structures, 146, pp. 29-42. ISSN 0020-7683

BODAGHI, M., DAMANPACK, A.R. and LIAO, W.H., 2018. Triple shape memory polymers by 4D printing. Smart Materials and Structures, 27 (6): 065010. ISSN 0964-1726

SALIM, M., BODAGHI, M., KAMARIAN, S. and SHAKERI, M., 2018. Free vibration analysis and design optimization of SMA/Graphite/Epoxy composite shells in thermal environments. Latin American Journal of Solids and Structures, 15 (1): e10. ISSN 1679-7817

BODAGHI, M., DAMANPACK, A.R. and LIAO, W.H., 2017. Adaptive metamaterials by functionally graded 4D printing. Materials & Design, 135, pp. 26-36. ISSN 0264-1275

BODAGHI, M., DAMANPACK, A.R., HU, G.F. and LIAO, W.H., 2017. Large deformations of soft metamaterials fabricated by 3D printing. Materials & Design, 131, pp. 81-91. ISSN 0264-1275

DAMANPACK, A.R., BODAGHI, M. and LIAO, W.H., 2017. A robust hyper-elastic beam model under bi-axial normal-shear loadings. International Journal of Non-Linear Mechanics, 95, pp. 287-295. ISSN 0020-7462

KAMARIAN, S., BODAGHI, M., POURASGHAR, A. and TALEBI, S., 2017. Vibrational behavior of non-uniform piezoelectric sandwich beams made of CNT-reinforced polymer nanocomposite by considering the agglomeration effect of CNTs. Polymer Composites, 38: S1, E553-E562. ISSN 0272-8397

DAMANPACK, A.R., BODAGHI, M. and LIAO, W.H., 2017. A finite-strain constitutive model for anisotropic shape memory alloys. Mechanics of Materials, 112, pp. 129-142. ISSN 0167-6636

HU, G.F., DAMANPACK, A.R., BODAGHI, M. and LIAO, W.H., 2017. Increasing dimension of structures by 4D printing shape memory polymers via fused deposition modeling. Smart Materials and Structures, 26 (12): 125023. ISSN 0964-1726

BODAGHI, M., SHAKERI, M. and AGHDAM, M.M., 2017. Passive vibration control of plate structures using shape memory alloy ribbons. Journal of Vibration and Control, 23 (1), pp. 69-88. ISSN 1077-5463

BODAGHI, M., DAMANPACK, A.R. and LIAO, W.H., 2016. Self-expanding/shrinking structures by 4D printing. Smart Materials and Structures, 25 (10): 105034. ISSN 0964-1726

BODAGHI, M., DAMANPACK, A.R., LIAO, W.H., AGHDAM, M.M. and SHAKERI, M., 2016. Modeling and analysis of reversible shape memory adaptive panels. Journal of Intelligent Material Systems and Structures, 27 (12), pp. 1624-1649. ISSN 1045-389X

BODAGHI, M., DAMANPACK, A.R. and LIAO, W.H., 2016. A robust macroscopic model for normal–shear coupling, asymmetric and anisotropic behaviors of polycrystalline SMAs. Smart Materials and Structures, 25 (7): 075019. ISSN 0964-1726

KAMARIAN, S., SHAKERI, M., YAS, M.H., BODAGHI, M. and POURASGHAR, A., 2015. Free vibration analysis of functionally graded nanocomposite sandwich beams resting on Pasternak foundation by considering the agglomeration effect of CNTs. Journal of Sandwich Structures & Materials, 17 (6), pp. 632-665. ISSN 1099-6362

DAMANPACK, A.R., LIAO, W.H., AGHDAM, M.M., SHAKERI, M. and BODAGHI, M., 2015. Micro–macro thermo-mechanical analysis of axisymmetric shape memory alloy composite cylinders. Composite Structures, 131, pp. 1001-1016. ISSN 0263-8223

ZAMANI, H.A., BODAGHI, M., AGHDAM, M.M. and SALEHI, M., 2015. Accurate damping analysis of viscoelastic composite beams and plates on suppressive foundation. Journal of Composite Materials, 49 (18), pp. 2187-2202. ISSN 0021-9983

SHARIFI, S., SHAKERI, M., FAKHARI, H.E. and BODAGHI, M., 2015. Experimental investigation of bitubal circular energy absorbers under quasi-static axial load. Thin-Walled Structures, 89, pp. 42-53. ISSN 0263-8231

BODAGHI, M., SHAKERI, M. and AGHDAM, M.M., 2015. Thermo-mechanical behavior of shape adaptive composite plates with surface-bonded shape memory alloy ribbons. Composite Structures, 119, pp. 115-133. ISSN 0263-8223

ISAVAND, S., BODAGHI, M., SHAKERI, M. and MOHANDESI, J.A., 2015. Dynamic response of functionally gradient austenitic-ferritic steel composite panels under thermo-mechanical loadings. Steel and Composite Structures, 18 (1), pp. 1-28. ISSN 1229-9367

ASADI, H., BODAGHI, M., SHAKERI, M. and AGHDAM, M.M., 2015. Nonlinear dynamics of SMA-fiber-reinforced composite beams subjected to a primary/secondary-resonance excitation. Acta Mechanica, 226 (2), pp. 437-455. ISSN 0001-5970

DAMANPACK, A.R., BODAGHI, M. and LIAO, W.H., 2015. SMA bellows as reversible thermal sensors/actuators. Smart Materials and Structures, 24 (6): 065013. ISSN 0964-1726

DAMANPACK, A.R., BODAGHI, M., LIAO, W.H., AGHDAM, M.M. and SHAKERI, M., 2015. A simple and efficient 1-D macroscopic model for shape memory alloys considering ferro-elasticity effect. Smart Structures and Systems, 16 (4), pp. 641-665. ISSN 1738-1584

DAMANPACK, A.R., BODAGHI, M., AGHDAM, M.M. and SHAKERI, M., 2014. Shape control of shape memory alloy composite beams in the post-buckling regime. Aerospace Science and Technology, 39, pp. 575-587. ISSN 1270-9638

BODAGHI, M., DAMANPACK, A.R., AGHDAM, M.M. and SHAKERI, M., 2014. A robust three-dimensional phenomenological model for polycrystalline SMAs: analytical closed-form solutions. International Journal of Engineering Science, 82, pp. 1-21. ISSN 0020-7225

DAMANPACK, A.R., BODAGHI, M., AGHDAM, M.M. and SHAKERI, M., 2014. On the vibration control capability of shape memory alloy composite beams. Composite Structures, 110, pp. 325-334. ISSN 0263-8223

BODAGHI, M., DAMANPACK, A.R., AGHDAM, M.M. and SHAKERI, M., 2014. Active shape/stress control of shape memory alloy laminated beams. Composites Part B: Engineering, 56, pp. 889-899. ISSN 1359-8368

BODAGHI, M., DAMANPACK, A.R., AGHDAM, M.M. and SHAKERI, M., 2014. Geometrically non-linear transient thermo-elastic response of FG beams integrated with a pair of FG piezoelectric sensors. Composite Structures, 107, pp. 48-59. ISSN 0263-8223

Chapter in book

BAZ, A. and BODAGHI, M., 2018. 6.17 Shape control of composites. In: P.W.R. BEAUMONT and C.H. ZWEBEN, eds., Comprehensive composite materials II. 2nd ed. Amsterdam: Elsevier, pp. 487-500. ISBN 9780081005330

HU, G.F., DAMANPACK, A.R., BODAGHI, M. and LIAO, W.H., 2017. Shape adaptive structures by 4D printing. In: Proceedings of ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, (SMASIS2017), Snowbird, Utah, USA, 18-20 September 2017. Vol. 1. American Society of Mechanical Engineers (ASME). ISBN 9780791858257

Conference contribution

BODAGHI, M., DAMANPACK, A., HU, G. and LIAO, W.-H., 2018. Shape adaptive structures by 4D printed polymers. In: ICAST2018: 29th International Conference on Adaptive Structures and Technologies, Seoul, South Korea, 30 September - 4 October 2018.

This list was generated on Sun Dec 8 01:30:29 2019 UTC.